纤维素接枝丙烯酰胺/高岭土高吸水性复合材料研究

在高岭土的存在下，以N，N－亚甲基双丙烯酰胺作交联剂，以硝酸铈铵为引发剂微晶纤维素与丙烯酰胺进行接枝共聚反应，合成接枝纤维素／高岭土高吸水性复合材料。研究了纤维素与单体的配比、高岭土添加量、交联剂用量、引发剂用量及反应温度对吸水率的影响。用红外光谱表征复合材料的结构，用电子显微镜观察复合材料的表面与界面。结果表明，高岭土在接枝聚合物中能较好分散，复合材料吸水率达1166，对生理盐水溶液的吸水率达86。     

Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.     

Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1

A new geochemical reference material, coral Porites sp. JCp-1 has been prepared by the Geological Survey of Japan (GSJ). Provisional values for twenty one major, minor and trace elements are presented. The homogeneity tests showed that all elements studied are considered to be homogeneously distributed.     

河流水质风险评价的灰色-随机风险率方法

提出了量化影响河流水质的随机不确定性与灰色不确定性的水质超标灰色－随机风险率概念，建立了水质超标灰色－随机风险率评价模型。在水质单项参数评价模型中，将河流污染物浓度变量的分布处理成灰色概率分布，将污染物浓度超过水质类别标准值的风险率处理成灰色概率，即水质超标灰色－随机风险率。在水质综合评价模型中，河流水环境系统被考虑为担任某一使用可能的可靠性系统，而任意一种水质参数超标意味着河流水体使用功能不能得到应有的保证，也即表明水体综合评价超标，最后借鉴系统可靠性分析的理论和方法计算水质综合超标率。该方法应用于黄河花园口断面重金属污染风险评价。     

城市基准地价评估的容积率内涵及其修正系数的确定--以石家庄市为例

基淮地价评估是当前城市地价评估的主要形式。容积率既反映了土地的利用状况，同时也是影响地价的主要因素之一。该文阐述了容积率内涵，分析容积率与地价、环境的关系，探讨合理容积率的确定，以石家庄市为例，探索容积率修正系数确定的正确途径，避免在容积率概念、修正系数等问题上产生混淆。     

某地平板玻璃原料用石英砂的提纯研究

某地石英矿砂通过磁选分离法、稀酸浸泡法处理后，矿砂不同程度地降低了铁、铝、钙镁的含量；采用磁选分离 稀酸浸泡法联合处理后，使该地石英砂的化学成分达到了优质的生产平板玻璃用硅质原料的国家标准。     

压电双晶片双向大幅振动的探讨

通过压电陶瓷的逆压电效应对压电陶瓷双晶片在自动生产送料线上的应用研究，得出在二元系Ph(Ni1／3Nb2／3)O3-PhTiO3-PhZrO3的基础上作调整制作的压电双晶片。经运用在振动料斗上，作调频调幅控制。达到了压电双晶片振子结构，振子谐振频率为300Hz，当外加电压达300V时，振子偏转位移量大于1．7mm，故可作为一种理想的振动源。     

夏塞地区银、锡多金属矿成矿规律新认识

夏塞地区是西南三江(金沙江、澜仓江、怒江)地区东缘的一个重要成矿带，带内银、锡矿产责源十分丰富。本文认为其成矿物质来源于花岗岩体和地层，构造和岩体是区内的主要控矿因素，地壳演化与成矿作用关系十分密切，矿床类型为分布于岩体内接触带的矽卡岩型矿床和分布于岩体外接触带的热液型矿床。     

对综合测井曲线解释的几点体会

本文阐述了在地质找矿中从地质角度对综合测井曲线解释的重要性；指出了测井曲线的一般特点和特殊优点；尤其对致密钙质岩石在测井曲线上的表现形式及其厚度确定做了深入研究；分析了测井曲线解释存在的问题；最后提出了几点建议。     

兰坪白秧坪铜银多金属矿床成矿物质来源的铅和硫同位素示踪

白秧坪铜银多金属矿床主要产于白垩系下统景星组石英砂岩、粉砂岩中，矿石铅同位素组成特征与景星组砂岩的铅同位素组成比较接近，表明壳源物质参与了成矿作用。作ZartMan图解和△γ—△β图解表明，矿石铅属于壳幔混合来源。矿石铅μ值介于9．43—9．65之间，Th/U比值介于3．72—3．87之间，表明矿石铅为壳幔混合铅。该矿床硫同位素组成表明，硫来源于深部地幔硫遭受地壳硫的混入。该矿床的成矿作用发生于开放体系之中，成矿物质来源为深部幔源物质混合了壳源物质。