双排抗滑桩上滑坡推力近似解析方法

双排抗滑桩是加固大型滑坡的常用工程措施之一,在实际工程设计计算中的关键环节在于简单且合理地确定作用于前后排桩上的滑坡推力。将抗滑桩受荷段前侧坡体视为水平向的温克勒（Winkler）地基,基于弹性地基梁模型,并充分考虑桩体受荷段与锚固段的变形连续性,通过迭代算法确定出后排抗滑桩受荷段前侧坡体抗力,进而可对排间坡体采用传递系数法计算出前排桩桩后滑坡推力,给出了相关的理论计算公式。通过室内模型试验验证了所提方法的合理性,并针对一大型基覆式滑坡实例,具体计算出了前后排桩上的设计滑坡推力荷载。所提计算方法可为实际工程的简化设计提供参考。     

再论悬臂式抗滑桩合理桩间距的计算方法

为了进一步合理确定悬臂式抗滑桩桩间距,在对以往关于开挖边坡抗滑桩桩间距分析模型缺陷讨论的基础上,提出在抗滑桩桩后局部所形成的拱脚处,两侧土拱在此交汇形成的是倒梯形受压区。在计算确定悬臂式抗滑桩桩间距时,除满足桩间静力平衡条件、土拱跨中及拱脚处的强度条件等基本控制条件外,还需满足桩计算宽度条件、桩土变形协调条件等附加条件,得到了确定桩间净距的方程组,通过迭代试算可以求解。依托一工程实例,定量地说明了在其他因素不变的情况下,桩间净距随桩后土体黏聚力或内摩擦角的增大而非线性增大,且桩间净距受黏聚力的影响更为敏感,同时桩间净距随着桩后坡体推力的增大而呈非线性减小。所提出的方法除可用于黏性土外,还可用于无黏性土。     

冻融作用下PPF稳定土力学性能研究

为了研究冻融作用下外加材料稳定土的力学性能,以一种国产土壤固化剂（TG固化剂）加固低剂量水泥石灰稳定土为研究对象,通过冻融前后的无侧限抗压强度试验、劈裂强度试验和抗压回弹模量试验,研究不同压实度、聚丙烯纤维（PPF）掺量稳定土的力学性能。结果表明：稳定土的抗压强度、劈裂强度及回弹模量均随冻融次数的增加而降低,经历6次冻融循环后,强度、模量损失率基本稳定。冻融前后稳定土的抗压强度、劈裂强度、抗压回弹模量以及强度、模量的残留百分比均随着压实度和PPF掺量的提高而增大。结合工程实际情况,选取压实度为95%,0.2% PPF综合稳定土进行冻融试验,得到抗压强度残留比（BDR）达到59.32%,质量变化率仅为6.28%,研究表明,PPF综合稳定土具有优良的冻稳定性,可用作路面基层材料。     

土质边坡中部与顶部抗滑桩动力响应和边坡变形比较

地震作用及其诱发的变形或滑坡常会使抗滑桩受力发生显著变化,为此,研究了地震作用下不同加固位置的抗滑桩的动力响应和边坡变形情况.试验分析表明:中桩位边坡坡顶变形比高桩位边坡坡顶变形大,但中桩位边坡坡脚堆积变形比高桩位边坡坡脚变形较小;在同样条件下中桩位抗滑桩的静力、动力弯矩小于高桩位抗滑桩相应位置的弯矩;地震结束后由于坡体震动残余变形较大,抗滑桩最终承担着震后残余弯矩,但高桩位抗滑桩的承载能力在震后仍然发挥较大.研究结果表明:高桩位加固位置可以有效发挥抗滑桩的抗弯承载能力,但中桩位可以有效抑制坡底坡脚变形.     

