基于GPS速度场的云南地壳应力积累特征分析

利用2009~2015年的GPS水平运动速度场数据,解算云南地区的地壳应变场,在红河断裂与曲江断裂选取两个GPS剖面,计算并分析两个断裂的应变积累特征。结果显示：1）红河、曲江、小江等多个主要断裂应变场存在张、压交替的时空演化特征,近期曲江断裂南段表现为东西向拉张,红河断裂北段东西向拉张量值较大,约12.0×10-8/a,云南南部主要表现为NNE向的压性变化;2）从GPS剖面看,红河、曲江断裂在两个方向上均显示右旋走滑与拉张的变化特征,从量值上看,红河断裂北段运动速率较大,约8.90 mm/a。     

大别山及其周边现今垂直形变研究

基于1980年、2005年和2015年3期区域精密水准网观测资料,利用线性动态平差模型计算获取大别山地区水准网长期垂直运动速度场图像。研究发现,淮河平原地表下沉较为严重,大别山呈现弱隆升趋势运动,长江谷地边缘地区较大别山区呈现明显的隆升运动。跨郯庐断裂带水准剖面结果显示,垂直运动与地形呈负相关和弱相关。     

GPS约束下陇西地区断裂带现今滑动速率的非连续接触模拟研究

以中国地壳运动观测网络1999、2001、2004和2007年4期GPS观测数据为边界条件,使用非连续接触有限元技术构建陇西块体二维有限元模型,在摩擦系数不确定性分析基础上,计算区内主要断裂带滑动速率。结果表明,现今地壳形变运动状态下陇西块体的北东向运动在海原断裂附近受到鄂尔多斯块体、阿拉善块体阻碍,陇西块体周缘的海原断裂带、老虎山断裂、西秦岭北缘断裂呈现左旋走滑特征,滑动速率为3.5 mm/a、2.2 mm/a和1.9 mm/a,说明在青藏高原推挤作用下以上关键部位正在进行快速的构造应变积累。     

断层周围的弹塑性区及其地质意义

采用弹塑性有限单元方法 ,通过模拟符合实际状况的逐步加载过程所引起应力场和塑性形变区的研究 ,得出如下结果 :①在塑性或韧性剪切形变情况下 ,断裂或形变带的共轭剪切角往往大于 4 5° ;②在双向挤压应力条件下 ,先存断裂的前缘部位没有拉伸应力存在 ,但可能有伸展形变发生 ;③与最大主压应力夹角为 3 0°～ 90°的断层前缘是偏应力的优势方位 ,容易发生塑性剪切形变 ,特别是夹角为 60°左右的断层是最易发生新的构造活动的断层 ;④多数断层两侧一定范围内以及断层内部是相对的低应力区。这些应力的低值区 ,非常有利于矿液和油气的运移、聚集和成藏。     

东濮凹陷岩性油气藏勘探方法初探

岩性油气藏已成为渤海湾盆地内各凹陷重要的勘探对象。笔者根据对东濮凹陷形成演化、沉积特征的研究，结合油田下洼勘探的需要，提出了断层分析法进行岩性油气藏勘探，总结出3种模式，经在多个地区应用取得了较好的效果。该方法立足于构造对沉积的控制作用和地震资料对断层的识别能力高于对砂体的分辨能力，操作简便、实用，对断陷盆地的深化勘探具有指导意义。     

渤海湾盆地垦利断裂带构造与油气关系研究

本文在分析垦利断裂带断裂构造特征的基础上,探讨了该地区断裂构造对油气运聚的控制作用。研究表明,垦利断裂带油气沿断层运聚主要有2种模式：①沿断层垂向运移和聚集;②横穿断层的运移和聚集。油气大规模地横穿断层的运移和聚集主要发生在垦利和垦东6断层的深部和浅部层段。根据在垦利断裂带已发现的油田(藏)总结出4种成藏模式,即同层成藏、潜山成藏、跨断层成藏和沿断层成藏,认为该地区的油气分布受构造因素控制,并对该地区隐蔽圈闭(油气藏)的勘探前景作了分析。     

Origin of transverse folds in an extensional growth-fault setting: Evidence from an extensive seismic volume in the western Gulf of Mexico

