岩质高边坡岩体变形参数及松弛带厚度研究

预测岩质高边坡开挖后岩体变形模量的变化及松弛带厚度，是分析岩质高边坡在开挖后变形（位移）和作好防护设计的重要资料，运用波动力学关于平均应力与体积模量、岩体纵波速度与弹性模量、变形模量间的关系，通过部分实测资料及边坡应力场有限元分析的资料，分别建立了纵波速度与岩体变形模、岩体应力间的关系，研究了开挖边坡岩体变形模量的变化，预测了岩体松弛带的厚度。     

A new method of testing pile using dynamic P-S-curve made by amplitude of wave train

A new method of detecting the vertical bearing capacity for single-pile with high strain is discussed in this paper. A heavy hammer or a small type of rocket is used to strike the pile top and the detectors are used to record vibration graphs. An expression of higher degree of strain (deformation force) is introduced. It is testified theoretically that the displacement, velocity and acceleration cannot be obtained by simple integral acceleration and differential velocity when long displacement and high strain exist, namely when the pile phase generates a whole slip relative to the soil body. That is to say that there are non-linear relations between them. It is educed accordingly that the force P and displacement S are calculated from the amplitude of wave train and (dynamic) P-S curve is drew so as to determine the yield points. Further, a method of determining the vertical bearing capacity for single-pile is discussed. A static load test is utilized to check the result of dynamic test and determine the correlative constants of dynamic-static P(Q)-S curve. Foundation item: Key projects of the tenth Five-year Plan of Yunnan Province (documented Yunnan district [2002]54-02-02) and Geophysical Society of Yunnan Province.     

Geometric form of Haiyuan fault zone in the crustal interior and dynamics implications

The deep seismic reflection data on profile HY2 are reprocessed by the method of simultaneous inversion of velocity distribution and interface position. By the travel-time inversion with the data of the diving wave Pg and fault plane reflection wave, we determine the geometric form and velocity of Haiyuan fault zone interior and surrounding rock down to 10 km depth. The measured data show that the amplitudes have strong attenuation in the range of stake number 37–39 km, suggesting the fault zone has considerable width in the crustal interior. The results of this paper indicate that to the north of the fault zone the crystalline basement interface upheaves gradually from southwest to northeast and becomes shallow gradually towards northeast, and that to the south of the fault zone, within the basin between Xihua and Nanhua mountains, the folded basement becomes shallow gradually towards southwest. The obliquity of the fault zone is about 70° above the 3 km depth, about 60° in the range of the 3–10 km depths. From the results of this paper and other various citations, we believe that Haiyuan fault zone is in steep state from the Earth’s surface to the depth of 10 km. Foundation item: Joint Seismological Science Foundation of China (201001) and State Key Basic Research Development and Programming Project (95-13-02-02). Contribution No. RCEG200308, Exploration Geophysical Center, China Earthquake Administration.     

GOCE Gravity Field Processing Strategy

A processing strategy and the corresponding software architecture for the processing of GOCE (Gravity field and steady-state Ocean Circulation Explorer) observables is presented and described, with the major objective to compute a high-accuracy, high-resolution spherical harmonic model of the Earth's gravity field. The combination of two numerical solution strategies, i.e. the rigorous solution of the corresponding large normal equation systems applying parallel processing (on a PC cluster) as the core solver, and the fast semianalytic approach as a quick-look gravity field analysis (QL-GFA) tool, is proposed. Such a method fusion benefits from the advantages of the individual components: the rigorous inversion of the system providing also the full variance-covariance information, and the quickness enabling the consecutive production of intermediate gravity field solutions, for the purpose to analyse partial and incomplete data sets and to derive a diagnosis of the performance of the GOCE measurement system. The functionality and operability of the individual components are demonstrated in the framework of a closed loop simulation, which is based on a realistic mission scenario both in terms of the orbit configuration and the coloured measuring noise. Special concern is given to the accuracy of the recovered coefficients, the numerical behaviour, the required computing time, and the particular role of the individual modules within the processing chain. In the case of the core solver, it is demonstrated that the assembling and rigorous solution of large normal equation systems can be handled by using Beowulf clusters within a reasonable computing time. The application of the quick-look tool to partial data sets with short-term data gaps is demonstrated on the basis of several case studies. Additionally, the spectral analysis of the residuals of the adjustment is presented as a valuable tool for the verification of the noise characteristics of the GOCE gradiometer.     

Field vibration mitigation by honeycomb WIB for pile foundations of a high-speed train viaduct

Environmental vibrations from recent high-speed trains are becoming a special concern in the civil and environmental engineering field since they can give detrimental effects to residents, sensitive equipments and high-tech production facilities in the vicinity of train tacks. Herein, aiming at the vibration mitigation for a specific high-tech industrial area, the low-frequency vibrations from a train viaduct are targeted over an anticipated range. A theoretically designed innovative countermeasure, called honeycomb wave impeding barrier (WIB) for a wave impeding barrier, is introduced and its effects are investigated by computer simulation. The present WIB is based on the wave dispersion phenomenon that can modulate the incoming wavelengths into the shorter wavelengths, creating an apparent wave cut-off characteristic in the wave field across WIB installation area. The shorter wavelengths are further impeded due to the impedance ratio of the WIB walls and in-fill materials and absorbed by the in-fills more. The three-dimensional FEM simulation demonstrates a dramatic reduction effect that is difficult to achieve by conventional measures.     

