大型钢结构变形测试方法的研究与实践

介绍了精密全站仪进行结构测试的原理和方法,通过对某大型游泳跳水馆钢结构网架在张拉和加载试验中的变形测量实践,证明其具有作业简便、能够全面反映结构变形情况之优点,且精度较高,成果可靠。     

南京长江三桥钢索塔拼装测量控制网的建立

南京长江三桥是我国首座主塔采用钢结构形式的特大型斜拉桥。根据钢索塔拼装测量的精度要求,介绍了该桥首级控制网的概况,对钢索塔架设专用控制网的网形选择、方案设计、观测方法和数据处理进行了探讨。实践证明,所采取的专用控制网布设方法和测量方案是合理的,对今后类似工程具有借鉴意义。     

海盐粒子沉积下碳钢的大气腐蚀初期行为

利用体视显微镜和电化学极化技术原位考察了碳钢上NaCl盐粒的吸潮及其液滴的扩展行为。实验结果表明,NaCl液滴的吸潮水解过程主要受环境相对湿度的影响。相对湿度越高,水解越容易。在极化状态下,NaCl液滴的扩展随极化电流的增加而线性加速。NaCl液滴的扩展与碳钢大气腐蚀的电化学过程相互影响。一方面,NaCl液滴扩展的动力来自于大气腐蚀过程所形成的腐蚀电流,另一方面,NaCl液滴的扩展加大了大气腐蚀过程的阴极面积。进而加速了碳钢的腐蚀过程。     

SEISMIC IMPACT LOADING IN INELASTIC TENSION-ONLY CONCENTRICALLY BRACED STEEL FRAMES: MYTH OR REALITY?

Tension-Only Concentrically Braced Frames (TOCBF) exhibit deteriorating pinched hysteretic behaviour during strong earthquakes. Slender braces transit between an elastic buckling state, a restraightening state, in which they carry almost no load, an elastic tensile loading state as they are suddenly taut and, finally, a tensile yielding state. It has long been suspected that the sudden increase in tensile forces in the braces of TOCBSF creates detrimental impact loading on the connections and other structural elements. No experimental evidence, however, has been provided so far to confirm, or to quantify, this impact phenomenon. This paper addresses this issue through shake table tests of half scale, two-storey, TOCBF models. By normalizing the hysteresis loops of braces obtained from shake table tests to the yield strength of steel obtained from quasi-static tests, the increase in tensile forces in the braces was obtained. Results of dynamic tensile tests on steel coupons under similar strain rates as observed during the shake table tests showed that this increase in tensile forces is not the result of impact, but is rather caused by a yield strength increase of the steel under high strain rate. A procedure is proposed to estimate and account for this increase in tensile forces in the braces at the design stage.     

大型桥梁钢沉井下沉过程局部冲刷研究

钢沉井下沉过程中局部冲刷的研究是同类桥墩设计和施工十分关心的重要课题,它对保证钢沉井安全有效施工、桥梁设计中施工期桥墩最大冲深、失稳和安全计算有重要参考价值。通过室内试验研究了钢沉井下沉过程中的局部冲刷机理和冲刷形态,探讨了桥墩下部钢沉井基础施工的相对高程对局部冲刷的变化规律,并将试验研究所获得的局部冲刷规律和影响因素,采用墩型系数方法引入局部冲刷计算中,给出了计算公式。研究成果补充了国家行业规范内容,对同类工程的设计、施工具有借鉴和指导意义。     

国外深水钢悬链线立管研究发展现状

介绍国外在新型深水立管系统--钢悬链线立管关键技术方面的研究发展现状,论述浮体一、二阶运动对钢悬链线立管疲劳寿命的影响、浮体升沉运动对钢悬链线立管触地点疲劳寿命的影响;钢悬链线立管与海底相互作用机制的实验研究及结果;钢悬链线立管涡致振动与疲劳的研究现状.并简要论述钢悬链线立管触地点问题的研究结论.     

确定海洋平台钢裂纹扩展曲线的快速方法

提出了一种确定海洋平台钢裂纹扩展曲线的快速方法。该方法可以综合利用以往的经验数据和当前试验数据确定表面疲劳裂纹扩展速率曲线。与传统的只能利用当前试验数据确定表面疲劳裂纹扩展速率曲线相比。其可利用信息量大幅度增加,所以在精度相同的情况下,可以节省大量试件;而且在试样数一定的情况下。又可大大提高预测精度。文中还给出了海洋平台钢试验对比实例。     

Place‐based action in Wollongong: the role of union–community alliances in constructing labour geographies of steel

Place‐based action (PBA) features prominently in labour geographies, particularly in restructuring politics, and is consistently employed as an enduring union tactic, yet it remains relatively undervalued in steel restructuring accounts, with common approaches emphasising the class instability and limitations of such action. In contrast, and to redress the apparent imbalance, this paper argues the merit of recognising PBA as a distinct movement‐based politic with specific forms of representation and empowerment. Such an approach should lead to greater recognition and appreciation of the impact that PBA has had historically. To illustrate this, a case study is presented of how local groups used place‐based action in Wollongong to shape steel restructuring politics and industry policy during the 1980s. Although powerful, the influence of PBA diminished at the policy writing stage. Rather than devaluing all benefits from PBA due to such limitations, it is suggested that the constraints on PBA at this point suggests the need for other forms of intervention. It is concluded that the approach suggested here highlights when other tactics are required, strengthening real‐world tactical analysis.     

Study on deepwater conductor jet excavation mechanism in cohesive soil

Conductor casing jetting technique has been increasingly applied in deepwater drilling. The insight into the jetting excavation mechanisms is critical in guiding a successful conductor casing jetting operation. The real- time continuous jet excavation process is simulated with the volume of fluid (VOF) multiphase method of CFD (Computational Fluid Dynamics) ANSYS Fluent calculation software in the current study. The cohesive soil is modelled by using a kind of viscous fluid with Herschel-Bulkley model. In addition, a laboratory half round nozzle jet excavation test is designed for verification by comparison of the observed jet excavation profile with the numerical results. The sensitivity parameters affecting the conductor jetting excavation mechanism in cohesive soil are thus investigated. It is found that the application of Herschel-Bulkley (HB) model for cohesive soil and the VOF method of Fluent can provide a good simulation of jet excavation process. The maximum excavation depth can be determined by the undrained ultimate bearing capacity of the circular foundation with a bearing capacity factor of 6.7. The nozzle position, jet velocity and soil strength have significantly influence on the depth and width of the jet excavation profile in conductor oblique jet.     

下翼缘摩擦式自定心钢框架梁柱节点抗震性能的数值模拟

介绍了一种新型的铜框架梁柱节点形式,其中预应力钢绞线提供了结构在地震作用下的复位功能（自定心）,设置在梁端下翼缘的摩擦件则为结构提供了耗能能力;介绍了下翼缘摩擦式自定心钢框架粱柱节点的构造和工作原理,以节点的低用反复加载试验结果为依据,利用面向对象的开放式计算程序OpenSees建立了节点的数值模型,并侧重于模拟节点在地震作用下的张开/闭合、自定心、摩擦耗能以及螺栓受剪等特性。由计算结果与试验结果对比可知,所建立的数值模型对节点的抗震性能具有良好的模拟效果。