Growth faults in gravity-driven extensional provinces are dominated by coast-parallel trends, but coast-perpendicular (transverse) trends are far less documented. The Clemente–Tomas fault in the inner Texas shelf has corrugations that are transverse to the fault and that plunge downdip. A large (8500 km²), high-quality, 3D seismic survey allows a uniquely encompassing perspective into hanging-wall deformation above this corrugated fault surface. Synextensional strata in the hanging wall are folded into alternating transverse ridges and synclines, typically spaced 10 km apart. Forward modelling in dip profiles of an extensional fault having three ramps produces ramp basin-rollover pairs that compare with the seismically revealed ridges and synclines. As they translated down the undulose fault plane, ramp basins and rollovers were juxtaposed along strike, forming the hanging-wall ridges and synclines observed offshore Texas. Fault-surface corrugations correlate broadly with footwall structure. We infer that corrugations on the Clemente–Tomas fault formed by evacuation of an allochthonous salt canopy emplaced in the late Eocene to early Oligocene. Early salt evacuation (Oligocene) created an undulose topography that influenced incipient Clemente-Tomas fault segments as they merged to form an inherently undulose fault. Late salt evacuation (early Miocene) further deformed this fault surface.     

Mechanisms of collapse of the cretaceous helvetiafjellet formation at Kvalvågen,eastern Spitsbergen

Coastal cliffs at Kvalvågen, eastern Spitsbergen, expose palaeolandslide blocks and related slope failure features that record local collapse of an otherwise undisturbed succession of paralic sediments. The collapse occurred along a shallow sloping shelf at the edge of an epicontinental sea in the Early Cretaceous. The event was coincident with a rise in relative sea level along a coast that had just previously experienced a major paralic regression across a muddy marine environment. The low relief environment in which the slope failure structures formed, as well as the timing of the collapse raise questions regarding the cause of the topographic instability and the possible influence of sea level changes or tectonic activity. These outcrops have been previously interpreted as the collapse of a deltaic system triggered by local seismic activity or collapse of a shelf break in the headwall regions of submarine canyons. This paper presents new structural and stratigraphic data that refine and adjust the previous interpretations through the evaluation of a variety of possible mechanisms for collapse based on the new data. Our data suggest that active delta deposition was not occurring at Kvalvågen at the time of collapse and that the collapse was likely due to allogenic forcing. Despite the possible influence of pore fluids and rheological controls on the collapse, we find that the geometry and kinematics of landslide slip planes, synsedimentary folds, and other slope failure related features require over-steepened topography and that these are most consistent with westward-directed collapse off of a north striking escarpment with elevated topography on the east side. Fault exposures, a large contrast in palaeo-elevation, and liquifaction features support previous interpretations of a tectonic cause for the collapse and suggest that this topographic feature may have been a fault or fold scarp. This study demonstrates the importance of combining stratigraphic and sedimentological data with structural data and kinematic analysis in the interpretation of sedimentary processes.     

南堡凹陷4号构造带蛤坨断层特征与油气成藏关系

南堡凹陷4号构造带断裂发育,既发育沟通烃源岩的深断裂,也发育沟通浅层圈闭的次级断裂。综合利用地震、测井、岩性等资料分析断层的空间展布,计算蛤坨断层的生长指数和断层泥比率（SGR）,分析断层的活动性、封堵性,评价其输导性能,并结合其与烃源岩生排烃期的匹配关系研究断裂与油气运移、聚集的关系及控制规律。在典型油气藏剖面解剖的基础上,建立了4号构造带油气运聚成藏模式。     

江南造山带中段地壳结构特征——来自武宁—吉安深反射地震随机介质相关长度分析的认识

江南造山带位于扬子和华夏地块中间,受华南陆块及其周缘多期次的碰撞、裂解及再造过程影响,经历了复杂的构造运动和变形,于中生代期间受区域构造-岩浆事件影响,发生成矿“大爆发”,是研究陆内深部过程、成矿作用的关键地区。受沉积覆盖、出露较少等因素影响,江南造山带中段地壳结构、深部过程及其边界范围等还存在争议。为进一步提高对江南造山带中段中生代深部构造背景、动力学过程及成矿作用的认识,本文利用武宁—吉安深反射地震数据,进行随机介质参数的计算,获得了相关长度剖面。结果发现江南造山带中段地壳厚度沿剖面由北向南逐渐减薄,结合前人研究推测研究区受控于燕山期晚期伸展构造体制,在伸展构造背景下,导致地壳减薄,诱发幔源物质上涌,受地幔上涌影响由南往北逐渐减弱。同时揭示了宜丰—景德镇断裂深大断裂极性,进一步证明了萍乡—广丰断裂为江南造山带中段与华夏地块的边界。最后综合分析了中生代区域构造对成矿的影响,认为在伸展构造背景下,幔源物质沿断裂上涌控制了该区金、钨等矿床的形成。