Determination of S-wave velocity structure using microtremors and spac method applied in Thessaloniki (Greece)

Array measurements of microtremors at 16 sites in the city of Thessaloniki were performed to estimate the V_s velocity of soil formations for site effect analysis. The spatial autocorrelation method was used to determine phase velocity dispersion curves in the frequency range from 0.8–1.5 to 6–7 Hz. A Rayleigh wave inversion technique (stochastic method) was subsequently applied to determine the Vs profiles at all the examined sites. The determination of V_s profiles reached a depth of 320 m. Comparisons with V_s values from cross-hole tests at the same sites proved the reliability of the SPAC method. The accuracy of the V_s profiles, the ability to reach large penetration depths in densely populated urban areas and its low cost compared to conventional geophysical prospecting, make Mictrotremor Exploration Method very attractive and useful for microzonation and site effects studies. An example of its application for the site characterization in Thessaloniki is presented herein.     

In-plane and anti-plane strong shaking of soil systems and structures

The concept of in-plane and anti-plane shaking is introduced with a rigid block on a plane surface with Coulomb friction. Using a hypoplastic constitutive relation to model the mechanical behaviour of the soil, numerical solutions for a rigid block on a thin dry or saturated soil layer are obtained. The coupled nature of dynamic problems involving granular materials is shown, i.e. the motion of the block changes the soil state—skeleton stresses and density—which in turn affects the block motion. Motions of the block as well as soil response can be more realistically calculated by the new model. The same constitutive equation is applied to the numerical simulation of the propagation of plane waves in homogeneous and layered level soil deposits induced by a wave coming from below. Experiments with a novel laminar shake box as well as real seismic records from well-documented sites during strong earthquakes are used to verify the adequacy of the hypoplasticity-based numerical model for the prediction of soil response during strong earthquakes. The response of a homogeneous earth dam subjected to in-plane and anti-plane shaking is investigated numerically. In-plane and anti-plane shaking is shown to cause nearly the same spreading of a sand dam under drained conditions, whereas under undrained conditions anti-plane shaking causes stronger spreading of the dam. The dynamic behaviour of a breakwater founded on rockfill and soft clay during the 1995 Kobe earthquake is back-calculated to show the good performance of the proposed numerical model also with a structure. Section 9 deals with buildings on mattresses of densified cohesionless soils or fine-grained soils with granular columns, slopes with ‘hidden’ dams and structures on piles traversing clayey slopes to show the suitability of hypoplasticity-based models for the earthquake-resistant design and safety assessment of geotechnical systems.     

Evaluation of soil liquefaction in the Chi-Chi, Taiwan earthquake using CPT

During the 1999 Chi-Chi, Taiwan earthquake, many sand boiling phenomena were observed in central Taiwan, which caused severe ground settlement and structure damages. According to the installed accelerograms, the peak ground surface horizontal accelerations in the liquefaction-affected areas range from 774.42 to 121.3 gal. The writers carried out an extensive investigation of soil liquefaction in this earthquake. In this paper, we present results of the CPT exploration and post-earthquake liquefaction analysis. Two hundred and seventy five (275) cone penetration test data were collected from the liquefaction-affected areas, and 46 liquefaction case histories and 88 non-liquefaction case histories were derived that can be used to evaluate the accuracy of existing liquefaction evaluation models. In addition, the strength of the liquefied soils after earthquake and the implication of its liquefaction potential in the future event are discussed.     

Are open fractures necessarily aligned with maximum horizontal stress?

Fluid flow in fractured rock is an increasingly central issue in recovering water and hydrocarbon supplies and geothermal energy, in predicting flow of pollutants underground, in engineering structures, and in understanding large-scale crustal behaviour. Conventional wisdom assumes that fluids prefer to flow along fractures oriented parallel or nearly parallel to modern-day maximum horizontal compressive stress, or S_Hmax. The reasoning is that these fractures have the lowest normal stresses across them and therefore provide the least resistance to flow. For example, this view governs how geophysicists design and interpret seismic experiments to probe fracture fluid pathways in the deep subsurface. Contrary to these widely held views, here we use core, stress measurement, and fluid flow data to show that S_Hmax does not necessarily coincide with the direction of open natural fractures in the subsurface (>3 km depth). Consequently, in situ stress direction cannot be considered to predict or control the direction of maximum permeability in rock. Where effective stress is compressive and fractures are expected to be closed, chemical alteration dictates location of open conduits, either preserving or destroying fracture flow pathways no matter their orientation.     

Investigation of upper crust anisotropy in Ghaen-Birjand region, east-central Iran

IntroductionWhenpropagatingthroughananisotropicmedium,ashearwavesplitsintotwo(quasi)shearwaveswithdifferentpropagationspeedsandpolarizedorthogonally.Owingtotherecentdevel-opmentofseismicobservationsystem,detectionofshearwavessplittingwithverysmalldelaytimesbetweenfasterandslowershearwavesbecameavailableandprovidedpowerfulapproachfordetectionofcrustalanisotropy.Crampin(1978)emphasizedtheroleofalignedmicrocracksasacauseofcrustalanisotropyandpointedoutthatforverticallyalignedmicrocracksthedirecti…