淋水碎裂顶板煤巷锚固试验研究与实践

煤巷顶板锚固区域富水岩层支护中出现的沿锚杆（索）钻孔持续渗、淋、涌水难题是工程中亟待解决的问题。采用一种新型锚杆（索）防水锚固剂进行了相关防水性配比试验研究;为了获得煤系碎裂顶板持续渗水作用下粉砂岩强度变化规律,在现场与实验室分别进行渗水试验。结果表明：NS-1不饱和聚酯树脂及添加2%的XS-1高分子速溶胶粉是防水型锚固剂关键点;在静水浸泡作用下,粉砂岩抗压强度呈现先缓慢增大而后快速衰减的变化规律;在动水渗流、循环风干作用下粉砂岩在36～42 h内裂隙开度增加,强度持续弱化。研究了粉砂岩顶板水与支护体耦合作用关系,在团柏煤矿101101巷道进行新型锚固剂锚杆（索）锚固试验,防水型锚固剂在钻孔渗流量为140 mL/s时,仍能达到208 kN的锚固效果;试验结果表明,对锚杆、锚索施加高预应力和采用防水锚固剂可保证顶板淋水碎裂煤巷的稳定。     

Genetic algorithm for fitting a mixed Bingham distribution to 3D orientations: a tool for the statistical and paleostress analyses of fracture orientations

The clustering of fracture orientations is important for tectonic studies and for geotechnical engineering. In this study, a real‐coded genetic algorithm was adopted to fitting a mixed Bingham distribution to orientation data by maximizing the log‐likelihood function of the distribution. The maximization is a difficult problem, because the function has multimodality and singularity. It was found that the algorithm was effective for this problem. Given the orientations of dilational fractures, the present method determines not only the stress axes and stress ratio of each of the fracture groups but also the maximum non‐dimensionalized fluid pressure at the time of their formation. In addition, the software calculates the 95 % error ellipses of the concentration axes. The present method found that the orientations of ore veins of the Akenobe Mine, SW Japan, should be partitioned into three clusters. It is shown that two of the groups had distinctive Zn and Sn contents, and that the ore fluids had overpressures only slightly greater than the minimum principal stress at the time of the deposition of Zn‐ and Sn‐rich veins.     

流-固耦合模型试验用的新型相似材料研制及应用

为研究隧道突水、突泥过程中断层及围岩各物理场变化规律,根据地质力学模型试验相似原理,通过大量多组别配比试验,研制出适用于流-固耦合模型试验的新型断层及围岩相似材料。其中,断层相似材料以砂为粗骨料,滑石粉为细骨料,石膏、膨润土作为胶结剂,液态石蜡作为调节剂;围岩相似材料以砂为粗骨料,重晶石粉、滑石粉为细骨料,白水泥及乳胶作为胶结剂。通过大量室内试验,对比分析原岩及相似材料变形特征及强度破坏特性,重点对单轴抗压强度、渗透系数、重度、泊松比、弹性模量等重要变形及水理特性参量进行调控,系统研究不同配比对材料参数的影响规律。试验结果表明：该材料力学参数变化范围广、性能稳定、操作工艺简单,可用来模拟不同渗透系数的低、中等强度岩体材料。将该相似材料应用于吉莲高速公路永莲隧道断层突水、突泥三维地质力学模型试验中,力学性能及水理特性均达到试验要求,能够有效地模拟突水、突泥的发展演变过程,真实反映断层灾变过程中各物理场响应规律。     

