浙江省安吉县山区竹类资源综合利用

安吉县竹类资源优势突出 ,使其综合利用已初具规模 .竹业工业已成为新兴工业门类 .竹业经济已是地方经济的一个台柱子 .但竹业结构不合理 ,竹制品雷同性大 ,增值率低 ,资源供需矛盾突出等日益明显 .对今后竹类资源综合利用和持续发展 ,提出了主要思路     

The Zihuatanejo, Mexico, earthquake of 1994 December 10 (M= 6.6): source characteristics and tectonic implications

An analysis of the Zihuatanejo, Mexico, earthquake of 1994 December 10 ( M = 6.6), based on teleseismic and near-source data, shows that it was a normal-faulting, intermediate-depth ( H = 50 ± 5 km) event. It was located about 30 km inland, within the subducted Cocos plate. The preferred fault plane has an azimuth of 130°, a dip of 79° and a rake of −86°. The rupture consisted of two subevents which were separated in time by about 2 s, with the second subevent occurring downdip of the first. The measured stress drop was relatively high, requiring a Δσ of about a kilobar to explain the high-frequency level of the near-source spectra. A rough estimate of the thickness of the seismogenic part of the oceanic lithosphere below Zihuatanejo, based on the depth and the rupture extent of this event, is 40 km.
This event and the Oaxaca earthquake of 1931 January 15 ( M = 7.8) are the two significant normal-faulting, intermediate-depth shocks whose epicentres are closest to the coast. Both of these earthquakes were preceded by several large to great shallow, low-angle thrust earthquakes, occurring updip. The observations in other subduction zones show just the opposite: normal-faulting events precede, not succeed, updip, thrust shocks. Indeed, the thrust events, soon after their occurrence, are expected to cause compression in the slab, thus inhibiting the occurrence of normal-faulting events. To explain the occurrence of the Zihuatanejo earthquake, we note that the Cocos plate, after an initial shallow-angle subduction, unbends and becomes subhorizontal. In the region of the unbending, the bottom of the slab is in horizontal extension. We speculate that the large updip seismic slip during shallow, low-angle thrust events increases the buckling of the slab, resulting in an incremental tensional stress at the bottom of the slab and causing normal-faulting earthquakes. This explanation may also hold for the 1931 Oaxaca event.     

Source investigation of a small event using empirical Green's functions and simulated annealing

We propose a two-step inversion of three-component seismograms that (1) recovers the far-field source time function at each station and (2) estimates the distribution of co-seismic slip on the fault plane for small earthquakes (magnitude 3 to 4). The empirical Green's function (EGF) method consists of finding a small earthquake located near the one we wish to study and then performing a deconvolution to remove the path, site, and instrumental effects from the main-event signal.
The deconvolution between the two earthquakes is an unstable procedure: we have therefore developed a simulated annealing technique to recover a stable and positive source time function (STF) in the time domain at each station with an estimation of uncertainties. Given a good azimuthal coverage, we can obtain information on the directivity effect as well as on the rupture process. We propose an inversion method by simulated annealing using the STF to recover the distribution of slip on the fault plane with a constant rupture-velocity model. This method permits estimation of physical quantities on the fault plane, as well as possible identification of the real fault plane.
We apply this two-step procedure for an event of magnitude 3 recorded in the Gulf of Corinth in August 1991. A nearby event of magnitude 2 provides us with empirical Green's functions for each station. We estimate an active fault area of 0.02 to 0.15 km² and deduce a stress-drop value of 1 to 30 bar and an average slip of 0.1 to 1.6 cm. The selected fault of the main event is in good agreement with the existence of a detachment surface inferred from the tectonics of this half-graben.     

