图象分析在岩石矿物研究中的应用

本文论述图象分析在岩石矿物学中进行自动和半自动定量统计的简要原理、应用软件程序、操作要点、实例分析、应用范围和方法等。     

盐湖中盐类矿物沉积过程中氯同位素效应的初步研究

采用Ｃｓ２Ｃｌ＋离子正热电离质谱测定氯同位素的方法，初步研究了盐湖卤水中盐类矿物结晶过程中的氯同位素分馏．研究结果表明，在自然条件下，盐类矿物自盐湖卤水中结晶时，３７Ｃｌ优先进入固相，这是造成盐湖卤水中氯同位素组成变化的重要因素．但在实验室条件下，盐类矿物自盐湖卤水中快速结晶时，则有相反的氯同位素分馏发生，即３５Ｃｌ优先进入固相，本文初步讨论了这种绝然相反的氯同位素分馏的机理．     

Kerogen-mineral reactions at raised temperatures in the presence of water

Kerogen has been artificially matured under “hydrous pyrolysis” conditions in the presence of various minerals in order to investigate the influence of the latter on the organic products. In addition to three clay minerals (montmorillonite, illite, kaolinite), calcium carbonate and limonite were also employed as inorganic substrates. Kerogen (Type II) isolated from the Kimmeridge Blackstone band was heated in the presence of water and a 20-fold excess of mineral phase at two different temperatures (280 and 330°C) for 72 hr. Control experiments were also carried out using kerogen and water only and kerogen under anhydrous conditions. This preliminary study describes the bulk composition of the pyrolysates with detailed analyses of the aliphatic hydrocarbon distributions being provided by gas chromatography and combined gas chromatography-mass spectrometry.In the 280°C experiments, considerably more organic-soluble pyrolysate (15% by weight of original kerogen) was produced when calcium carbonate was the inorganic phase. At 330°C, all samples generated much greater amounts of organic-soluble products with calcium carbonate again producing a large yield (40% wt/wt). Biomarker epimerisation reactions have also proceeded further in the 330°C pyrolysate formed in the presence of calcium carbonate than with other inorganic phases. Implications of these and other observations are discussed.     

样品重量在矿物热分析中的作用

目前,热分析的发展趋向于微量化,但样品重量过少时有些矿物差热曲线的形态特征就要发生改变。本文从实践的结果论述样品重量与差热曲线、热量曲线特征之间的关系,以寻求合理的样品重量。     

The Fedorivka layered intrusion (Korosten Pluton, Ukraine): An example of highly differentiated ferrobasaltic evolution

This study documents the petrography and whole-rock major and trace element geochemistry of 38 samples mainly from a drill core through the entire Fedorivka layered intrusion (Korosten Pluton), as well as mineral compositions (microprobe analyses and separated mineral fraction analyses of plagioclase, ilmenite, magnetite and apatite) of 10 samples. The Fedorivka layered intrusion can be divided into 4 lithostratigraphic units: a Lower Zone (LZ, 72 m thick), a Main Zone (MZ, 160 m thick), and an Upper Border Zone, itself subdivided into 2 sub-zones (UBZ₂, 40 m thick; UBZ₁, 50 m thick). Igneous lamination defines the cumulate texture, but primary cumulus minerals have been affected by trapped liquid crystallization and subsolidus recrystallization. The dominant cumulus assemblage in MZ and UBZ₂ is andesine (An_39–42), iron-rich olivine (Fo_32–42), augite (En_29–35Fs_24–29Wo_42–44), ilmenite (Hem_1–6), Ti-magnetite (Usp_52–78), and apatite. The data reveal a continuous evolution from the floor of the intrusion (LZ) to the top of MZ, due to fractional crystallization, and an inverse evolution in UBZ, resulting from crystallization downwards from the roof. The whole-rock Fe/Mg ratio and incompatible element contents (e.g. Rb, Nb, Zr, REE) increase in the fractionating magma, whereas compatible elements (e.g. V, Cr) steadily decrease. The intercumulus melt remained trapped in the UBZ cumulates due to rapid cooling and lack of compaction, and cumulus mineral compositions re-equilibrated (e.g. olivine, Fe–Ti oxides). In LZ, the intercumulus melt was able to partially or totally escape. The major element composition of the MZ cumulates can be approximated by a mixing (linear) relationship between a plagioclase pole and a mafic pole, the latter being made up of all mafic minerals in (nearly) constant relative proportions. By analogy with the ferrobasaltic/jotunitic liquid line of descent, defined in Rogaland, S. Norway, and its conjugated cumulates occurring in the Transition Zone of the Bjerkreim-Sokndal intrusion (Rogaland, a monzonitic (57% SiO₂) melt is inferred to be in equilibrium with the MZ cumulates. The conjugated cumulate composition falls (within error) on the locus of cotectic compositions fixed by the 2-pole linear relationship. Ulvöspinel is the only Ti phase in some magnetites that have been protected from oxidation. QUIlF equilibria in these samples show that magnetite and olivine in MZ have retained their liquidus compositions during subsolidus cooling. This permits calculation of liquidus fO₂ conditions, which vary during fractionation from ΔFMQ = 0.7 to − 1.4 log units. Low fO₂ values are also evidenced by the late appearance of cumulus magnetite (Fo₄₂) and the high V³⁺-content of the melt, reflected in the high V-content of the first liquidus magnetite (up to 1.85% V).     

