Thickness distribution and extent of sea ice and snow in Prydz Bay and surrounding waters observed in 2012/2013 austral summer

Three ship-based observational campaigns were conducted to survey sea ice and snow in Prydz Bay and the surrounding waters(64.40°S–69.40°S, 76.11°E–81.29°E) from 28 November 2012 to 3 February 2013. In this paper, we present the sea ice extent and its variation, and the ice and snow thickness distributions and their variations with time in the observed zone. In the pack ice zone, the southern edge of the pack ice changed little, whereas the northern edge retreated significantly during the two earlier observation periods. Compared with the pack ice, the fast ice exhibited a significantly slower variation in extent with its northernmost edge retreating southwards by 6.7 km at a rate of 0.37 km?d-1. Generally, ice showed an increment in thickness with increasing latitude from the end of November to the middle of December. Ice and snow thickness followed an approximate normal distribution during the two earlier observations(79.7±28.9 cm, 79.1±19.1 cm for ice thickness, and 11.6±6.1 cm, 9.6±3.4 cm for snow thickness, respectively), and the distribution tended to be more concentrated in mid-December than in late November. The expected value of ice thickness decreased by 0.6 cm, whereas that of snow thickness decreased by 2 cm from 28 November to 18 December 2012. Ice thickness distribution showed no obvious regularity between 31 January and 3 February, 2013.     

云顶以下臭氧对TOMS反演臭氧总量的影响及反演方法的理论研究

目前紫外后向散射反演臭氧总量的所有算法,都将云考虑成不透明的Lambertian反射体,并假定云顶有效反照率不随波长的变化而变化.然而本文通过模拟计算发现,由于云散射、瑞利散射、臭氧吸收三种作用的综合结果,云顶的有效反照率是与波长相关的,即使光学厚度比较大的云,辐射也可由云顶继续向下传输,因而会受到云顶以下臭氧吸收的影响.用V7方法进行反演,模拟计算结果表明：云的出现使得云顶以下,特别是云内光程增强,导致紫外波段的臭氧吸收衰减增大,所以反演出的臭氧总量值比真实值偏大,本文称这种现象为“云吸收效应”,并讨论了该效应的影响因子.最后,在辐射传输模拟的基础上建立一套反演算法,大大减弱了“云吸收效应”的影响.     

Crustal complexity in the Lachlan Orogen revealed from teleseismic receiver functions

There is an ongoing debate about the tectonic evolution of southeast Australia, particularly about the causes and nature of its accretion to a much older Precambrian core to the west. Seismic imaging of the crust can provide useful clues to address this issue. Seismic tomography imaging is a powerful tool often employed to map elastic properties of the Earth's lithosphere, but in most cases does not constrain well the depth of discontinuities such as the Mohorovi?i? (Moho). In this study, an alternative imaging technique known as receiver function (RF) has been employed for seismic stations near Canberra in the Lachlan Orogen to investigate: (i) the shear-wave-velocity profile in the crust and uppermost mantle, (ii) variations in the Moho depth beneath the Lachlan Orogen, and (iii) the nature of the transition between the crust and mantle. A number of styles of RF analyses were conducted: H-K stacking to obtain the best compressional–shear velocity (V _P /V _S) ratio and crustal thickness; nonlinear inversion for the shear-wave-velocity structure and inversion of the observed variations in RFs with back-azimuth to investigate potential dipping of the crustal layers and anisotropy. The thick crust (up to 48 km) and the mostly intermediate nature of the crust?mantle transition in the Lachlan Orogen could be due to the presence of underplating at the base of the crust, and possibly to the existing thick piles of Ordovician mafic rocks present in the mid and lower crust. Results from numerical modelling of RFs at three seismic stations (CAN, CNB and YNG) suggest that the observed variations with back-azimuth could be related to a complex structure beneath these stations with the likelihood of both a dipping Moho and crustal anisotropy. Our analysis reveals crustal thickening to the west beneath CAN station which could be due to slab convergence. The crustal thickening may also be related to the broad Macquarie volcanic arc, which is rooted to the Moho. The crustal anisotropy may arise from a strong N–S structural trend in the eastern Lachlan Orogen and to the preferred crystallographic orientation of seismically anisotropic minerals in the lower and middle crust related to the paleo-Pacific plate convergence.     

