华清4#泉水溶气体百分含量合计的强震远场前兆特征

华清4#泉水溶气体百分含量合计(QB)的取值范围为100±5.按4舍5入法取整数值,将其分为11个区段.以年为单位,统计QB落在每个区段内的频次.频率分布直方图显示,在QB取值区间内,分区段频率呈近似正态分布.将落入QB频率最高的区段称为轴,将轴在不同区段上位置的变化称为轴漂.研究表明,QB在不同区段上轴的漂移,反映了区域应力场的不同状态.轴落入99区段上,反映的是区域应力场的增强,与远场M≥7.0地震及伴生中强地震、鄂尔多斯块体周边后继中强地震有很好的相关性;轴落入98区段上,反映的是区域应力场的相对稳定;轴落入97区段上,反映的是巨大地震后,区域应力场的调整及中强地震活动格局的变化.文中还阐述了99区段轴值与地震对应关系的几个特征.     

初始中主应力系数对中密粉煤灰动模量阻尼比影响的试验研究

利用土工静力-动力液压三轴-扭转多功能剪切仪,开展了在三向非均等固结状态下的饱和中密粉煤灰循环扭剪试验。着重探讨了初始中主应力系数对饱和中密粉煤灰的动模量和阻尼比特性的影响。试验结果表明：初始中主应力系数对粉煤灰动剪切模量有一定的影响,对阻尼比没有影响。根据仪器量测系统的特点,采用了大小位移计联合测量角位移的方法,不仅能够提高测试精度,而且能够获得完整的动模量和阻尼比随动剪应变幅值的变化过程。     

临汾区块地应力三维数值模拟研究

在地质构造分析和岩石力学性质测试的基础上,进行了临汾区块的地应力有限元三维数值模拟研究,探讨了地应力在区域和层域上的分布规律及其对区内煤层气成藏的影响。研究表明,应力强度总体上随深度递增,断层对应力强度分布具有明显的影响;断层附近应力强度的最大值分布在断层与断层的交叉点、断层与底部硬质岩层界面附近,应力性质在断层夹块内和支断层一侧发生转变出现拉应力区,断层与地表的交点附近也呈现局部拉应力区;煤层软弱带呈现应力降低。研究区的地应力分布特征有利于煤层气从深部向浅部运移,并在背斜轴部相对富集。     

Implicit integration under mixed controls of a breakage model for unsaturated crushable soils

This paper discusses a series of stress point algorithms for a breakage model for unsaturated granular soils. Such model is characterized by highly nonlinear coupling terms introduced by breakage‐dependent hydro‐mechanical energy potentials. To integrate accurately and efficiently its constitutive equations, specific algorithms have been formulated using a backward Euler scheme. In particular, because implementation and verification of unsaturated soil models often require the use of mixed controls, the incorporation of various hydro‐mechanical conditions has been tackled. First, it is shown that the degree of saturation can be replaced with suction in the constitutive equations through a partial Legendre transformation of the energy potentials, thus changing the thermomechanical state variables and enabling a straightforward implementation of a different control mode. Then, to accommodate more complex control scenarios without redefining the energy potentials, a hybrid strategy has been used, combining the return mapping scheme with linearized constraints. It is shown that this linearization strategy guarantees similar levels of accuracy compared with a conventional strain–suction‐controlled implicit integration. In addition, it is shown that the use of linearized constraints offers the possibility to use the same framework to integrate a variety of control conditions (e.g., net stress and/or water‐content control). The convergence profiles indicate that both schemes preserve the advantages of implicit integration, that is, asymptotic quadratic convergence and unconditional stability. Finally, the performance of the two implicit schemes has been compared with that of an explicit algorithm with automatic sub‐stepping and error control, showing that for the selected breakage model, implicit integration leads to a significant reduction of the computational cost. Such features support the use of the proposed hybrid scheme also in other modeling contexts, especially when strongly nonlinear models have to be implemented and/or validated by using non‐standard hydro‐mechanical control conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

Fracture mechanics analysis of multiple cracks in anisotropic media

This paper presents a single‐domain boundary element method (BEM) for linear elastic fracture mechanics analysis in the two‐dimensional anisotropic material. In this formulation, the displacement integral equation is collocated on the un‐cracked boundary only, and the traction integral equation is collocated on one side of the crack surface only. A special crack‐tip element was introduced to capture exactly the crack‐tip behavior. A computer program with the FORTRAN language has been developed to effectively calculate the stress intensity factors of an anisotropic material. This BEM program has been verified having a good accuracy with the previous researches. Furthermore, by analyzing the different anisotropic degree cracks in a finite plate, we found that the stress intensity factors of crack tips had apparent influence by the geometry forms of cracks and media with different anisotropic degrees. Copyright © 2010 John Wiley & Sons, Ltd.     

漫湾水库蓄水前后库区地震活动性与构造应力场分析

对漫湾水库蓄水诱发地震作了分析，结果表明，蓄水后库区小震频次明显增加，近距离地震明显增多，在蓄水首次达到高水位和由高水位突降至低水位时，诱发了最强地震。表明蓄水对库区构造应力场产生了影响，使得局部应力场较区域构造应力场作用方向出现明显偏转，作用方式发生改变，呈现较大的垂直作用效应，节面错动出现较大正倾滑动分量。     

牙鲆鱼苗长途运输技术的试验研究

本实验对10个批次，总数为19047尾的不同规格和产地的牙鲆鱼苗长途运输效果进行了研究。结果表明，规格为9-12cm的鱼苗，在水温6－12℃，运输时间为35－50h，采用空运和低温活水车运输，运输死亡率为664尾，死亡率为3.39%，低温活水车短途运输是可行的，尽管长途车运方式成本较低，但由于应激强度较大，对鱼苗的生长性能影响较为严重，驯养10d累计死亡率最高达18.1%，这种模式不可取。低温（6℃）、小规格（9cm)的空运较适合牙鲆鱼苗长途运输。此外，本文还就运输应激反应、预防措施和药物防治进行详细的讨论。     

Stress Sharing Behavior and Its Mechanism during Consolidation Process in Composite Ground Improved by Sand Compaction Piles with Low Replacement Area Ratio

In order to accurately design a sand compaction pile (SCP) with low replacement area ratio, it is important to understand the mechanical interaction between the sand pile and clay ground and its mechanism during consolidation process in composite ground. In this article, therefore, a series of numerical analyses on composite ground improved by SCP with low replacement area ratio were carried out. The applicability of numerical analyses, in which an elasto-viscoplastic consolidation finite element method was applied, were confirmed by comparing the results obtained from a series of laboratory model tests with the composite ground improved by SCP. Through the results of the numerical analyses, mechanical behavior of the sand pile and clay in composite ground during consolidation is elucidated, together with a stress sharing mechanism between sand pile and clay.     

Tides in the Tongan Region of the Pacific Ocean

Tidal levels and currents in the Tongan region of the Pacific were simulated using a two-dimensional frequency-domain finite element model. The eight major diurnal and semidiurnal tidal constituents were modeled successfully, using open boundary conditions taken from a global tidal model based on the Topex/Poseidon satellite altimeter. Comparison of model results with observations from the single tide gauge site in the area were later used to adjust the boundary conditions. The validity of omitting horizontal eddy viscosity from the finite element model was checked by running an equivalent finite difference model. The results show that although the submarine Tongan ridge does not appear to trap tidal energy, there are residual tidal currents and possible recirculations which are capable of influencing biological productivity around Tonga. The model results are reduced to a simple method for predicting tidal heights in outlying areas, based only on the tidal calendar for the capital, Nuku'alofa.