Mineral formation in an acid pit lake from a high-sulfidation ore deposit: Kirki, NE Greece

Open pit mining of base-metals from the high-sulfidation epithermal type deposit of Kirki (Thrace, NE Greece) resulted in the formation of an acid pit lake by infilling of the open cast by rain and draining waters after mine closure. The high toxic metals content of the ore, the limited buffering capacity of host rocks and the direct exposure of the ore zone to weathering result in an intense release of metals into the pit lake. The acidic and oxidative pit lake waters show high concentrations of trace metals. A mineral precipitate, covering the floor of the pit lake, comprises secondary anglesite, several species of the jarosite-group, rozenite, melanterite, wroewolfeite, gypsum, bukovskyite, beaverite, scorodite and minor goethite. The mineral precipitate presents a significant heavy metal content indicating effective removal of metals from the acid waters. Compared to other pit lakes in high-sulfidation type deposits it has a higher metal load, consistent with the mineralogy and grade of ore in pit walls.     

Retrieval and interpretation of precipitation rates generated from the composition of the Merouane Chott ephemeral lake

Merouane Chott ephemeral lake is an ideal natural system for studying mineral dissolution and precipitation rates because (1) it undergoes annual cycles of filling and complete evaporation, and (2) it has a simple, well-defined hydrology. The major element concentrations of Merouane Chott lake waters have been measured weekly from January to June 2003. These concentrations are used together with estimates of the chott lake volume to calculate the temporal evolution of the total mass of these major elements. Dividing the first derivative of these masses with respect to time by the chott surface area yields precipitation rate estimates for halite, calcite, gypsum, and K–Mg salts during the complete evaporation of the lake. These rates are compared with the saturation indexes of these minerals to deduce the degree to which they are consistent with laboratory measured rates available in the literature.     

Pre-concentration and residual bitumen removal from Athabasca oilsands froth treatment tailings by a Falcon centrifugal concentrator

Both froth flotation and centrifugal concentration were used to pre-concentrate the oil sands froth treatment tailings prior to the recovery of heavy minerals (titanium and zirconium minerals). Over 90% of the heavy minerals were recovered into a bulk flotation concentrate that was about 50% of the feed mass at 85 °C without any reagents. The same recoveries were obtained at 50 °C with the addition of NaOH and/or sodium oleate. However, the flotation concentrate also recovered over 90% of the residual bitumen and much of the clays/slimes. Subsequent treatment of the flotation concentrate such as dewatering and bitumen removal would be difficult due to these residual bitumen and clays. On the other hand, a SB40 centrifugal concentrator recovered over 85% of the heavy minerals but less than 30% of the residual bitumen. With improved liberation the recovery of the residual bitumen into the concentrate could be further reduced. The particle sizes of the SB40 concentrates were also larger than the flotation concentrates, making subsequent processing much easier.     

Characteristics and origins of primary fluids and noble gases in mantle-derived minerals from the Yishu area, Shandong Province, China

springerlink.com Studies of mantle fluids are currently one of the hot topics in the earth science, greatly contributing to re-vealing origins and evolutions of fluids. In general, the concept of mantle fluids refers to their active compo-nents, such as CO2, H2O, N2, etc., while the noble gases inert in chemical properties belong to another research system. Due to their marked differences in various fluid sources of the Earth[1], the isotopic sig-natures of He and Ar have been widely used a…     

Effect of high-pressures on the electrical resistivity of natural zeolites from Deccan Trap, Maharashtra, India

We report here the electrical resistivity measurements on two natural zeolites–natrolite and scolecite (from the Killari borehole, Maharashtra, India) as a function of pressure up to 8 GPa at room temperature. High-pressure electrical resistivity studies on hydrous alumino-silicate minerals are very helpful in understanding the role of water in deep crustal conductivities obtained from geophysical models. The results obtained by magneto-telluric (MT) soundings and direct current resistivity surveys, along with the laboratory data on the electrical resistivity of minerals and rocks at high-pressure–temperature are used to determine the electrical conductivity distribution in continental lithosphere. The electrical resistivity of natural natrolite decreases continuously from 2.9 × 10⁹ Ω cm at ambient condition to 7.64 × 10² Ω cm at 8 GPa, at room temperature. There is no pressure-induced first order structural phase transitions in natrolite, when it is compressed in non-penetrating pressure transmitting medium up to 8 GPa. On the other hand scolecite exhibits a pressure-induced transition, with a discontinuous decrease of the electrical resistivity from 2.6 × 10⁶ to 4.79 × 10⁵ Ω cm at 4.2 to 4.3 GPa. The observed phase transition in scolecite is found to be irreversible. Vibrational spectroscopic and X-ray diffraction studies confirm the amorphous nature of the high-pressure phase. The results of the present high-pressure studies on scolecite are in good agreement with the high-pressure Raman spectroscopic data on scolecite. The thermo gravimetric studies on the pressure-quenched samples show that the samples underwent a pressure-induced partial dehydration. Such a pressure-induced partial dehydration, which has been observed in natural scolecite could explain the presence of high conductive layers in the earth's deep-crust.