Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.     

中国海区区域地质编图中重磁图的编制方法

本文简要介绍了局控项目《中国海区１∶５０万区域地质编图（大连幅）》重力异常图、磁力异常图的编制过程，给出了一种以计算机为手段、实现编图自动化的新方法，并分析了该方法与以往编图方法的不同和优点，以国际分幅在中国海区开展区域地质编图尚属首次，在既无海区地质调查规范，又无海区地质调查编图规范的情况下，这一工作无异具有开创性。从理论上系统总结出一套切实可行的编图方法，对于编制中国海区区域地质调查编图规范以     

走航测深数据的自动采集

本文介绍应用IBM微机实现走航实时水深及定位数据的自动采集系统。给出了联机系统方框图及采集、传送数据的程序流程图。并对IBM-PC/XT微机与测深仪之间的接口、数码转换和数据处理作了简要的叙述。     

北太平洋宽吻海豚正常生理指标数值的算法

连续5年对青岛海豚表演馆中北太平洋宽吻海豚(Tursiops gille Dall)进行现场实验和行为学研究，获取了大量的生理指标数据，运用不同的分析和计算方法对所得数据进行了筛选、剔除及处理，确立了海豚各生理指标的正常闽值和范围确定的方法，从而为准确了解海豚机体的生理状况、疾病诊断及治疗奠定了基础。     

珠江口伶仃洋锋的类别及其对沉积的影响

根据近年在珠江口伶仃洋的观测资料，对比国外有关河口锋的定义，归纳了伶仃洋内几种锋的现象，计有潮侵锋、岬角锋及湖水退急时的浅滩锋等。解释了锋生的原因与潮汐进退，特别与随潮入侵的咸水关系。文中也探讨了这些锋对沉积环境的影响，认为它是陆架水入侵河口地区的一种不容忽视的沉积动力过程。     

关于胶莱盆地东南缘基性火山熔岩喷发时代上限的讨论

首次对采自青岛即墨WN部两个深钻孔中新鲜玄武岩样品进行Rb-Sr同位素测年,测定年龄值为65.77±13.6Ma。认为该年龄值代表了胶莱盆地东南缘基性火山熔岩喷发的时代上限,对于整个胶莱盆地中基性火山岩的划分和对比具重要的年代学意义。     

埕岛油田数据基础重组及开发应用

从数据管理及后期应用的角度提出了数据平台的要领，讨论了该数据平台的物理结构、逻辑结构，在分类与组织的基础上给出了相应的数据字典。同时，还基于该平台探讨了测井曲线库及图形库的建设方法，并实现了具体功能。     

自动海洋站数据接收与处理软件的功能及特点

采集设备采集数据发送到值班PC机，在无人干预的情况下接收处理软件自动对数据进行回放和进一步处理，为用户提供数据产品和服务，并提供一个界面，使用户能够了解系统的运行状况，获得相关数据和状态参数。     

I(L)值完全诱导空间

作者引入 I(L)值完全下半连续映射 ,研究其性质。利用 I(L)值完全下半连续映射定义I(L)值完全诱导空间 ,给出 I(L)值完全诱导空间的拓扑基的表达形式 ,证得两个 I(L)值完全诱导空间的映射是连续映射的充分必要条件 ,并建立了乘积空间的 I(L)值完全诱导空间与 I(L)值完全诱导空间的乘积空间的联系