天然气水合物成矿带的识别技术研究

在天然气水合物的地震资料解释过程中,常规地震剖面上难以识别水合物成矿带的准确位置。通过多年的实践对比研究,认为波形、速度反演、速度模型、流体因子、瞬时振幅、相对极性和能量半衰时等各种地震剖面,能够较好地揭示水合物成矿带的地球物理异常特征。收集整理了一部分国内外对水合物成矿带的识别技术,并提出了在无井的情况下,如何利用波形、速度和各种地震属性剖面所提供的信息来确定水合物成矿带的一些新想法,以期对水合物资源量的评估能提供比较有价值的参考依据。     

Inter sensor comparison between RESOURCESAT LISS III, LISS IV and AWiFS with reference to coastal landuse/landcover studies

Coastal zone assumes importance due to high productivity of ecosystems, man-made developmental activities, natural hazards and dynamic nature of the coast. As costal ecosystems are unique and fragile, understanding the impact of developmental activities on the sustainability of the coastal zone is very important. Remote sensing, because of repetitive and synoptic nature is an ideal tool for studying this. Time series data analyses for monitoring coastal zone require different type of sensors. Present study deals with atmospheric correction of satellite data, reflectance, selection of coastal features like, mudflat, mangroves, vegetated dune, coastal water, etc. and their inter-comparison using different sensor data of RESOURCESAT sensors. Reflectance values give better separateability for various coastal features in comparison to DN values. LISS IV can be used in place of LISS III or merged (LISS III + PAN) for long-term coastal zone studies.     

江西省永平铜矿西部排土场极限堆载高度确定

国内外对排土场极限堆载高度的理论计算缺乏研究,目前尚无成熟的统一理论计算方法。文章结合永平铜矿西部排土场的工程实例,在进行边坡工程地质条件勘察与排土场岩土物理力学性质试验研究的基础上,采用数值计算方法对排土场进行了分层堆载数值模拟计算。通过对计算结果的分析,得到位移、塑性区与安全系数随堆载高度的变化规律,并确定了该排土场的极限堆载高度。     

土地调查中有关城镇与农村土地面积问题的研究

第二次全国土地调查工作中,城镇与农村地区的土地面积在计算方法上有所不同：农村地区的土地面积是以椭球面为基准的面积,即球面面积;城镇地区的土地面积是以平面为基准的面积,即平面面积。二者之间存在差异并按一定规律变化,当调查区处于投影带边缘附近时,同一图斑的球面面积与平面面积之间的差异达到最大。由于采用不同的计算方法而导致面积数量的差异,在进行农村与城镇有关土地数据整合时会出现矛盾。为了建立城乡统一的土地管理信息系统,保证土地面积的一致性,应当采取相应措施消除二者之间的差异。     

Geochemical Eccentricity of Ground Water Allied to Weathering of Basalts from the Deccan Volcanic Province,India: Insinuation on CO<Subscript>2</Subscript> Consumption

Analyses of 72 samples from Upper Panjhara basin in the northern part of Deccan Plateau, India, indicate that geochemical incongruity of groundwater is largely a function of mineral composition of the basaltic lithology. Higher proportion of alkaline earth elements to total cations and HCO₃>Cl + SO₄ reflect weathering of primary silicates as chief source of ions. Inputs of Cl, SO₄, and NO₃ are related to rainfall and localized anthropogenic factors. Groundwater from recharge area representing Ca + Mg–HCO₃ type progressively evolves to Ca + Na–HCO₃ and Na–Ca–HCO₃ class along flow direction replicates the role of cation exchange and precipitation processes. While the post-monsoon chemistry is controlled by silicate mineral dissolution + cation exchange reactions, pre-monsoon variability is attributable chiefly to precipitation reactions + anthropogenic factors. Positive correlations between Mg vs HCO₃ and Ca + Mg vs HCO₃ supports selective dissolution of olivine and pyroxene as dominant process in post-monsoon followed by dissolution of plagioclase feldspar and secondary carbonates. The pre-monsoon data however, points toward the dissolution of plagioclase and precipitation of CaCO₃ supported by improved correlation coefficients between Na + Ca vs HCO₃ and negative correlation of Ca vs HCO₃, respectively. It is proposed that the eccentricity in the composition of groundwater from the Panjhara basin is a function of selective dissolution of olivine > pyroxene followed by plagioclase feldspar. The data suggest siallitization (L < R and R _k) as dominant mechanism of chemical weathering of basalts, stimulating monosiallitic (kaolinite) and bisiallitic (montmorillonite) products. The chemical denudation rates for Panjhara basin worked out separately for the ground and surface water component range from 6.98 to 36.65 tons/km²/yr, respectively. The values of the CO₂ consumption rates range between 0.18 × 10⁶ mol//km²/yr (groundwater) and 0.9 × 10⁶ mol/km²/yr (surface water), which indicates that the groundwater forms a considerable fraction of CO₂ consumption, an inference, that is, not taken into contemplation in most of the studies.     

