断阶型潜山带地质模型的建立及储层预测--以CG20潜山为例

以 CG2 0潜山为例 ,从建立地质模型入手 ,包括地层模型、构造模型、储集模型、储盖组合模型、速度模型等 ,认识到各套地层分布和储层物性的差异均与地震响应密切相关 ,因此可以利用地震波的信息 ,预测潜山储层的发育及分布情况。在对 CG2 0潜山进行精细全三维构造解释的基础上 ,探讨性地应用了测井约束反演、吸收系数、相干分析及三维模式识别等技术 ,对潜山储层进行了预测 ,从而提高了潜山勘探的效益 ,并为类似断阶型潜山带的勘探提供了成功的经验 ,具有一定的指导意义。     

Hydrodynamic Forces on Smooth Inclined Cyh''''nders in Oscillatory Flow

-The hydrodynamic forces on a smooth inclined circular cylinder exposed to oscillating flow were experimentally investigated at Reynolds number (Re) in the range 40000-200000 and Keulegan-Capenter number (KC) in the interval from 5-40. In the test, Re number and KC number were varied systematically. The inertia force coefficient (Cu) and the drag force coefficient (CD) in Morison equation were determined from the measured loads and the water particle kinematics. In this analysis a modified form of Morison equation was used since it uses the normal velocity and acceleration. Thus, the applicability of the Cross Flow Principle was assumed. This principle, simply stated, is as follows: the force acting in the direction normal to the axis of a cylinder placed at some oblique angle with the direction of flow is expressed in terms of the normal component of flow only, and the axial component is disregarded. Both the total in-line force coefficient (CF) and transverse force (lift) coefficient (Cf) were analyzed     

Relationship between the seismicity and geologic structure of the Blanco Transform Fault Zone

Morphologic studies of an oceanic transform, the Blanco Transform Fault Zone (BTFZ), have shown it to consist of a series of extensional basins that offset the major strike-slip faults. The largest of the extensional basins, the Cascadia Depression, effectively divides the transform into a northwest segment, composed of several relatively short strike-slip faults, and a southeast segment dominated by fewer, longer faults. The regional seismicity distribution (m _b 4.0) and frequency-magnitude relationships (b-values) of the BTFZ show that the largest magnitude events are located on the southeast segment. Furthermore, estimates of the cumulative seismic moment release and seismic moment release rate along the southeast segment are significantly greater than that of the northwest segment. These observations suggest that slip along the southeast segment is accommodated by a greater number of large magnitude earthquakes. Comparison of the seismic moment rate, derived from empirical estimates, with the seismic moment rate determined from plate motion constraints suggests a difference in the seismic coupling strength between the segments. This difference in coupling may partially explain the disparity in earthquake size distribution. However, the results appear to confirm the relation between earthquake size and fault length, observed along continental strike-slip faults, for this oceanic transform.     

Tectonic Significance of the Taitung Canyon, Huatung Basin, East of Taiwan

Since the beginning of formation of Proto-Taiwan, the subducting Philippine (PH) Sea plate has moved continuously through time in the N307° direction with respect to Eurasia (EU), tearing the EU plate. The subducting EU plate includes a continental part in the north and an oceanic part in the south. The boundary B between these two domains corresponds to the eastern prolongation of the northeastern South China Sea ocean-continent transition zone. In the Huatung Basin (east of Taiwan), the Taitung Canyon is N065° oriented and is close and parallel to B. Seismic profiles show that the southern flank of the canyon corresponds to a fault with a normal component of a few tens of meters in the sediments and possible dextral shearing. Several crustal earthquakes of magnitude >%6 are located beneath the trend of the Taitung Canyon and focal mechanisms suggest that the motion is right-lateral. Thus, faulting within the sedimentary sequence beneath the Taitung Canyon is a consequence of underlying dextral strike-slip crustal motions. As the continental part of the EU slab located north of B has been recently detached, some subsequent dextral strike-slip motion might be expected within the EU slab, along the ocean-continent transition zone, which is a potential zone of weakness. We suggest that the dextral strike-slip motion along the ocean-continent boundary of the EU slab might trigger the observed dextral strike-slip motion within the overlying PH Sea crust and the associated faulting within the sediments of the Huatung Basin, beneath the Taitung Canyon. An erratum to this article is available at .     

