Flow through anisotropic networks

This paper presents an analysis of Hagen-Poiseulle flow through plane random anisotropic networks of interconnected channels. Macroscopic permeability tensor of the network is expressed in terms of statistico-geometrical characteristics like the degree of anisotropy in channel orientations, average co-ordination number of the network and first two moments of channel length distribution. Analytical results are illustrated and verified using numerical analysis of flow in a simulated random network. The emphasis of the paper is on the effects of anisotropy on distributions of flow rates in channels. It is shown that, due to anisotropy the maximum flow rate generally occurs in channels that are not aligned along the direction of the macroscopic pressure gradient.     

涡旋诱发重联模型（Ⅰ）——动力学特性

本文首先从理论上系统地研究了涡旋诱发重联的基本动力学特性.包括:涡旋诱发重联的物理机制;Kelvin-Helmholtz（K-H）不稳定性和撕裂模不稳定性耦合过程;磁流体涡管的基本特性;不同尺度涡旋间的相互作用,动能和磁能间的转化及准稳态时流线、磁力线、等涡度线和等电流密度线的相似性等.用二维MHD数值模拟方法研究了上述一些特性,并与理论分析结论进行了比较.结果表明,模拟结果证实了理论推论.涡旋诱发重联是产生局部磁场重联的重要机制之一,该模型在磁顶区的应用将另文发表.     

下扬子江苏地区P_n残差与上地幔波速各向异性

本文搜集江苏台网1982年-1987年2月间发生在江苏及其邻近地区103次地震的1047个P_n数据,经过静校正和质量分类,重新计算了震中距.选择灌云台为参考台,对一次地震的P_n数据,其它台均减去参考台的数据,成功地消除了与震源参数不确定有关的误差.处理中采用质量加权,获得了上地幔平均速度、大部分台P_n残差以及不同方位上P_n视速度估计值. 按Backus给出的波速各向异性的公式,求出江苏地区P_n速度与方位之间有2％左右的速度各向异性,最大方向和对称方向近南北,最小方向为北东东.推断其成因是由于白垩纪至第三纪期间壳下岩石圈北南向流变引起橄榄石晶体从优定向的结果.这为苏北盆地及下扬子碳酸盐岩地区地质构造形成发展动力学的建立提供了有利的深部依据.     

新丰江水库区1989年11月26日4.5级地震的主要特征

本文总结分析了发生在新丰江水库老震区，距1962年6.1级主震27年的1次4.5级地震的活动和特点，认为此次4.5级地震及其伴生的小震群仍系新丰江水库诱发地震序列的中晚期强余震。     

Application of stress-pore pressure coupling theory for porous media to the Xinfengjiang reservoir earthquakes

Theory of the coupling of stress-pore pressure in the saturated, elastic porous media is used in the study of the formation mechanism of the Xinfengjiang reservoir-induced earthquakes. Based on the results, it is believed that compared with the mechanism of additional stress in the vicinity of the reservoir, the mechanism of the coupling of additional stress and pore pressure may be more well-founded for the occurrence of reservoir-induced earthquakes.     

Investigation of electrical anisotropy in the deep borehole KTB

Information about electrical anisotropy in and around the deep borehole of the German Continental Deep Drilling Program (KTB) has been acquired using three different methods: (1) Under surface temperature and pressure conditions, the azimuthal dependence of resistivity has been measured in horizontal planes perpendicular to the axes of drill cores. (2) Simulated in-situ conditions (high temperature and pressure) have been applied to mini cores drilled at different orientations to structural features such as foliation. The resistivity was then measured in the direction of the mini cores' long axes. (3) Under quasi-in-situ (downhole) conditions, the azimuthal dependence of resistivity has been measured in horizontal planes using the Azimuthal Resistivity Imager (ARI), a down hole logging tool.These investigations have shown that electrical anisotropy is strongly related to structural features. The anisotropy of gneisses is the highest due to the strong foliation (averaged anisotropy factor 2.8). Lamprophyres are most isotropic (factor 1.2). Most rocks from KTB are amphibolites with intermediate anisotropies (factor 1.3). The anisotropies measured under surface temperature and pressure conditions and quasi-in-situ conditions on amphibolites are approximately the same, whereas anisotropies under simulated in-situ conditions are partially higher.Furthermore, the anisotropies measured on the cm to m scale using the various methods outlined above shall be compared with large scale anisotropies of the km scale measured around KTB using Magneto Tellurics.     

