土地变更影像在棚户区改造资金监管中的应用探索

加快棚户区改造是落实国务院部署的一项政治任务,也是当前及今后一段时期内的最大民生工程。通过利用年度土地变更调查遥感影像对荣成市2015年度棚户区改造新开工项目进行甄别排查,经实地核查后获取不合格项目的具体范围和面积。研究结果表明,利用年度土地变更调查遥感影像可以有效地提高棚户区改造资金监管中对于项目定性效率,并推进资源共享共建,为政府决策提供科学依据。     

基于时序NDVI的昭觉植被覆盖度变化研究

归一化植被指数(NDVI)能精确地反映植被绿度、光合作用强度,在一定程度上反映着植被的演化信息,是评价生态环境状况的重要指标之一。本文利用Landsat TM数据分别对昭觉地区2009年和2014年的NDVI进行计算,并分别利用均值法、像元二分模型及NDVI差值植被指数对研究区域植被覆盖变化进行定量分析,结果表明:昭觉县NDVI均值上升了11.6%,植被覆盖度中极度改善的面积比例约占38%,昭觉县整体NDVI植被覆盖度显著提高,并对其变化原因进行简要分析,为生态环境建设提供决策依据。     

基于UCD数码影像在1∶10000地形图生产中像控点布设方案的研究及精度分析

叙述了在1∶10 000地形图生产中,通过设立试验区,在进行全野外布点的基础上,采用UCD数码影像在无POS辅助和有POS辅助两种情况下,使用自动空中三角测量软件Geolord-AT进行加密的方法。论证了区域网的大小对精度的影响,并通过精度分析,确定像控点布设方法,可为相似航测项目像控点布设方案的确定提供参考。     

基于移动端的“智慧城市与地理国情一张图系统”设计及其应用

系统把智慧城市建设与地理国情应用完美结合,形成时空一体、二三维一体的集成多源数据的一张图;开发IPAD版系统,把PC端的数据处理向移动端适时展现。系统具有国情普查数据的展示和分析、专题地图展示、电子地图、三维模型展示、轨迹记录,以及其他GIS基本功能。在屏幕上任意点取闭合图形,就会实时显示选定图形范围内的国情数据及统计分析数据。辅助决策者又好又快地进行科学决策。     

EMD-Wavelet-ICA耦合模型及其在GPS坐标序列降噪中的应用

在分析比较经验模态分解(EMD)、小波变换(Wavelet)和独立分量分析(ICA)优缺点的基础上,提出一种新的EMD-Wavelet-ICA耦合模型。该模型充分利用了EMD的自适应性,对原始信号进行分解获得不同频率的模态函数(IMF),采用标准化模量的累计均值对IMF进行尺度划分;进而分别采用Wavelet和ICA对高频和低频IMF进行降噪,将降噪后的IMF进行多尺度重构,获得降噪后的信号;采用信噪比、标准差、偏差和相关系数等指标对降噪效果进行评价。仿真数据和GPS坐标序列的处理结果表明:与EMD模型和EMD-ICA模型相比,新模型的标准差、偏差均有不同程度的减小;信噪比和相关系数有一定程度的增大,可以获得更好的降噪效果。     

The internal deformation of the Peridotite Nappe of New Caledonia: A structural study of serpentine-bearing faults and shear zones in the Koniambo Massif

We present a structural analysis of serpentine-bearing faults and shear zones in the Koniambo Massif, one of the klippes of the Peridotite Nappe of New Caledonia. Three structural levels are recognized. The upper level is characterized by a dense network of fractures. Antigorite and polygonal serpentine form slickenfibers along fault planes with distinct kinematics. As a result, the upper level keeps the record of at least two deformation events, the first associated with the growth of antigorite (WNW-ESE extension), the second with the growth of polygonal serpentine (NW–SE compression). The lower level coincides with the ‘serpentine sole’ of the nappe, which consists of massive tectonic breccias overlying a layer of mylonitic serpentinites. The sole records pervasive tangential shear with top-to-SW kinematics and represents a décollement at the base of the nappe. The intermediate level is characterized by the presence of several meters-thick conjugate shear zones accommodating NE–SW shortening. Like the sole, these shear zones involve polygonal serpentine and magnesite as the main syn-kinematic mineral phases. The shear zones likely root into the basal décollement, either along its roof or, occasionally, around its base. Compared to top-to-SW shearing along the sole, the two deformation events recorded in the upper level are older.The three structural levels correlate well with previously recognized spatial variations in the degree of serpentinization. It is therefore tempting to consider that the intensity of serpentinization played a major role in the way deformation has been distributed across the Peridotite Nappe. However, even the least altered peridotites, in the upper level, contain so much serpentine that, according to theoretical and experimental work, they should be nearly as weak as pure serpentinite. Hence, no strong vertical gradient in strength due to variations in the degree of serpentinization is expected within the exposed part of the nappe. Our proposal is that strain localization along the serpentine sole results from the juxtaposition of the nappe, made of weak serpentinized peridotites, against the strong mafic rocks of its substratum. This interpretation is at odds with the intuitive view that would consider the nappe, made of peridotites, as stronger than its basement.     

