Geomechanical Properties of Shear Zones in the Eastern Aar Massif,Switzerland and their Implication on Tunnelling

Summary ¶Rock zones containing a high fracture density and/or soft, low cohesion materials can be highly problematic when encountered during tunnel excavation. For example in the eastern Aar massif of central Switzerland, experiences during the construction of the Gotthard highway tunnel showed that heavily fractured areas within shear zones were responsible for overbreaks in the form of chimneys several metres in height. To understand and estimate the impact of the shear zones on rock mass behaviour, knowledge concerning the rock mass strength and deformation characteristics is fundamental. A series of laboratory triaxial tests, performed on samples from granite- and gneiss-hosted shear zones revealed that with increasing degree of tectonic overprint, sample strength decreases and rock behaviour shows a transition from brittle to ductile deformation. These trends may be explained by increasing fracture densities, increasing foliation intensity, increasing thickness of fine-grained, low cohesion fracture infill, and increasing mica content associated with the increasing degree of tectonic overprint. As fracture density increases and the influence of discrete, persistent discontinuities on rock mass strength decreases, behaviour of the test samples becomes more and more representative of rock mass behaviour, i.e. that of a densely fractured continuum. For the purpose of numerical modeling calculations, the shear zones may be subdivided with respect to an increasing fracture density, foliation intensity and mica content into a strongly foliated zone, a fractured zone and a cohesionless zone, which in turn exhibit brittle, brittle-ductile and ductile rock mass constitutive behaviour, respectively.Received December 17, 2001; accepted January 9, 2003 Published online April 29, 2003     

Magnetotelluric Investigation of the Hydrothermal System and Heat Source in the Muine-Toyoha Geothermal Area, Hokkaido, Japan

Abstract. Magnetotelluric (MT) surveys were carried out around the Muine volcano, Hokkaido, Japan, where it is expected that the heat and metal source forming the polymetallic Ag-Pb-Zn-Cu-In Toyoha deposit is present at depth. Measurements were performed at 20 sites, 18 of which were located along a WSW-ENE profile traversing the north ridge of Mt. Muine. A resistivity model obtained from 2D inversion of the MT data shows subsurface specific conductive and resistive features. Conductive layers are present at the surface of Mt. Muine. The low resistivity is probably due to the clay-rich rocks associated with the hydrothermal alteration. A high resistivity layer, which corresponds to the pre-Tertiary Usubetsu Formation, crops out east of Mt. Muine and dips westward. At the west foot of Mt. Muine, relatively high resistive layers are widely exposed. The resistivity increases with depth and exceeds 1000 ohm-m. This fact indicates that this region is not influenced by the recent hydrothermal activity. An extremely conductive zone about 3–6 km wide and 6–9 km thick exists at a depth of 2 km below Mt. Muine. This zone mostly corresponds to an elastic wave attenuation zone detected by a seismic survey. It is interpreted as a large hydrothermal reservoir or melted magma, which is a heat source of the hydrothermal system in this area.     

小湾电站高边坡系统锚固与排水的优化设计方法

据小湾电站地下厂房进水口开挖高边坡的岩体结构与工程地质特征,采用基于结构面网络模拟的随机楔体稳定分析方法对边坡的稳定性进行了三维分析。进一步运用风险分析理论对边坡系统锚杆与预应力锚索的布置进行了优化设计,最后运用结构面网络模拟理论对排水方案进行了优化设计。     

兴山县龙王嘴边坡稳定性分析与加固设计

龙王嘴边坡系坡高达70 m、坡角达70 °的高陡岩质边坡。分析了宜-秭公路石峡段龙王嘴高边坡变形的地质条件,在定量评价龙王嘴高边坡稳定性的基础上,进行了该高边坡的施工图加固设计。根据其特点将350 m长的坡段分为A,B,C三个区,分别采取预应力锚索与锚杆加固、挂网喷射混凝土支护和喷射混凝土支护等措施,实践证明,工程治理效果良好。     