Progresses in the ice formation of glaciers in China

Glaciers, formed by snowfall and characterized by movement and size, are the most sensitive indicators to climate change. The ice formation of glaciers (the processes, mechanisms and results of transformation from snow to ice) can indicate the growth condition, the formation process and the physical characteristics of glaciers. Its spatial variation can also reflect glacier change, and further reveal climate change. Studies on ice formation of glaciers in China were initiated in 1962, when Xie and others studied the ice formation of Glacier No.1 at the Urumqi River head, Tianshan Mountain. Other researchersfollowed suit and did studies on ice formation of glaciers in Qilian Mountain. As time goes by, the concept of ice formation came into being in China. This paper reviews the development history of glacier zones, and the studies of ice formation of glaciers in China since the 1960s. These studies mainly focus on Qilian Mountain, Tianshan Mountain, Altay Mountain, and the western Kunlun Mountain, Himalaya Mountain, the southeastern Tibetan and Hengduan Mountains. The paper also discusses the significance of ice formation studies, the limitation and deficiency of previous studies, and the prospects and suggestions for future studies. __________ Translated from Advances in Earth Science, 2007, 22(4): 386–395 [译自: 地球科学进展]     

浅谈测井方法在工程勘察中的应用

地球物理测井应用于工程勘察中,能够较好地解决用钻探不易解决的问题,如有效判别薄夹层、寻找井旁隐伏断裂破碎带、判断孔内土层稳定性以及测定土层的速度等。其中自然伽马测井曲线在判定含砾粘土夹层及软弱薄粘土夹层等方面具有较高的准确性;声波、井径、自然γ、视电阻率等测井方法可有效查找井旁隐伏断裂破碎带,特别是声波测井曲线异常更为明显;另外跨孔实测剪切波速还可进行地基土加固效果检验。     

苏里格气田盒8气藏气水层测井识别研究

鄂尔多斯盆地苏里格气田盒8气藏为弹性驱动的河流相低效气藏,储层非均质性强,在开发中普遍见水。根据试采情况将气藏储层分为气层、水层、气水层三类,开展气、水层的测井识别研究。以区内26口井50个射孔层段各层的试油结果作为依据,选出了700个样本点作为判识建模的标本,以声波时差和中子孔隙度等8个原始测井值作为判识变量组合,采用模糊判别分析,建立了各层的判识模型。回判结果表明,模型对气层精度达到97％,水层为89％,气水层为94％。利用未参加建模的出水井射孔段对模型进行验证,判识结果基本符合实际情况,模型具有较高精度。     

短周期仪器记录在远震分析中的应用

地震泼由多种频率成份组成,在其传播过程中。由于地球介质的滤波作用,随着传播距离的增大。高频成份逐渐被衰减。周期越大的成份传播越远。因此,在地震观测上,不同频带的地震仪用于观测不同震中距范围的地震,使仪器较好地响应,就我国台网而言,短周期仪用于地方震、近震的监测,中长周期仪和长周期仪用于远震,极远震的监测,其中长周期仪偏重于记录极远震。但作者在实际分析工作中注意到,短周期仪的记录应用于远震,极远震的分析,显示出独特的作用,充分挖掘和利用短仪资料,将会更加丰富远震、极远震的震相资料。本文以高台地震台的资料为依据,从震中距和震级角度,与中长仪和长仪作比较,对短仪记录远震、极远震的震相及特征作了统计分析与初步探讨,并对新疆地区“影区”地震S波的记录、日本地区地震_PPcP等震相的出现提出了现象的存在,给出了相应的观测结果,以待步一步研究。     

Scattering of elastic waves by a fracture zone containing randomly distributed cracks

We theoretically study the scattering ofP, SV andSH waves by a zonal distribution of cracks, which simulates a fault fracture zone. An investigation is conducted how the geometrical properties of the crack distribution and the frictional characteristics of the crack surface are reflected in the attenuation and dispersion of incident waves, as well as in the amplitudes of the transmitted and reflected waves from the zone. If the crack distribution within the fault zone changes temporally during the preparation process of the expected earthquake, it will be important for earthquake prediction to monitor it, utilizing the scattering-induced wave phenomena.We consider the two-dimensional problem. Aligned cracks with the same length are assumed to be randomly distributed in a zone with a finite width, on which elastic waves are assumed to be incident. The distribution of cracks is assumed to be homogeneous and sparse. The crack surface is assumed to be stress-free, or to undergo viscous friction; the latter case simulates fluid-filled cracks. The opening displacement of the crack is assumed to be negligibly small. The idea of the mean wave formalism is employed in the analysis, and Foldy's approximation is assumed.When the crack surface is stress-free, it is commonly observed for every wave mode (P, SV andSH) that the attenuation coefficientQ ^–1 peaks aroundka1, the phase velocity is almost independent ofk in the rangeka<1 and it increases monotonically withk in the rangeka>1, wherek is the intrinsicS wavenumber anda is the half length of the crack. The effect of the friction is to shift the peak ofQ ^–1 and the corner of the phase velocity curve to the low wavenumber range. The high wavenumber asymptote ofQ ^–1 is proportional tok ^–1 independently of model parameters and the wave modes. If the seismological observation thatQ ^–1 ofS waves has a peak at around 0.5 Hz in the earth's crust is combined with our results, the upper limit of crack size within the crust is estimated about 4 km. The information regarding the transmitted and reflected waves, such as the high wavenumber limit of the amplitude of the transmitted wave etc., allows estimation of the strength of the friction.