Steel frames with bracing mechanism and hysteretic dampers

A new earthquake resistant structural system for multi‐storey frame structures, based on a dual function of its bracing components, is developed. This consists of a hysteretic damper device and a cross‐bracing mechanism with a kinetic closed circuit, working only in tension, so that cable members can be used for this purpose. Solutions are presented regarding the connections' design of three types of structural frame system, that are concerned throughout the study: braced moment free frame, braced moment resisting frame with moment free supports, and with moment resisting supports. The dynamic behaviour of the system is investigated on the basis of an SDOF model, and based on the response spectra method an approximate design approach of the controlled structures is shown. From the time history analysis of the structural systems for the El Centro earthquake the areas of appropriate stiffness relations of the frames to the hysteretic dampers and the cable braces are deduced, so that the energy dissipation of the system may be controlled by the damper‐cable bracing mechanism. Based on the results of these studies, a predesign approach is developed for the implementation of the control system in frame structures. Copyright © 2003 John Wiley & Sons, Ltd.     

Seismic response predictions of multi‐span steel bridges through pushover analysis

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.     

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.     

三角钢标对GPS测量影响的试验分析

GPS测量控制网为了与地面国家控制网进行联合的平差，必须与国家坐标系进行联测，GPS接收机有时也必须安置在有三角钢标的旧有控制点上。通过对此分析研究了三角钢标对GPS测量的影响，对设计和实施GPS测量的用户具有一定的参考价值。     

地下管线源数据处理方法的研究

为了保障顺利建设上海市地下管线数据库．需要对现存的地下管线的源数据进行一些技术处理，以满足数据入库的要求。本文主要个绍：笔者在从事地下管线源数据处理工作中，碰到的现存的上海市地下管线源数据对于建设上海市地下管线数据库所存在的一些问题：以及笔者利用Autodesk公司的AutoCAD二次开发工具开发的应用程序来处理这些问题的方法。     

锤击沉管碎石桩处理液化地基的工程实践

结合实际工程,对锤击沉管碎石桩加固处理液化地基的设计、施工控制及处理效果进行了系统论述,对碎石桩设计、施工中遇到的若干问题提出了建议。     

深层水泥土搅拌桩在基坑支护中的应用

通过介绍水泥与土之间的一系列物理-化学反应,阐述了深层搅拌法加固地基土的原理[1]。结合室内试验及工程实例,介绍了深层水泥土搅拌桩重力式挡墙技术在基坑支护中的应用,对于基坑设计及施工有一定实际意义。     

岩溶地区桩基的有限元分析

岩溶地区长桩存在着遇洞率的问题。为了研究岩溶地区桩的受力特点,采用有限元法模拟岩溶地区桩基的工作方式,分析了岩层厚度对桩的影响以及桩的受力状态,并研究了去桩的可能性。计算结果表明:岩层厚度对桩的影响较大,岩层的位置对桩的应力不产生影响,仅对桩的位移产生影响。     

高层建筑深基坑支护施工技术

深圳某高层建筑原基坑已作支护,但一直废弃作鱼塘用。新的基坑支护采用土钉墙和树根桩施工,支护完成后监测结果较好,没有发生明显的位移和沉降。     

承台外区土阻力群桩效应及效应系数的有限元分析

利用三维弹塑性有限元方法,对复合桩基承台外区土阻力群桩效应及其效应系数进行了研究,讨论了土类、桩长、桩距、桩数等对承台外区土阻力群桩效应及其群桩效应系数的影响,结果表明(1)承台外区土阻力随承台宽与桩长之比 (B/L)的增大而增大,但增幅不大;随桩距S增大而增大;受桩数n的影响不大。(2)承台外区群桩效应系数随B/L增大几乎无变化;随S增大而增大;不随n变化而变化。(3)承台外区群桩效应系数与土类有关。