评“河南西峡盆地产恐龙蛋地层研究新进展”

＂河南西峡盆地产恐龙蛋地层研究新进展＂一文主张用＂走马岗组＂、＂赵营组＂和＂六爷庙组＂来替代正式命名的一套地层名称,这样做既不符合地层命名原则,又易引起新的不必要的混乱。在晚白垩世时西峡、淅川两盆地在岩性组合特征上是相似的,浙川盆地并不是＂岩性特征简单＂,西峡盆地也不是＂岩性复杂＂。西峡盆地晚白垩世＂红层＂应采用＂高沟组、马家村组和寺沟组＂这套地层名称。     

赣东北鹅湖岭组的再认识

在分析赣东北鹅湖岭组及有关地层的地质特征、地层划分现状及产生分岐的原因的基础上,提出以岩性、岩相为划分依据,将鹅湖岭组与喷发相相对应,将其下界、上界分别置于沉积喷发相与喷发相、喷发相与喷发沉积相的相变界面上。从而将北京地质学院指定的打鼓顶组建组剖面上的"打鼓顶组"并入鹅湖岭组;将赣东北其它地区的鹅湖岭组下界由安山岩层顶界处上移至安山岩层之上灰绿色砂岩层的顶界处,将铅山一上饶一带鹅湖岭组上界下移至原鹅湖岭组上部的底界处。     

Large-scale rheomorphic shear deformation in Miocene peralkaline ignimbrite E,Gran Canaria

the single ignimbrite cooling unit E (average thickness, 28 m; volume, ca. 30 km₃) forms the uppermost member of the Miocene Upper Mogán Formation on Gran Canaria. It is strongly chemically zoned from basal, first-erupted comendite (peralkaline rhyolite) to late-erupted trachyte, and, apart from an upper trachytic zone, it is densely welded. E was emplaced onto a surface inclined ca. 2–5° from the source caldera. Detailed mapping of key sections, up to 300 m long, exposed in barranco walls, ca. 10 km from the caldera margin, reveals structures that are interpreted to have been produced by rheomorphic deformation of the ignimbrite along shear zones. The shear zones formed within the lower-viscosity comenditic tuff. Extensional structures include mega-boudinage and decapitated sequences and compression resulted in sequence repitition by overthrusting. Mechanisms traditionally thought to be important during rheomorphic deformation of welded tuffs (compaction, lateral creep, folding, vertical density-driven diapirism) cannot account for these features, which reflect lateral (post-compactional) rheomorphic movement locally in excess of 800 m. We suggest the following sequence of events: emplacement of the several flow units; compaction, with little lateral movement; rheomorphic deformation. During and after compaction, layers of secondary porosity developed within the comenditic tuff, possibly where upward escape of gas was prevented by overlying, relatively impermeable layers of densely compacted ignimbrite. These structurally weak layers of high porosity subsequently acted as shear zones.     

Long-term prediction of intermediate depth earthquakes in the southern Aegean region based on a time-predictable model

Repeat times of strong intermediate depth (60 km h 180 km) earthquakes have been determined by the use of instrumental and historical data for six seismogenic sources in the Benioff zone of the southern Aegean area. For four of these sources, at least two interevent times (three mainshocks) are available for each source. By using the repeat times for these four sources, the following relation has been determined: logT _t = 0.20M _min + 0.19M _p +a, whereT _t is the repeat time (in years),M _min the surface wave magnitude of the smallest earthquake considered,M _p the magnitude of the preceding mainshock and a parameter which varies from source to source. A multilinear correlation coefficient equal to 0.91 was determined for this relation, which indicates that the time predictable model holds to a satisfactory degree for the strong mainshocks of intermediate focal depth in the southern Aegean.By assuming that the ratioT/T _t, whereT is the observed andT _t the calculated repeat time, follows a lognormal distribution, the conditional probabilities for the occurrence of strong (M _s 6.5) and very strong (M _s 7.5) earthquakes during the period 1991–2001 in these four seismogenic sources have been calculated. These probabilities are very high (P > 0.9) for the strong and high (P > 0.5) for the very strong intermediate depth earthquakes which occur in the three sources of the shallower (h < 100 km) part of the Benioff zone where coupling occurs between the front parts of the Mediterranean lithosphere (downgoing) and the Aegean lithosphere.     

北京云蒙山地区花岗岩穹隆及伸展构造的探讨

北京云蒙山花岗岩为一中生代侵入的花岗岩穹隆,花岗岩穹隆的叶理普遍发育,叶理轨迹基本平行于穹隆的外部边界,并显示出从核部到边部逐渐增强,东南侧明显强于西北侧的特点。变形构造研究显示,花岗岩穹隆的边部及围岩中普遍存在不同层次及不同运动方向的伸展构造。东南侧以具河防口－水峪伸展型韧性剪切带为特征,剪切运动标志显示为从ＮＷ－ＳＥ的正剪切运动,有限应变分析估算其剪切位移量在１０ｋｍ以上,剪切带上部被河防口正     

A Step Towards Evaluation of the Seismic Response Reduction Factor in Multistorey Reinforced Concrete Frames

