青海共和盆地地热资源热源机制与聚热模式

青海共和盆地东侧贵德扎仓热田是探讨共和盆地地热资源成因的关键地区。本文综合区域地质、岩石热物性、同位素年代学、水文地球化学和地球物理测量等方法,重点分析了共和盆地的构造背景和热源机制,深入研究了共和盆地地热能系统的关键环节。研究发现:①识别出盆地地壳15 km以下深度发育高导体,并可与新生代青藏高原东部中-下地壳发育的层状低速高导层对比;②近NW-NS向的瓦里贡左旋走滑逆冲断裂是扎仓热田重要的控热和导热断裂;③晚中生代花岗岩与上覆围岩具有显著的热导率;④温泉氢氧同位素指示水源以地表水补给为主;⑤存在浅层新生界碎屑岩中-低温热储和深层花岗岩中-高温热储,发育四层两类地热资源。综合分析提出了共和盆地干热岩三元聚热模式:即新生代中-下地壳发育的高温低速高导层是主要热源,中晚三叠世花岗岩是良好的导热和储热体,既是干热岩母岩,也是热储,新生代低热导率沉积岩是良好的盖层。研究对于青藏高原地热成因、资源预测、开发规划等具有参考意义。     

长江黄河源区高寒草甸退化研究进展

长江黄河源区内高寒草甸退化是当前研究的热点问题之一。但多数研究中涉及的源区范围、高寒草甸的分类、高寒草甸的退化原因及恢复治理措施等方面,各学者的看法并不相同,难以实现各项研究结果的比较研究。从源区范围、高寒草甸的分类、高寒草甸的退化原因及恢复治理措施等方面阐述了各学者研究的差异,指出:长江黄河源区高寒草甸的进一步深入研究有必要对源区的范围进行界定;高寒草甸的分类常常因研究目的不同而有所差异,以退化程度进行的分类能够反映高寒草甸的动态变化过程,但需要定量指标对退化的不同程度进行界定;遥感影像解译的结果由于遥感影像本身的不确定性和主观因素的影响而难以统一;退化的原因目前主要集中于自然因素和人为因素两方面的研究,针对这些因素采取的控制措施在局部区域取得了一定效果,但并没有抑制高寒草甸在总体上的进一步退化,寻找一种综合的有效的治理措施还是今后的研究目标。     

CSAMT和MT在兰州新区地热勘查中的应用探讨

兰州新区地处秦王川盆地,盆地内具有地热形成的条件,地热成因兼有断裂构造控制型和沉积盆地型,具有较好的地热勘查前景。结合可控源音频大地电磁测深、大地电磁测深2种方法相互验证,查清了区内断裂构造,基底构造形态,为地热勘查提供了依据,避免了单一方法的片面性和盲目性。经钻孔验证勘查效果较好,为今后类似地区进行地热勘查提供了有价值的参考。     

新矿物与新矿物研究创新探索

作为矿物学的重要基础研究方向之一,新矿物的发现及其晶体结构、晶体化学的研究始终备受各发达国家的一贯重视。新矿物的研究和发现及其成果具有国际性,在一定程度上反映了国家在该领域以及整体科技水平和对科学发现的贡献。笔者近年来参与了对若干存疑矿物进行的精细晶体结构与晶体化学研究和矿物学研究,从2005年至今参与发现的23种新矿物均获得国际矿物学协会新矿物及分类命名委员会(IMA-CNMNC)所批准。这些新矿物的获批得益于成功地获取了成分数据、衍射数据和晶体结构的阐明。本文就新矿物的认定规则、申报内容和数据、分类命名、研究内容及工作方法等进行综述,在此抛砖引玉,希望通过交流促进我国新矿物研究领域的发展。     

烃源岩不同性质有机酸的分离及其检测方法

烃源岩中的有机酸来源于有机质,但有机质具有不同的赋存形式,有机酸具有不同性质,这将影响有机酸与不同赋存有机质的关系,进而影响分离和检测方法。文章在总结前人对有机质赋存形式和有机酸性质等特征的基础上,提出烃源岩中的有机酸并以非单一的形式存在,具有水溶性、脂溶性和难溶性有机酸三种类型,游离有机质中存在水溶性和脂溶性有机酸,而结合有机质中存在水溶性、脂溶性和难溶性有机酸。因此在检测方法上需采取分步分离的方法,且根据有机酸的性质选取合适的检测方法,即水溶性有机酸利用离子色谱检测,索氏抽提得到的脂溶性有机酸利用气相色谱—质谱检测,通过酸解抽提残渣得到的难溶性有机酸利用红外光谱检测,全面系统地认识烃源岩中有机酸含量和类型等特征。这对进一步探讨烃源岩各种类型有机酸特征和演化规律,深化烃源岩有机质生烃以及有机—无机相互作用等机理都具有重要意义。     

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.     

