基于遥感影像理解模型的土地利用时空变化监测——以龙口市为例

本文从遥感影像理解模型出发,探讨了遥感信息的知识发现及特征提取问题,特别针对士地利用研究领域,提出了纳入GIS信息的遥感影像综合理解模型,将GIS数据(主要包括高程和坡度)与遥感影像结合起来,从中发现知识,并将知识用于遥感影像的专题信息提取,建立了地学规律知识库,从而提高了遥感影像的分类精度。本文基于遥感影像理解模型,发现土地利用变化区域,提取变化信息,动态地监测了龙口市土地利用的时空变化情况。     

Formation Dynamics and Quantitative Prediction of Hydrocarbons of the Superpressure System in the Dongying Sag

Based on the theory of formation dynamics of oil/gas pools, the Dongying sag can be divided into three dynamic systems regarding the accumulation of oil and gas： the superpressure closed system, the semi-closed system and the normal pressure open system. Based on the analysis of genesis of superpressure in the superpressure closed system and the rule of hydrocarbon expulsion, it is found that hydrocarbon generation is related to superpressure, which is the main driving factor of hydrocarbon migration. Micro fractures formed by superpressure are the main channels for hydrocarbon migration. There are three dynamic patterns for hydrocarbon expulsion： free water drainage, hydrocarbon accumulation and drainage through micro fissures. In the superpressure closed system, the oil-driving-water process and oil/gas accumulation were completed in lithologic traps by way of such two dynamic patterns as episodic evolution of superpressure systems and episodic pressure release of faults. The oil-bearing capacity of lithologic traps is intimately related to reservoir-forming dynamic force. Quantitative evaluation of dynamic conditions for pool formation can effectively predict the oil-bearing capability of traps.     

GPS应用于高空施工机械安全监控

结合小湾水电站建设施工情况,利用实地采集的GPS定位数据,探讨使用GPS实时动态定位技术构建高空施工机械安全监控系统的实现原理和可行性,同时介绍构成系统的各个模块及其功能,给出有效地实施高空施工机械安全运行监控的实用方法。     

基于权变理论的滑坡灾害监测预报思路探讨

文章简要评述了地质灾害基础理论与应用技术发展现状、滑坡灾害多种监测预报判据的利弊。利用综合信息处理决策方法,提出了基于权变理论的滑坡灾害监测预报新思路。分析了滑坡成灾的权变特征、环境因素和决策因素,建立了滑坡灾害预报决策概念模型。进一步探讨了在预报决策中应遵循的动态性及满意性原则,为提高地质灾害监测预报理论的科学性提供了新的理论依据与技术途径。     

Bringing GPS into harsh environments for fully automated deformation monitoring

Engineering projects that require deformation monitoring frequently utilize geodetic sensors to measure displacements of target points located in the deformation zone. In situations where control stations and targets are separated by a kilometer or more, GPS can offer higher precision position updates at more frequent intervals than can normally be achieved using total station technology. For large-scale deformation projects requiring the highest precision, it is therefore advisable to use a combination of the two sensors. In response to the need for high precision, continuous GPS position updates in harsh deformation monitoring environments, a software has been developed that employs triple-differenced carrier-phase measurements in a delayed-state Kalman filter. Two data sets were analyzed to test the capabilities of the software. In the first test, a GPS antenna was displaced using a translation stage to mimic slow deformation. In the second test, data collected at a large open pit mine were processed. It was shown that the delayed-state Kalman filter developed could detect millimeter-level displacements of a GPS antenna. The actual precision attained depends upon the amount of process noise infused at each epoch to accommodate the antenna displacements. Higher process noise values result in quicker detection times, but at the same time increase the noise in the solutions. A slow, 25 mm displacement was detected within 30 min of the full displacement with sigma values in E, N and U of ±10 mm or better. The same displacement could also be detected in less than 5 h with sigma values in E, N and U of ±5 mm or better. The software works best for detecting long period deformations (e.g., 20 mm per day or less) for which sigma values of 1–2 mm are attained in all three solution components. It was also shown that the triple-differenced carrier-phase observation can be used to significantly reduce the effects of residual tropospheric delay that would normally plague double-differenced observations in harsh GPS environments.

一种时空数据静态可视化表达方法

本文简要介绍了时空数据可视化的必要性,以及目前人们采用的时空数据可视化方法,并分析了这些方法的局限性,提出了一种将年轮(annual ring)作为时空载体,结合视觉变量对面状地物的属性数据进行静态可视化的方法。该方法将面状地物的同心环按照类似树木年轮的生长特征进行划分,作为空间和时间的载体,不同时期属性数据映射到相应的同心环中,同心环的厚度和色彩的差异揭示了属性数据的变化。最后以武汉市城市管理网格化平台的统计评价数据为例实现了对比率量表数据的时态可视化表达。本文所提出的静态时空可视化方法将面状地物的空间、属性和时间紧密地结合在一起,克服了以往静态可视化方法中时间-空间、时间-属性相分离的不足,试验证明了这种方法在实践中的可行性。     

UKF算法及其在GPS卫星轨道短期预报中的应用

分析了GPS卫星预报星历,在比较分析EKF和UKF优缺点的基础上,将UKF引入GPS卫星轨道预报研究中.数值模拟和结果分析表明,UKF方法预报更稳定,能有效地提高轨道预报精度和稳定性.     

基于ArcScene的建筑物日照分析模块的设计与实现

介绍了利用ArcObjects开发、基于ArcScene的建筑物日照分析模块的研制,对各个子模块作了介绍。特别对涉及到的日照分析技术、阴影动态显示、3维建筑设计等技术做了详细的说明。最后对该模块的应用做了简要演示。     

GM（1，1）动态模型在吴江市地下水水位预测中的应用

以吴江市地下水水位预测为例,详细阐述了地下水水位时间序列的GM（1,1）动态模型的原理和建立过程,并根据模型的预测值和实测值,对模型的精度进行了检验,结果表明,模型的预测精度达到了99．27％,等级属于Ⅰ级,具有实际的应用价值,为地下水资源的科学管理提供了依据。     

南京某深基坑边坡支护设计与施工

南京某深基坑周边环境较为复杂,地下水丰富,基坑开挖较深,最深处达13m。根据周边环境的情况和开挖的深度,采用了钻孔灌注桩和土钉锚杆相结合的支护形式。分析了该基坑施工的技术要点,通过监测结果,说明该支护方案是可行的。