南设得兰群岛西海域S_(11)岩芯沉积物中碎屑矿物及沉积作用的探讨

本文对南设得兰群岛西海域S_(11)钻孔岩芯中的重、轻矿物作了描述,按矿物在垂直方向上的变化和优势矿物种确定矿物组合类型,并将晚更新世到全新世的341cm沉积地层划分为四层:1.上火山碎屑矿物沉积层,2.中火山碎屑矿物沉积层,3.火成碎屑矿物沉积层(深海砂层),4.下火山碎屑矿物沉积层。本文还讨论了物质来源和深海砂层的可能成因。     

非点源污染的流域分配方法研究

农业非点源污染的流域分配研究对于提高环境质量具有重要的现实意义。根据遥感技术得到的土地利用类型、河网、道路、圩区等信息,结合地理信息系统（GIS）的空间分析功能,对非点源污染负荷进行了定量计算及可视化分析,在此基础上,得到各主要河段的污染分配量,这可为寻求流域内合理的土地利用模式和农业非点源污染排放总量的控制方法提供决策依据。     

Identification of modal parameters of a 600-m-high skyscraper from field vibration tests

Accurate prediction of the dynamic responses of a high-rise building subjected to dynamic loads such as earthquake and wind excitations requires the information of its structural dynamic properties such as modal parameters including natural frequencies and damping ratios. This paper presents the identification results of the modal parameters based on field vibration tests on a 600-m high skyscraper. A set of tests, including ambient vibration test (AVT) and free vibration test (FVT), were conducted on the skyscraper to identify its modal parameters. Firstly, this paper presents and discusses the modal parameters of the skyscraper assessed by several identification methods applied to the AVT measurements. These methods include the wavelet transform (WT) method, the stochastic subspace identification (SSI) method, and the random decrement technique (RDT). Secondly, an active mass damper (AMD) system with total mass 1000 tons equipped into the skyscraper was used to excite the building for estimation of the modal parameters by FVT. Thirdly, this paper presents observations on the structural dynamic behavior of the skyscraper with the operation of the AMD system during a typhoon event. The field measurement results show that the AMD system functioned efficiently for suppression of the wind-induced vibrations of the skyscraper during the typhoon. This paper aims to further understand the structural dynamic properties of super-tall buildings and provide useful information for structural design and vibration control of future skyscrapers.     

Discussion of user-defined parameters for recursive subspace identification: Application to seismic response of building structures

Structural damage assessment under external loading, such as earthquake excitation, is an important issue in structural safety evaluation. In this regard, an appropriate data analysis and system identification technique is required to interpret the measured data and to identify the state of the structure. Generally, the recursive system identification algorithm is used. In this study, the recursive subspace identification (RSI) algorithm based on the matrix inversion lemma algorithm with oblique projection technique (RSI-Inversion-Oblique) is applied to investigate the time-varying dynamic characteristics. The user-defined parameters used in the RSI-Inversion-Oblique technique are carefully discussed, which include the size of the data Hankel matrix (i), model order to extract the physical modes, and forgetting factor (FF) to detect the time-varying system modal frequencies. Response data from the Northridge earthquake from the Sherman Oaks building (CSMIP) is used as an example to examine a systematic method to determine the suitable user-defined parameters in RSI. It is concluded that the number of rows in the data Hankel matrix significantly influences the identification of the time-varying fundamental modal frequency of the structure. An algorithmic model order selection method using the eigenvalue distribution of RSI-Inversion can detect the system modal frequencies at each appending data window without causing any abnormality.     

Early Identification of the Jiangdingya Landslide of Zhouqu Based on SBAS-InSAR Technology

SBAS-InSAR technology is characterized by the advantages of reducing the influence of terrain-simulation error, time-space decorrelation, atmospheric error, thereby improving the reliability of surface-deformation monitoring. This paper studies the early landslide identification method based on SBAS-InSAR technology. Selecting the Jiangdingya landslide area in Zhouqu County, Gansu Province as the research area, 84 ascending-orbit Sentinel-1A SAR images from 2015 to 2019 are collected. In addition, using SBAS-InSAR technology, the rate and time-series results of surface deformation of the landslide area in Jiangdingya during this period are extracted, and potential landslides are identified. The results show that the early landslide identification method based on SBAS-InSAR technology is highly feasible and is a better tool for identifying potential landslides in large areas.     