Earthquakes in the Czech Republic and Surrounding Regions in 1995–1999

In the time span from January 1995 to December 1999 the Czech National Seismological Network (CNSN), consisting of ten permanent digital broadband stations, several local networks and two data centers, detected and recorded 9530 regional natural seismic events, 27 greater than magnitude 2. Most of these events were located by the Czech Seismological Service (CSS), and the most prominent of them were analyzed in detail. A large number of quarry blasts were recorded as well but were not included in the analysis. We provide basic information on the configuration of the CNSN and on the way of routine data processing employed by the CSS in this paper. The over-all regional seismicity monitored by the CNSN in 1995–1999 is briefly reviewed. The main results of observations and evaluation of the local (NW-Bohemia/Vogtland, South Bohemia, Sudeten) and induced (Kladno, Píbram, Upper Silesia, Lubin/Poland) seismic activity within this period are presented in a condensed form. Finally, a summary on macroseismic observations on the territory of the Czech Republic in 1995–1999 is also presented.     

Seismic anisotropy beneath Dronning Maud Land, Antarctica, revealed by shear wave splitting

Shear wave splitting analyses have been carried out using teleseismic data from broad-band seismograph stations deployed at temporary and permanent locations in Dronning Maud Land (DML), Antarctica. In most cases, the observed anisotropy can be related to major tectonic events that formed the present-day Antarctic continent. We rule out an anisotropic contribution from recent asthenospheric flow. At the Russian base Novolazarevskaya near the coast in central DML, waveform inversion suggests a two-layer model where the fast direction of the upper layer is oriented parallel to Archean fabrics in the lithosphere, whereas the anisotropy of the lower layer is interpreted to have been created during the Jurassic Gondwana break-up. Recordings at the South African base Sanae IV, however, show enigmatic results. For narrow backazimuthal segments, splitting parameters show strong variations together with a multitude of isotropic measurements, indicative of complex scattering that cannot be explained by simple one- or two-layer anisotropic models. In the interior of the continent, the data are consistent with single-layer anisotropy, but show significant spatial variations in splitting parameters. A set of temporary stations across the Heimefront shear zone in western DML yield splitting directions that we interpret as frozen anisotropy from Proterozoic assembly of the craton. An abrupt change in fast axis direction appears to mark a suture between the Grunehogna craton, a fragment of the Kalahari–Kaapvaal craton in southern Africa and the Mesoproterozoic Maudheim Province.     

Locally triggered seismicity in the central Swiss Alps following the large rainfall event of August 2005

In 2005 August, an unusual series of 47 earthquakes occurred over a 12-hr period in central Switzerland. The earthquakes occurred at the end of 3-d period of intensive rainfall, with over 300 mm of precipitation. The highest seismicity occurred as two distinct clusters in the region of Muotatal and Riemenstalden, Switzerland, a well-known Karst area that received a particularly large amount of rainfall. The large increase in seismicity, compared to the background, and the short time delay between the onset of the intense rainfall and the seismicity strongly suggest that earthquakes were triggered by rainfall. In our preferred model, an increase in fluid pressure at the surface due to a large amount of rain leads to a local increase in pore fluid pressure at depth. The increase in pore fluid pressure will reduce the shear strength of a porous medium by counteracting normal stress and, at the end, provoke failure. The series of triggered earthquakes in central Switzerland occurred in regions that have been seismically active in the past, showing similar hypocentre locations and magnitudes. This suggests that these earthquakes occurred on existing faults that were critically stressed. We modelled the intense rainfall as a step increase in fluid pressure at the surface that migrates to greater depths following the solution of the one-dimensional diffusion equation in a homogeneous half space. This allowed us to estimate the hydraulic diffusivity by plotting triggered seismicity in a time–depth plot. We found values of hydraulic diffusivity in the range from 0.01 to 0.5 m² s⁻¹ for our study area. These values are in good agreement with previous studies on earthquakes that were triggered by fluids, supporting the idea that the observed earthquake series was triggered by the large amount of rainfall.