Applying disk-based discontinuous deformation analysis (DDA) to simulate Donghekou landslide triggered by the Wenchuan earthquake

In this paper, for the first time, disk-based discontinuous deformation analysis (DDA) is applied to simulate a real landslide triggered by an earthquake. For this purpose, the kinematic behaviour of the Donghekou landslide triggered by the Wenchuan earthquake is simulated and the results obtained using disk-based DDA are compared with actual data. The comparisons show that there is a good agreement between the results obtained using disk-based DDA and observed data. The simulation results provided an understanding of the failure behaviour and temporal evolution of the landslide. This study shows that disk-based DDA is a practical numerical tool that can be used to simulate the post-failure behaviour of landslides triggered by an earthquake.     

基于NMR的库区滑坡三维稳定性数值模拟

传统的勘探、测试手段, 难以获取可靠的滑坡岩土体水文参数, 直接影响滑坡研究的建模、评价工作.应用核磁共振找水方法并结合其他方法建立滑坡三维地质模型, 并提出基于NMR技术的库区滑坡稳定性研究思路.以赵树岭滑坡进行测试, 获取了岩土体的水文地质参数数据, 确定出该滑坡具有两层地下水, 上部潜水含水层, 下部微承压含水层; 具有两层滑面.该技术的分析结果与钻孔数据吻合较好, 可为建立符合实际的滑坡模型提供可靠依据.利用自编渗流-应力耦合有限元程序和ANSYS进行了145 m、175 m及175m降至145 m滑坡的稳定性模拟.结果表明: 145 m及175 m水位, 该滑坡整体处于稳定状态, 前缘随水位抬升局部破坏范围扩大; 175 m降到145 m时, 坡整体稳定性接近极限状态.且滑坡后缘局部位置出现小规模变形破坏的可能.      

隧道围岩结构地震动稳定性分析的动力有限元强度折减法

为了得到隧道围岩结构的地震动安全系数,借助通用有限元软件ANSYS,首先对水平地震作用下的模型进行模态分析,得到质量阻尼系数和刚度阻尼系数;其次由静力分析模型得到竖向边界上的水平向支座反力,然后将结构自重转化为温度边界条件,通过热分析得到模型各节点的温度,从而实现在动力分析中考虑重力的影响;最后采用悬臂梁动力分析模型,导入热分析获得的模型各节点的温度,并在竖向边界上施加水平向支座反力,通过不断折减围岩塑性区的凝聚力c和内摩擦角?,直到计算不收敛为止,从而得到隧道围岩结构的地震动安全系数。数值算例结果表明：采用的方法是可行的,将围岩结构自重转化为节点温度的措施解决了以往动力分析不能考虑结构自重的难点,进而为以后地震作用下隧道动力安全系数的计算及其工程应用提供了理论依据。     

斜坡地下水渗透力计算与稳定性分析

分析了基岩山区斜坡区域地下水的渗流模式,指出斜坡堆积体中地下水的一般特征,根据这个特征建立了条分法中斜坡渗透力的简易计算方法,用于改进传统的剩余推力法和Sarma法。该方法不需要额外补充参数,易于工程勘察人员掌握。提出通过极限状态考察斜坡安全储备的思路,对三峡库区某滑坡在水库蓄水前后的稳定性和安全储备进行了评价,结果表明传统方法计算的稳定性系数过高,当库水位快速下降时滑坡稳定性减弱,地下水渗透力是其中不可忽视的影响因素。     

水口山矿田矿床定位模式及找矿远景区评价

文章从水口山矿田所处大地构造背景及矿田构造岩浆作用分析入手,阐明了矿田内两大成岩成矿系列:Ⅰ与燕山中期中酸性侵入类有关的中温热液接触交代(夕卡岩)型铅锌铜银硫矿床,Ⅱ与燕山晚期英安质次火山-火山岩有关的浅成低温热液铅锌金银矿床.讨论了两者间的时空关系,分析了控矿因素,总结了矿床定位模式,并结合地物化遥资料进行了矿田内找矿远景区的评价.     

