旋喷固结体的物理力学性状研究

通过单轴抗压试验、剪切试验、变形试验及渗透性试验等方法，对旋喷固结体的物理力学性状和渗透性进行了研究。结果表明：旋喷固结体具有良好的物理力学性质和较低的渗透性，可完全改变天然土的性质。     

一种新型自动开槽机及其控制

针对棒、管料开槽的问题，提出了一种新型全自动开槽机。介绍了该开槽机的结构和工作原理，建立全自动开槽机相适应的液压系统，搭建了开槽机继电器——控制器控制电路，实现了该设备的全自动过程控制。     

A new method of testing pile using dynamic P-S-curve made by amplitude of wave train

A new method of detecting the vertical bearing capacity for single-pile with high strain is discussed in this paper. A heavy hammer or a small type of rocket is used to strike the pile top and the detectors are used to record vibration graphs. An expression of higher degree of strain (deformation force) is introduced. It is testified theoretically that the displacement, velocity and acceleration cannot be obtained by simple integral acceleration and differential velocity when long displacement and high strain exist, namely when the pile phase generates a whole slip relative to the soil body. That is to say that there are non-linear relations between them. It is educed accordingly that the force P and displacement S are calculated from the amplitude of wave train and (dynamic) P-S curve is drew so as to determine the yield points. Further, a method of determining the vertical bearing capacity for single-pile is discussed. A static load test is utilized to check the result of dynamic test and determine the correlative constants of dynamic-static P(Q)-S curve. Foundation item: Key projects of the tenth Five-year Plan of Yunnan Province (documented Yunnan district [2002]54-02-02) and Geophysical Society of Yunnan Province.     

A new method for testing pile by sin- gle-impact energy and P-S curve

Introduction Through many year's practices by vast numbers of scientific and technological workers andefforts from all aspects, the dynamic testing method of high-low strain has formally entered intothe technical code of foundation pile test of construction at last (The Industry Standards of thePeople's Republic of China, 2003). The striking mode of the dynamic testing method of high strainis stipulated as hammer in the code, the striking of rocket can also be used. The latter is widely…     

物理实验中的不确定度评定

阐述了不确定度的定义、来源、分类及用不确定度评定测量结果的一些表示方法。分析了误差和不确定度的区别。最终给出了测量不确定度的评定。     

南泥湾油田工业油流标准参数确定及算法

针对南泥湾油田特点。确定适合本区地质及油藏工程特点的工业油流标准，提高该类油田储量的计算精度。应用数值模拟、类比等方法。结果显示．南泥湾这类必须经过压裂改造的特低渗油藏．单井产量仍然按照双曲线递减规律；工业油流标准的确定，需要准确把握单井平均总投资、原油利润、收回单井总投资的单井产量等参数，在此基础上确定的工业油流标准更能满足生产需要，对储量计算、滚动开发建产、管理者决策具有十分重要的意义。     

裂变径迹长度测量标准化研究——锆石蚀刻标准探讨

通过不同时间蚀刻的锆石径迹长度测量,确定海南迅速冷却火山型锆石的水平封闭径迹(HCT)平均长度L＝10.93 μm,标准偏差为0.93 μm,可作为锆石长度测量的参照标准.对锆石的蚀刻标准进行了探讨,确立垂直C轴的表面径迹宽度Dpar为(1.0±0.5)μm的蚀刻标准,要求Dpar>1 μm和Dpar<1 μm的颗粒数应大致相当,以及封闭径迹宽度DHCT<1.0 μm的测量标准.     

砂土液化判别方法可靠性评价

在进行液化评价简化法与规范液化判别方法对比基础上，利用液化概率的对数回归方程，讨论了规范液化判别方法的可靠性。研究结果表明，我国规范液化判别方法其液化概率变动较大，对于烈度 Ⅶ 度，规范法的液化概率在0.17～0.42间，小于简化法概率0.36～0.43，偏保守。对于烈度 Ⅷ 度和 Ⅸ 度近地表场地，规范法的液化概率高达0.65～0.70，远远高于简化法的液化概率，安全裕度不够。对于含粘粒土质液化评价，规范方法的液化概率总体上都较简化法高，特别是烈度Ⅷ度高粘粒含量其液化概率为0.9。     

用于新生代定年的Ar-Ar法标准样品候选样品初测结果

Ar Ar法定年的特点是必须要有一套年龄从小到大的标准样。迄今用于新生代定年的国内标准样极少。为满足新生代矿物Ar Ar法定年的需要,初选了一个标准样候选者BT 1透长石。样品总重366g,粒级6080目,纯度100%,缩分为100瓶,每瓶3 66g。Ar Ar阶段加热法初测结果为:全部12个阶段给出的总气体年龄为30 8±0 9Ma,412阶段视年龄十分接近,年龄谱平坦,对应的39Ar析出量达96%,坪年龄为29 6±0 4Ma,等时年龄为29 6±0 6Ma,MSWD=1 01。40Ar/36Ar初始值为293 6±3 9,与尼尔值295 5相当。重复测定结果为:全部气体年龄为31 0±0 9Ma(全部9个阶段),坪年龄为29 5±0 4Ma,等时年龄为29 4±0 6Ma,MSWD=1 94,40Ar/36Ar初始值为282 2±6 3。这些结果表明,BT 1透长石不含过剩氩,作为新生代定年的Ar Ar法标准样品候选者是较为理想的。     

土参数对桩基水平响应影响的研究

桩基的水平响应由桩土间的相互作用决定,通过采用p-y曲线来表示桩土间的非线性相互作用。通过算例,讨论分析了粘性土参数的变化对p-y曲线中土体的极限强度和刚度、桩基水平位移和弯矩分布及最大弯矩和水平荷载关系的影响。