滇、川、黔成矿区的铅锌矿源层（岩）

滇、川、黔铅锌成矿区的矿源层（岩）及其成矿作用，具多矿源层（岩）、多容矿层和多遮挡层共存的特点。矿源层（岩）改造成矿分海西晚期改造生成贫铅锌矿床和燕山期改造生成铅锌富矿床两个旋回，改造成矿的３个主因是：多条继承、发展了基底构造的深一道断层系统，峨眉山玄武岩浆上涌产生的高热能、喷气、矿质和广泛、多中心循环的热卤水，铅锌矿床为沉积─改造─后成成矿。     

分离的大陆板块边缘镁铁－超镁铁岩系Th／Hf—Ta／Hf判别

本文在论述了Ｔｈ／Ｈｆ－Ｔａ／Ｈｆ关系判别岩浆岩源区大地构造环境机理的基础上，根据世界上典型大地构造环境区岩浆岩系的Ｔｈ、Ｔａ、Ｈｆ特征，提出了分离的大陆板块边缘镁铁－超镁铁岩的Ｔｈ／Ｈｆ—Ｔａ／Ｈｆ判别标志：Ｔｈ／Ｔａ＝１．８～４．０，Ｔａ／Ｈｆ＞０．１。     

西菲律宾海沉积物稀土元素地球化学

对取自西菲律宾海区3个沉积物柱样（WP1、WP2和WP40）的32个样品的稀土元素（REE）地球化学行为进行了系统的研究。区内沉积物表现出以下特征：①稀土元素含量及总量（ZREE）较低，WP1、WP2和WP40孔的ΣREE依次为72．91×10－6，54．15×10－6和54．18×10－6，REE在粘土粒级中得到了较大富集；②REE球粒陨石标准化的分布模式曲线表现为负斜率，富集轻稀土，WP1、WP2和WP40孔LREE／HREE比值平均值为37．36，26．33和17．16，页岩标准化曲线大致呈水平；③与球粒陨石和页岩相比，Ce都表现为强烈的亏损；以球粒陨石为标准，WP40孔表现为弱的Eu正异常，其他两孔表现为弱的Eu负异常；以页岩为标准，皆显示Eu正异常；④ΣREE纵向变化曲线与CaCO3旋回曲线有良好的对应关系。上述特征表明：①沉积物的来源复杂，有陆源、火山源、生物源和自生源，在所研究的三个孔中，WP1孔含有较多的陆源物质，WP2和WP40含有较多的火山物质；②被粘土吸附是本区REE重要的存在形式；③沉积物形成环境为氧化条件；④据ΣREE的纵向变化曲线与CaCO3旋回曲线，将本区沉积物自下而上划分为末次冰期亚间冰期沉积、冰期最盛期沉积和全新世沉积。     

Preliminary seismic hazard maps of Slovenia

The preparation of the preliminary seismic hazard maps of the territory of Slovenia has been based on an expansion of the basic approach laid out by Cornell in 1968. Three seismic source models were prepared. Two of them are based mainly on the earthquake catalogue using the Poissonian probability model. A map of seismic energy release and a map of earthquake epicenter density are used to delineate seismic sources in these models. The geometry of the third model which is based on a rough estimate of seismotectonic setting is taken from the probabilistic seismic hazard analysis of a nuclear power plant in Slovenia. Published ground motion attenuation models based on strong motion records of recent strong earthquakes in Italy are used. Test maps for variable and uniform b-values are presented. The computer program, Seisrisk III, developed by the U.S. Geological Survey is used.     

松辽盆地可地浸砂岩型铀矿成矿地质条件

本文重点讨论了松辽盆地的地质背景、铀源条件、铀矿化异常与岩相古地理以及盆地后期改造的关系，介绍了该盆地后期改造的特征、后期改造的动力条件及铀元素的再分配，探讨了铀矿化异常与复合砂体、氧化还原条件及剥蚀面的关系。在此基础上预测了铀成矿远景地区，选出找矿的重点层位。     

三种锰硅酸盐矿物的鉴别及其研究意义

蜡硅锰矿，粒硅锰矿，鉴别，研究意义     

多波资料综合解释方法研究的若干进展

本文较系统地总结了多波层位识别的主要原则和方法；提出了利用井中纵、横波速度求取地层密度、孔隙度的改进方法；研制了以小波分解与重建为基础的沿层分频处理法和高分辨剖面重建方法，提高了薄层识别的横向和纵向分辨率；发展了精度高、误差小计算薄层速度的补层加权法；介绍了各向异性介质参数反演的遗传算法，走时法以及Ｐ－ＳＶ波ＡＶＯ分析等方法；建立了多波解释系统的总体框架。所提方法的有效性和正确性均经过实际地震记录和数值模拟计算的检验，对丰富多波地震资料的解释理论，形成多波解释系统，扩大应用领域，提高应用效果具有重要参考意义。