保水剂与活性炭改良白云岩石漠化坡地土壤促进植物生长的盆栽试验研究

文章分析了白云岩坡地岩土组构特点,针对白云岩坡地土壤易漏水、漏肥的原因,提出利用保水剂的保水功能和活性炭的吸附与缓释功能对白云岩坡地土壤进行改良的思路和方法,并开展相关盆栽试验,研究保水剂保水、活性炭保肥对促进植物生长的作用,取得了良好效果。研究结果表明:（1）减少水分渗漏,利用保水剂的吸水性,是促进白云岩坡地植被生物量提高的重要措施。加入保水剂含量比例为0.5%时,总生物量比不加保水剂处理增加51.2%。加入保水剂含量比例为1%时,总生物量比不加保水剂处理增加111.2%;（2）同等添加0.5%保水剂情况下,随着活性炭加入比例的提高,生物量增长显著。加入3%的活性炭处理相比未加入活性炭处理,总生物量提高31.2%;加入5%的活性炭处理相比未加入活性炭处理总生物量提高78.6%。初步论证了利用活性炭的吸附与缓释功能改良白云岩糖砂层土壤,缓解养分渗漏的可行性。（3）白云岩土壤改良前后,植被生长差异显著。加入0.5%保水剂和5%的活性炭的处理比无添加的对比实验,总生物量提高101.2%,其中地上部分与地下部分分别增长90.9%和205.8%。此研究为白云岩石漠化坡地提高土地生产力, 缓解人地矛盾, 促进白云岩石漠化坡地植被恢复及土地的开发利用探索了新途径,是一种待之有效的土壤改良方法。      

A Review of: “Applications of Spatial Data Structures: Computer Graphics,Image Processing,and GIS”. By H. SAMET. (Addison-Wesley Publishing Company,Inc, 1989.) [Pp. xv + 507; figures,tables, appendix,references, name and credit index,subject index.] Price US $49.95. ISBN 020150300 X (hardback).

The introduction of automated generalisation procedures in map production systems requires that generalisation systems are capable of processing large amounts of map data in acceptable time and that cartographic quality is similar to traditional map products. With respect to these requirements, we examine two complementary approaches that should improve generalisation systems currently in use by national topographic mapping agencies. Our focus is particularly on self‐evaluating systems, taking as an example those systems that build on the multi‐agent paradigm. The first approach aims to improve the cartographic quality by utilising cartographic expert knowledge relating to spatial context. More specifically, we introduce expert rules for the selection of generalisation operations based on a classification of buildings into five urban structure types, including inner city, urban, suburban, rural, and industrial and commercial areas. The second approach aims to utilise machine learning techniques to extract heuristics that allow us to reduce the search space and hence the time in which a good cartographical solution is reached. Both approaches are tested individually and in combination for the generalisation of buildings from map scale 1:5000 to the target map scale of 1:25 000. Our experiments show improvements in terms of efficiency and effectiveness. We provide evidence that both approaches complement each other and that a combination of expert and machine learnt rules give better results than the individual approaches. Both approaches are sufficiently general to be applicable to other forms of self‐evaluating, constraint‐based systems than multi‐agent systems, and to other feature classes than buildings. Problems have been identified resulting from difficulties to formalise cartographic quality by means of constraints for the control of the generalisation process.     

Influence of Surfactants on Degradation of 1‐(2‐Chlorobenzoyl)‐3‐(4‐chlorophenyl) Urea by Nanoscale Zerovalent Iron

Nanoscale zerovalent iron (NZVI) has been proved to be effective in the degradation of environmental pollutants and exhibits advantages in the removal of 1‐(2‐chlorobenzoyl)‐3‐(4‐chlorophenyl) urea (CCU), an analog of diflubenzuron. This present study focused on the influence of surfactants in the degradation procedure with NZVI in order to provide a simple and rapid removal method for CCU. Triton X‐100, Tween 20, Tween 80, sodium dodecyl sulfonate (SDS), and cetyltrimethylammonium bromide (CTAB) were investigated under anaerobic conditions. The experimental results demonstrated that the degradation rate increased sharply with the presence of SD during the first 15 min, up to 99.97% with addition of 0.01 g L^?1 SDS, whereas the presence of Triton X‐100, Tween 80, and Tween 20 resulted in a slight enhancement of the degradation of CCU. The enhancement strength of them was in the order Tween 20, Triton X‐100, and Tween 80. However, addition of the cationic surfactant CTAB resulted in a significant inhibitive effect. In contrast, the mixed surfactants did not result in the expected performance, and the performance was lower than that using some certain single surfactant among the mixed surfactants.