Modelling of groundwater flow in heterogeneous porous media by finite element method

The HySuf‐FEM code (Hydrodynamic of Subsurface Flow by Finite Element Method) is proposed in this article in order to estimate the spatial variability of the transmissivity values of the Berrechid aquifer (Morocco). The calibration of the model is based on the hydraulic head, hydraulic conductivity and recharge. Three numerical tests are used to validate the model and verify its convergence. The first test case consists in using the steady analytical solution of the Poisson equation. In the second, the model has been compared with the hydrogeological system which is characterized by an unconfined monolayer (isotropic layer) and computed by using PMWIN‐MODFLOW software. The third test case is based on the comparison between the results of HySuf‐FEM and the multiple cell balance method in the aquifer system with natural boundaries case. Good agreement between the Hydrodynamic of Subsurface Flow, the numerical tests and the spatial distribution of the thickening of the hydrogeological system is deduced from the analysis and the interpretations of hydrogeological wells. Copyright © 2011 John Wiley & Sons, Ltd.     

Dynamic analysis of a cylindrical casing–cement structure in a poroelastic stratum

The transient response of a cylindrical casing–cement structure in a poroelastic stratum under dynamic radial tractions is one of the significant issues during the analysis of downhole operations and the selection of safe material. Based on the Biot theory and general elastic mechanics, this paper gives a set of exact solutions for radial displacement, stresses for the casing–cement system and the pore pressure of the infinite surrounding poroelastic stratum in the Laplace transform space. Solutions are presented for three different types of transient radial loadings acting on the surface of casing, i.e., suddenly applied constant load, gradually applied step load and triangular pulse load. Time domain solutions are obtained using a reliable numerical method of inverse Laplace transforms. A detailed parametric study about the transient response is presented both at the casing–cement interface and the cement–stratum interface, and the distributions of the pore pressure and the effective stresses in the stratum are also examined. Copyright © 2017 John Wiley & Sons, Ltd.     

利用位场及其高阶导数的功率谱计算岩层的深度与厚度

本文导出了利用重力与磁异常及其高阶导数的功率谱计算密度体和磁性体上顶与下底埋深的近似公式,还提供了利用垂向或水平导数谱计算深度的方法。理论模型的试验结果表明,由近似公式计算的精度可以满足实际需要。本文最后根据一条重力剖面资料,计算了密度层上、下界面。     

砂岩风化晕厚度在广东晚更新世测年中的应用

广东地区河流阶地和冲积扇沉积物中砂岩砾石风化晕随时间增厚。风化晕生长速度呈指数衰减,并拟合于下列公式:T 1485D4.13这里T=时间,以年表示,D=沉积物表部约50块砾石风化晕厚度的加权平均值,以毫米表示。利用风化晕厚度确定出广东地区河流第一和第二级阶地分别为1000—13300年和8600—26500年,肇庆盆地北部山前地带第Ⅰ和第Ⅱ级冲积扇分别为51500年和24400年。同时,在构造地貌变形分析的基础上,估算出本区三条主要北东向断裂带在晚更新世—中全新世的垂直断层作用速度为0.6—1.6毫米/年,中全新世甚或晚更新世晚期以来的活动速度极小     

云南腾冲山寨盆地水下冲积扇特征及对砂锡的控矿作用

水下冲积扇是山间谷地被堵截堰塞,山麓堆积进入水盆地的一种特殊“相”,以重力流堆积为主体,间夹湖沼和上迭河流沉积。熔岩流多次堵塞增高,堰塞坝的侵蚀和盆地的沉积充填,这三种因素综合作用的结果,形成了具有一定厚度的不同沉积类型组合。各类沉积因其搬运分选机制不同而形成不同的聚锡能力,决定了对砂锡的控矿作用。