宜兴抽水蓄能电站试验洞的反分析研究

结合江苏宜兴抽水蓄能电站地下厂房试验洞量测资料的分析,研究了成层各向异性岩体中洞室工程问题的反分析方法。采用分层均质模型进行反分析计算。计算区域的各层岩层均被分别视为均质各向同性体,初始地应力假设呈线性分布。有限元分析中,对倾斜成层的岩层、软弱夹层及断层节理等分别划分了单元,据以模拟成层岩体的各向异性特征。为使计算过程简化,对离洞室较远的岩层拟按地质资料对材料特性参数赋值,反分析计算的目标未知数为初始地应力和试验洞相邻围岩的弹性模量。结果表明,与工程实践符合较好。     

ZWICK-100高频试验机在岩石力学性能研究中的应用

从岩石强度理论及振动理论的基本原理出发,通过实验的方法,对岩石在静动态荷载下的力学性能进行了试 验分析,通过实验初步掌握了Zwick--100HFP5100高频振动实验机在岩土工程某些领域的应用。     

济宁二号矿孤岛工作面冲击矿压危险及其控制

孤岛工作面及其周围巷道附近应力集中程度高,顶板运动剧烈,再加上地质构造的影响,采深较大时,冲击危险程度就高,很容易引发冲击矿压。《煤矿安全规程》要求孤岛工作面按冲击矿压危险工作面来管理。孤岛工作面冲击矿压危险检测预报及控制的技术是先分析冲击危险程度,确定冲击危险指数,提出早期预报;采用电磁辐射和钻屑法进行及时预报;采用卸压爆破进行处理,并采用电磁辐射和钻屑法检验防治措施的效果。实践证明,这套技术安全、可靠、有效,能够保证工作面的安全高效生产。     

1991年江淮暴雨时期的能量和水汽循环研究

通过对 1991年 5～ 7月江淮暴雨期全球范围的水汽输送和不同降水过程中江淮暴雨区及其临近区域的水汽收支和视热源和视水汽汇的计算分析得到了以下结论 :( 1)从水汽输送的机制来看 ,一方面 ,有大量的水汽以定常涡动的方式从孟加拉湾及南海输送到中国江淮地区 ;另一方面 ,江淮地区的瞬变涡动水汽向北输出 ,这可能与江淮地区频繁活动的α和β中尺度系统有关 ,它们将江淮地区汇集的充沛的水汽除了大部分以降水形式降下外 ,剩余部分继续向水汽较少的高纬地区输出 ,以维持全球水汽的平衡。( 2 )在降水过程中 ,局地蒸发项在水汽的供应中或再循环中十分重要 ,其数值一般为降水量的 13 ～ 12 ,这与1998年的降水情况相似。( 3 )在降水过程中 ,暴雨区的水汽主要是从南边界和西边界流入的 ,东边界和北边界则流出 ,并且水汽的流入、流出主要在中低层进行。 (a)在流入边界上 ,水汽通量的垂直分布存在差异 ,暴雨区西边界和南边界的水汽流入的垂直差异可能与其所在的地理位置有密切关系。 (b)对于暴雨区 ,不同强度的降水过程水汽的主要来源有所不同。( 4)在 5次降水过程中 ,视热源和视水汽汇的较大值对应降水的大值区 ,表明了水汽凝结加热对大气加热所起的主要作用。梅雨期降水 ,以对流性降水为主 ,对流活动随季节变化     

The numerical simulation of thesource development of the Tangshan earthquake

Ｔｈｅｎｕｍｅｒｉｃａｌｓｉｍｕｌａｔｉｏｎｏｆｔｈｅｓｏｕｒｃｅｄｅｖｅｌ┐ｏｐｍｅｎｔｏｆｔｈｅＴａｎｇｓｈａｎｅａｒｔｈｑｕａｋｅＺＨＩ－ＲＥＮＮＩＵ（牛志仁）ＤＡＮＧ－ＭＩＮＣＨＥＮ（陈党民）ＢＩＮＧ－ＱＩＡＮＬＩ（李炳乾）Ｓｅｉｓｍｏｌｏ...     

地磁1年周期变化的响应函数

用通日月均值减去夜均值计算的月均值资料和Ｓｏｍｐｉ谱分析法分析了１４个台站的北向分量１年周期变化的振幅向相位，时段为１９８４－１９８８年。分析结果显示用Ｐ＾０ｎ（ｄｎｄ＝１，…，６）复合模式的估算的Ｃ值较合理。各台的Ｃ值比较一致。