鄂西地区宽频地震台阵背景噪声特征

利用鄂西地区长时间段宽频地震台站的三分量背景噪声记录,采用波形互相关方法得到台站对间的互相关函数,并通过聚束分析获得瑞雷波和勒夫波的慢度谱,研究鄂西地区背景噪声源的时空分布特征。结果表明,5~10 s周期范围,背景噪声来源于南太平洋且没有季节变化;10~20 s周期范围,慢度谱上显示明显的能量环,表明噪声源来源于多个方向,且表现出强烈和急剧的季节变化;20~40 s周期范围,慢度谱上也存在明显的能量环,其产生机制可能与此周期下提出的次重力波机制相似。在不同的周期范围内,噪声源分布方位有所不同,但在周期10~40 s范围噪声源在各方向均有分布。因此,利用长时间段连续噪声数据计算的互相关函数在周期10~40 s范围内满足背景噪声面波层析成像的理论前提。     

单片机控制下地震勘探应答器集成音频声源级控制方法

以往地震勘探应答器控制方法,不能有效减少噪声对应答器集成音频存在的干扰,导致应答器音质存在杂音,影响使用效果。为此,提出单片机控制下地震勘探应答器集成音频声源级控制方法,构建基于单片机控制的地震勘探应答器,应答器包含了供电模块、主控模块、功放模块、匹配模块、接收模块、收发合置模块以及收/发换能器,采用单片机获取内部输出的工作情况,并基于稀疏正则化的集成音频声源布局优化方法,实现声源级控制。结果表明:所提方法能够有效强化单片机控制下地震勘探应答器集成音频效果,且去噪效果好,该方法控制下应答器工作线性度较优,能够为地震勘探提供更好的勘探方法和勘探设备。     

基于类柔度差曲率和频率摄动的结构损伤识别

为提高梁式结构损伤诊断的效率,提出一种基于类柔度差曲率和频率摄动的结构损伤识别方法。首先根据结构振动理论,研究广义柔度矩阵计算公式;再利用模态柔度对结构损伤灵敏性高的优点,改进基于柔度差曲率的损伤定位指标,定义类柔度差曲率LCFC损伤指标,并初步识别损伤;最后基于矩阵摄动进行结构损伤识别结果确认。考虑多种损伤工况,对一简支梁结构进行损伤识别数值模拟验证。结果表明:仅使用一阶模态,建立的类柔度差曲率LCFC指标对梁式结构损伤定位具有良好的诊断效果,且计算工作量小;对于含边界损伤单元的多损伤工况,当损伤程度大于10%时,LCFC指标识别有效;当损伤程度不大于25%时,各工况二阶摄动识别结果精度较高,相对误差较一阶摄动结果明显降低,证明了该方法的实用性、有效性和精确性。     

Nonlinear dynamic tests of a reinforced concrete frame building at different damage levels

This paper discusses the dynamic tests of a two-story infilled reinforced concrete (RC) frame building using an eccentric-mass shaker. The building, located in El Centro, CA, was substantially damaged prior to the tests due to the seismic activity in the area. During the testing sequence, five infill walls were removed to introduce additional damage states and to investigate the changes in the dynamic properties and the nonlinear response of the building to the induced excitations. The accelerations and displacements of the structure under the forced and ambient vibrations were recorded through an array of sensors, while lidar scans were obtained to document the damage. The test data provide insight into the nonlinear response of an actual building and the change of its resonant frequencies and operational shapes due to varying damage levels and changes of the excitation amplitude, frequency, and orientation.     

Sedimentary and geochemical characterization of Middle–Late Miocene formations in the Neogene Tsugaru Basin,Japan by means of DTH27‐1 well sediment analysis

Middle–Late Miocene age siliceous formations outcropping along the northwestern side of Honshu Island are considered prospective source rocks for hydrocarbons. An analysis of geophysical, sedimentological, and geochemical properties is essential to evaluate the formations' source potential, and to understand the factors that determined the accumulation and preservation of organic matter. This study investigates the Middle–Late Miocene geological record of the Tsugaru back‐arc basin, located in the western part of Aomori prefecture, through an analysis of a 200 m long portion of a core from the DTH27‐1 well; this core is composed of the diatomaceous siltstones of the Akaishi Formation and the siliceous mudstones of the Odoji Formation. Sedimentological and geophysical characterization showed that the Akaishi Formation's diatomaceous siltstones are mostly massive and bioturbated, have low magnetic susceptibility, and demonstrate moderate natural radioactivity. Although the Odoji Formation's siliceous mudstones are massive, they have exceedingly low magnetic susceptibility and high natural radioactivity. Geochemical data from a Rock‐Eval Pyrolysis such as total organic carbon and generative potential (S1 + S2) revealed that, in the Tsugaru area, only the Odoji Formation is a likely prospective source rock for hydrocarbons. On the other hand, T_max values indicate that both the formations are thermally immature for generating hydrocarbons. The difference between the Akaishi and Odoji Formation in the sedimentological facies, in terms of the degree of bioturbation and the organic carbon content, indicates variations in lithological properties, such as porosity and grain size; moreover, this difference indicates a variation in the paleo‐oxygenation of bottom waters, with the transition from oxygen‐deficient conditions in the Middle Miocene to the more oxygenated conditions in the Late Miocene. Both the lithological and paleo‐environmental factors possibly influenced the organic richness in the two formations.