A seismic nonlinear time-history analysis was made for four-, six-, and eight-storey reinforced concrete buildings. These buildings were made as three-dimensional space frame structures with shear walls in both orthogonal directions. They have five bays with 4.8 m spacing each in the horizontal direction, and three bays with 4.2 m spacing each in the transversal direction. The frames were designed according to the Jordanian Seismic Code of practice for Seismic Zones 4, 3, 2, and 1 as proposed for Jordan by several authors. Time-history analysis was made using the El Centro (N-S) earthquake record of May 1940 as an actual earthquake excitation. The response reduction factor (R) that primarily consists of two factors that are the ductility reduction (Rµ) and the overstrength (), is obtained. It has been seen that the seismic zoning has a slight effect on the ductility reduction factor for different buildings, since it ranges from Zone 4 to Zone 1 as 2.37 to 2.52, 1.72 to 1.78, and 1.14 to 1.18 for four-, six-, and eight-storey buildings, respectively. Moreover, it is observed that, for different buildings and different seismic zones, the ductility reduction factor (Rµ) is slightly different from the system ductility factor (µ) especially for higher values of µ (i.e., Rµ µ). The response reduction factor, called overstrength (), was evaluated. The overstrength factor was found to vary with seismic zones (Z) , number of stories, and design gravity loads. However, the dependency on seismic zones was the strongest. The average overstrength of these buildings in Zones 4 and 1 was 2.61 and 6.94, respectively. The overstrength increased as the number of storeys decreased: overstrength of a four-storey building was higher than an eight-storey building by 36% in Zone 4, and 39% in Zone 1. Furthermore, buildings of the three heights had an average overstrength 165.9% higher in Zone 1 than in Zone 4. These observations have a significant implications for the seismic design codes which currently do not take into account the variation of the response reduction factor, R (i.e., ductility reduction factor times overstrength).     

哀牢山-红河剪切带的热年代学研究——多重扩散域模式的应用实例

洛弗拉等人(1989)把Dodson(1973)建立的单一扩散域模式扩展成矿物扩散域不连续分布的模式,即多重扩散域模式,与之对应具有某一封闭温度范围,因此利用单个K-长石矿物样品可以揭示更长时间段上的冷却过程。对云南哀牢山-红河剪切带的K-长石样品(FA-2-1)进行40Ar/39Ar同位素分析,利用多重扩散域模式,揭示在距今约20～19Ma问该带存在一快速冷却过程,这与西藏南部曲水地区快速抬升的时间是一致的     

短周期仪器记录在远震分析中的应用

地震泼由多种频率成份组成,在其传播过程中。由于地球介质的滤波作用,随着传播距离的增大。高频成份逐渐被衰减。周期越大的成份传播越远。因此,在地震观测上,不同频带的地震仪用于观测不同震中距范围的地震,使仪器较好地响应,就我国台网而言,短周期仪用于地方震、近震的监测,中长周期仪和长周期仪用于远震,极远震的监测,其中长周期仪偏重于记录极远震。但作者在实际分析工作中注意到,短周期仪的记录应用于远震,极远震的分析,显示出独特的作用,充分挖掘和利用短仪资料,将会更加丰富远震、极远震的震相资料。本文以高台地震台的资料为依据,从震中距和震级角度,与中长仪和长仪作比较,对短仪记录远震、极远震的震相及特征作了统计分析与初步探讨,并对新疆地区“影区”地震S波的记录、日本地区地震_PPcP等震相的出现提出了现象的存在,给出了相应的观测结果,以待步一步研究。     

Scattering of elastic waves by a fracture zone containing randomly distributed cracks

We theoretically study the scattering ofP, SV andSH waves by a zonal distribution of cracks, which simulates a fault fracture zone. An investigation is conducted how the geometrical properties of the crack distribution and the frictional characteristics of the crack surface are reflected in the attenuation and dispersion of incident waves, as well as in the amplitudes of the transmitted and reflected waves from the zone. If the crack distribution within the fault zone changes temporally during the preparation process of the expected earthquake, it will be important for earthquake prediction to monitor it, utilizing the scattering-induced wave phenomena.We consider the two-dimensional problem. Aligned cracks with the same length are assumed to be randomly distributed in a zone with a finite width, on which elastic waves are assumed to be incident. The distribution of cracks is assumed to be homogeneous and sparse. The crack surface is assumed to be stress-free, or to undergo viscous friction; the latter case simulates fluid-filled cracks. The opening displacement of the crack is assumed to be negligibly small. The idea of the mean wave formalism is employed in the analysis, and Foldy's approximation is assumed.When the crack surface is stress-free, it is commonly observed for every wave mode (P, SV andSH) that the attenuation coefficientQ ^–1 peaks aroundka1, the phase velocity is almost independent ofk in the rangeka<1 and it increases monotonically withk in the rangeka>1, wherek is the intrinsicS wavenumber anda is the half length of the crack. The effect of the friction is to shift the peak ofQ ^–1 and the corner of the phase velocity curve to the low wavenumber range. The high wavenumber asymptote ofQ ^–1 is proportional tok ^–1 independently of model parameters and the wave modes. If the seismological observation thatQ ^–1 ofS waves has a peak at around 0.5 Hz in the earth's crust is combined with our results, the upper limit of crack size within the crust is estimated about 4 km. The information regarding the transmitted and reflected waves, such as the high wavenumber limit of the amplitude of the transmitted wave etc., allows estimation of the strength of the friction.