Elastic properties and stability of coexisting 3T and 2M 1 phengite polytypes

The elastic properties of coexisting natural 3T and 2M ₁ phengite samples (Cima Pal, Sesia Zone; Val Savenca; Western Alps, Italy) with similar chemical compositions have been studied by room temperature–high pressure powder diffraction, using synchrotron radiation on the ID9A beam-line at ESRF (Grenoble, France). The P–V curves have been modelled by the Birch–Murnaghan model; a third-order expansion fitted to the experimental data yields for 3T and 2M ₁ K ₀=60.4(±0.7) GPa, K′=5.79(±0.11) at V ₀=703.8851 ų, and K ₀=57.3(±1.0) GPa, K′=6.97(±0.24) at V ₀=938.8815 ų, respectively. The relative stability of 3T vs. 2M ₁ has been explored as a function of pressure and temperature in terms of configuration and deformation contributions to the Gibbs energy, using the elastic properties determined here and other thermodynamic parameters from earlier investigations. The results presented agree with the hypothesis of stability of the 3T polytype in the high pressure regime.     

非均质软土基坑抗隆起稳定性的极限分析方法

考虑到实际工程中土体非均质以及软土地区基坑开挖过程中土体稳定性的特点,将极限分析上限方法应用于非均质软土基坑抗隆起稳定分析计算中,讨论了极限分析方法的适用性问题。选用Prandtl机构建立了非均质软土地区基坑抗隆起稳定分析的运动许可速度场,根据速度场推导了极限分析上限方法的计算公式。讨论了该方法中土体强度、基坑宽度、支护墙体入土深度、基岩埋置深度等因素对坑底抗隆起稳定的影响。通过几个工程的计算与对比,验证了该方法的适用性和优越性。     

FLAC3D模拟全长注浆锚杆的作用效果

介绍了FLAC3D的基本原理及其求解过程。通过对某边坡进行数值模拟,对比分析了此边坡在锚杆支护前后水平位移等值线图、竖直位移等值线图及安全系数的变化,说明了FLAC3D模拟边坡开挖以及支护的简便性和锚杆对边坡稳定性的作用效果。     

Solutions for the deformations and stability of elastoplastic hollow cylinders subjected to boundary pressures

In this paper, a closed-form solution is presented for the stress and displacement distributions throughout a hollow cylinder subjected to uniform pressures acting on its internal and external boundary surfaces under plane strain conditions. The material is assumed to be elastoplastic, obeying a Mohr–Coulomb failure criterion, and exhibiting dilatant plastic deformation according to a non-associated flow rule. The newly developed analytical solution is verified through comparison with the solutions obtained from an infinite boundary problem (for which a closed-form solution exists), and numerical analyses using the program FLAC. The solution is also compared with the results of a borehole collapse test on a thick-walled hollow cylinder of synthetic shale. The analytical solution can be used to calculate the stress and displacement distributions around boreholes and other cylindrical cavities under both infinite and finite boundary conditions under both drained and undrained conditions. Copyright © 1999 John Wiley & Sons, Ltd.     

济阳坳陷特低渗透油藏地质多因素综合定量分类评价

在定量表征特低渗透油藏开发效果及地质特征的基础上,探讨特低渗透油藏开发效果主控地质因素。应用灰色关联分析法对济阳坳陷特低渗透油藏开展地质多因素综合定量分类评价,形成了一套以开发效果表征特低渗透油藏综合特征、从单井到区块基于灰色关联分析的特低渗透油藏地质多因素综合定量分类评价方法。研究结果表明,济阳坳陷特低渗透油藏主要为滩坝砂、浊积岩、砂砾岩沉积,具有埋藏深度大、粒度细、分选较好、孔喉微细、单层厚度薄、分布零散、比储量丰度低、流动性差的地质特点。定义累积产油差表征开发效果以反映特低渗透油藏综合特征,其主控地质因素为油层厚度层数比、砂岩厚度层数比、平均粒径、采油段中深、渗透率、孔隙度、比储量丰度。通过地质多因素综合定量分类评价,将济阳坳陷特低渗透油藏分为3类：Ⅰ类综合评价分数大于0.6,累积产油差大于4 500,开发效果最好;Ⅱ类综合评价分数0.4~0.6,累积产油差-2 500到4 500,开发效果中等;Ⅲ类综合评价分数小于0.4,累积产油差小于-2 500,开发效果差。利用不同区块已有开发数据检验,分类评价结果与实际生产情况一致性良好。Ⅰ类、Ⅱ类特低渗透油藏应该作为现阶段特低渗透油藏直井、水平井优先开发的对象。