等高线自动绘制中断层处理的新方法

提出了一种断层处理新方法——分块法与断层恢复法合成算法，这种方法兼有分块法与断层恢复法的优点同时又克服了其不足，较好地解决了含逆断层时煤层底板等高线自动绘制及任意边界的构网问题，使绘出的等值线图误差较小，更加符合实际。     

鲜水河断裂带炉霍段的水平运动及地震的重复性研究

本文讨论了鲜水河活动断裂带炉霍段的水平断错、古地震遗迹与地震重复间隔等问题。晚更新世以来断裂的平均滑动速率为13毫米/年。全新世中期以来大震的重复间隔时间小于600年     

Fault Characteristics in Longmen Mountain Thrust Belt,Western Sichuan Foreland Basin,China

Through field geological survey,the authors found that abundant thrust faults developed in the Longmen (龙门) Mountain thrust belt.These faults can be divided into thrust faults and strike-slip faults according to their formation mechanisms and characteristics.Furthermore,these faults can be graded into primary fault,secondary fault,third-level fault,and fourth-level fault according to their scale and role in the tectonic evolution of Longmen Mountain thrust belt.Each thrust fault is composed of several secondary faults,such as Qingchuan (青川)-Maowen (茂汶) fault zone is composed of Qiaozhuang (乔庄) fault,Qingxi (青溪) fault,Maowen fault,Ganyanggou (赶羊沟) fault,etc..The Longmen Mountain thrust belt experienced early Indosinian movement,Anxian (安县) movement,Yanshan (燕山)movement,and Himalayan movement,and the faults formed gradually from north to south.     

松辽盆地葡萄花油田北部鞍部地区成藏控制因素分析

在系统描述葡萄花油田北部鞍部地区构造特征和断裂体系的基础上,分析了烃源岩大量排烃期与构造形成时期的匹配关系、砂体分布、地层压力和断层封闭性对研究区成藏的控制作用。研究结果表明:烃源岩大量排烃期和构造形成时期良好匹配,地层压力低势区和在成藏时期断块边界断层侧向开启是成藏的有利条件,构造和砂体分布则是成藏的主要控制因素。研究区成藏条件较好,可作为有利扩边潜力区。     

多源遥感数据综合解译鄂尔多斯盆地杭锦旗地区地质构造

利用多源遥感数据假彩色合成、融合及纹理分析等增强处理方法提取研究区构造信息,进而对研究区进行综合解译;通过分析水系、色调、纹理、地貌及岩性等特征,判断出杭锦旗地区存在一小一大、内外相套的2个环形构造,发育的北西向、北东向2组共轭断层和一组北北西向断层,与环形构造相互构架,构成研究区特殊的构造体系。经分析预测,这些构造是受周边南北向构造应力共同挤压而形成。     

贝加尔裂谷系及邻区断裂现今活动变化及成因(英文)

已有的地质和地球物理方法无法对年、月、旬等现今时间尺度上的断层活动变化进行有效预测。运用基于地震活动定量指数运算程序的地理信息技术可以解决这个问题。这种方法被应用于贝加尔裂谷系(BRS)及邻区的研究当中。研究发现,断层活动变化发生在以几年为周期的时间尺度上,这无法用区域应力场的变化进行合理解释。沿着穿越贝加尔裂谷系的剖面编制了活动断层图以及地震活动定量指数曲线。提出的这种方法可以根据地震活动定量指数对活动断层进行仔细的分类,从而为解决地震中期预报相关问题开辟了重要途径。这种方法还被用来研究断层现今活动的时空变化和形成机制。研究发现,在实时尺度上断层活动具有高频发生的特征,这种现象可能是由于脆性岩石圈板内和块体内部运动产生的慢变形波的干扰导致的。利用变形波的通过速度可以对活动断层进行分组,各组具有不同的地质和地球物理特征参数,同时还可以对变形波波前的方向以及某一区域内主要断层在实时间隔内(地质上的瞬间)的活动情况进行预测。