堆积阶地古老滑坡识别方法及其在线状工程地质勘察中的应用

阶地型古老滑坡体形成后,长期受各种营力影响,导致古老滑坡地貌形态破坏严重甚至消失。目前遥感技术和普通工程地质调绘很难发现这些滑坡的存在,给工程建设和后期运营造成较大安全隐患。为准确识别形态特征不明显的古老滑坡体,从阶地物质结构特征演变入手,找到阶地受剪切破坏产生的典型物质结构特征,将地层结构错断、卵砾石异常定向排列、摩擦镜面和泥包粒的眼球构造等作为滑坡准确识别依据。首先采用沿沟谷进行工程地质测绘的纵横交错追踪法确定滑坡体纵向范围和滑面形状,再结合地貌特征推测各级、块滑坡平面范围和分布,最后用点状勘探工程验证和校正推测结论。可将其总结为由"地貌异常、沿沟追踪、面上推断、点状校验"组成的阶地型滑坡识别方法,即物质结构异常推断法。结合线状工程勘察设计各阶段工作特点,提出线状工程前期工作中阶地型滑坡识别步骤,并在临渭高速公路工程建设项目中取得成功应用。     

Runoff quality prediction from small urban catchments using SWMM

The RUNOFF block of EPA's storm water management model (SWMM) was used to simulate the quantity and quality of urban storm water runoff from four relatively small sites (i.e. 5·97–23·56 ha) in South Florida, each with a specific predominant land use (i.e. low density residential, high density residential, highway and commercial). The objectives of the study were to test the applicability of this model in small subtropical urban catchments and provide modellers with a way to select appropriate input parameters to be used in planning studies. A total of 58 storm events, measured by the US Geological Survey (USGS), provided hyetographs, hydrographs and pollutant loadings for biological oxygen demand (BOD₅), total suspended solids (TSS), total Kjeldahl nitrogen (TKN) and lead (Pb), and were used for calibration of the model. Several other catchment characteristics, also measured or estimated by USGS, were used in model input preparation. Application of the model was done using the Green–Ampt equation for infiltration loss computation, a pollutant accumulation equation using a power build-up equation dependent on the number of dry days, and a power wash-off equation dependent on the predicted runoff rate. Calibrated quantity input parameters are presented and compared with suggested values in the literature. The impervious depression storage was generally found to be the most sensitive calibration parameter, followed by the Manning's roughness coefficients of conduit and overland flow, the Green–Ampt infiltration parameters and, finally, the pervious depression storage. Calibrated quality input parameters are presented in the form of regression equations, as a function of rainfall depth and the number of antecedent dry days. A total of 16 independent rainfall events were used for verification of the model, which showed a good comparison with observed data for both hydrographs and pollutant loadings. Average model predictions for the four constituent concentrations from the verification runs also showed good agreement with NURP published values in Florida and US sites. © 1998 John Wiley & Sons, Ltd.     

GPM和TRMM卫星日降水数据在黄河源区的适用性分析

通过评估GPM计划三种日降水产品（IMERG-E、 IMERG-L和IMERG-F）和TRMM卫星、 两种日降水产品（TMPA 3B42和TMPA 3B42RT）在黄河源及其周边区域38个台站的适用性, 探究了五种产品探测精度和海拔高度及雨强的相关关系, 结果表明： 在与实测资料的一致性和偏差方面, GPM卫星产品要全面优于TMPA产品。在TRMM卫星产品中, 3B42产品明显优于3B42RT。五种产品的相关系数均表现出明显的从东南到西北递减的趋势, 均方根误差北部普遍低于南部。IMERG产品的探测率（POD）和探测成功率（CSI）都要普遍高于TMPA产品, 而误报率（FAR）则是TMPA 产品更低, 表现更好。五种产品均在个别台站出现了严重误报的情况, 这些台站主要分布在研究区的西北部。IMERG三种产品对于海拔高度的依赖程度具有很强的一致性, 而3B42RT产品对海拔高度几乎没有依赖。除3B42RT产品外, 其余四种产品的偏差均随雨强的增加而增大。在探测率方面, IMERG产品对小雨、 中雨和大雨的探测能力均优于TMPA产品。     

Optimal instrumentation of uncertain structural systems subject to earthquake ground motions

A criterion is proposed for making decisions regarding the optimal location of a given number of sensors to record the seismic response of a structure for identification purposes. The optimal location of the sensors is selected so that the expected value of a Bayesian loss function, expressed in terms of the Fisher information in the recordings, is minimized. The criterion is applied to the case of multi-degree-of-freedom systems with uncertain structural properties subjected to earthquake ground motions modelled as stationary stochastic processes. The use and capabilities of the criterion are thoroughly illustrated by means of an example. Results are used to assess the influence of record duration, recording noise, and ground motion frequency content and amplitude, on the optimal location of accelerometers as well as on the reduction of prior uncertainty about the structural parameters. © 1998 John Wiley & Sons, Ltd.