High precision analysis of an embryonic extensional fault-related fold using 3D orthorectified virtual outcrops: The viewpoint importance in structural geology

Image-based 3D modeling has recently opened the way to the use of virtual outcrop models in geology. An intriguing application of this method involves the production of orthorectified images of outcrops using almost any user-defined point of view, so that photorealistic cross-sections suitable for numerous geological purposes and measurements can be easily generated. These purposes include the accurate quantitative analysis of fault-fold relationships starting from imperfectly oriented and partly inaccessible real outcrops. We applied the method of image-based 3D modeling and orthorectification to a case study from the northern Apennines, Italy, where an incipient extensional fault affecting well-layered limestones is exposed on a 10-m-high barely accessible cliff. Through a few simple steps, we constructed a high-quality image-based 3D model of the outcrop. In the model, we made a series of measurements including fault and bedding attitudes, which allowed us to derive the bedding-fault intersection direction. We then used this direction as viewpoint to obtain a distortion-free photorealistic cross-section, on which we measured bed dips and thicknesses as well as fault stratigraphic separations. These measurements allowed us to identify a slight difference (i.e. only 0.5°) between the hangingwall and footwall cutoff angles. We show that the hangingwall strain required to compensate the upward-decreasing displacement of the fault was accommodated by this 0.5° rotation (i.e. folding) and coeval 0.8% thickening of strata in the hangingwall relatively to footwall strata. This evidence is consistent with trishear fault-propagation folding. Our results emphasize the viewpoint importance in structural geology and therefore the potential of using orthorectified virtual outcrops.     

Low-temperature constraints on the Alpine thermal evolution of the Western Carpathian basement rock complexes

The Cretaceous to Palaeogene Alpine exhumation of previously buried Variscan basements is recorded in the southern portion of the Western Carpathians in the Gemeric and Veporic units. The Meso-Cenozoic collisional processes resulted in basement exhumation of the Tatric Unit from Palaeogene to Neogene times. According to zircon and apatite fission track data, the Gemeric Unit, an uppermost thick-skinned thrust sheet, cooled from depth levels of ∼10 up to 2.5 km (temperature interval of ∼250–60 °C) about 88–64 Ma ago, after the collapse of overlying Meliata-Turňa-Silica Mesozoic accretionary prism. The middle and lower thick-skinned thrust sheets, Veporic and Tatric units, cooled from the depths of ∼10 up to 2.5 km ∼110–40 Ma ago. The process was controlled by unroofing of footwall from beneath the Gemeric Unit. About 50–20 Ma ago, the internal zone of Tatric Unit gradually exhumed to depth of <2 km and some parts of the unit appeared at the surface level. However, the external zone of Tatric Unit was buried beneath the Eocene to Lower Miocene sedimentary successions and exhumed to the subsurface level at ∼21–8 Ma ago, as a result of oblique collision of the Western Carpathians with the European Platform.     

泡沫塑料吸附分离富集-电感耦合等离子体质谱法测定稀土矿石中的镓

采用电感耦合等离子体质谱法(ICP-MS)测定稀土矿石中的镓,高含量的稀土元素会造成严重的质谱干扰。本文采用聚氨酯泡沫塑料在6 mol/L盐酸介质中吸附样品溶液中的镓后,以0.5 mol/L氯化铵水浴加热解脱30 min,镓的吸附-解脱效率超过99%,稀土元素等干扰物质基本不进入解脱液中,即在富集镓的同时实现了镓与基体元素的高效分离,降低了质谱干扰。本方法检出限低(0.022μg/g),经土壤及水系沉积物标准物质验证,镓的测定值与标准值吻合(绝对偏差为0.38%~4.70%),实际稀土矿石样品的加标回收率为94.1%~100.6%,精密度(RSD)低于4%(n=12),可应用于分析一般地质样品以及稀土矿石中的镓。     

无内标-多外标校正激光剥蚀等离子体质谱法测定磁铁矿微量元素组成

激光剥蚀电感耦合等离子体质谱(LA-ICP-MS)常用于磁铁矿原位微量元素分析,按照校正策略不同,主要分为内标法和无内标法。内标法需要用电子探针(EMPA)预先测定磁铁矿中内标元素Fe的含量,过程较繁琐,且待测元素含量会受到内标元素含量测定的影响。本文采用铁含量较高的玄武质玻璃BCR-2G、BIR-1G、BHVO-2G和GSE-1G作为外标,避免了内标元素含量的测定,建立了无内标-多外标校正LA-ICP-MS测定磁铁矿微量元素组成的分析方法。利用该方法测定了科马提岩玻璃GOR-128g和自然岩浆磁铁矿BC 28的微量元素组成以评估方法的可靠性。结果表明,科马提岩玻璃的测定结果与推荐值及前人内标法的测定值一致,多数元素的相对标准偏差RSD5%;自然岩浆磁铁矿的测定结果与推荐值相比,多数元素的RSD7%,低于前人内标法的RSD(15%)。由此说明无内标-多外标法可以实现富铁硅酸岩或磁铁矿微量元素含量的准确校正,克服了基体效应的影响。因此,无内标-多外标法是一种原位测定磁铁矿微量元素含量的快速、准确方法,具有一定的应用潜力。