东海陆架北部表层细粒级沉积物的级配及意义

本文依据东海陆架北部 2 3个表层沉积物样品的粒度分析资料 ,就东海陆架北部表层细粒级沉积物的级配及意义进行了研究。结果表明 ,研究区表层沉积物中细粒级部分以 <0 .0 16 mm为优势粒级 ,可占到总细粒级沉积物的 75 %以上。济州岛西南泥质区以细于 0 .0 0 8mm粒级的沉积物占据优势 ,长江口泥质区则以 <0 .0 16 mm粒级的沉积物为主 ,两泥质区细粒级沉积物的级配很不相同     

Bacterial sulphate reduction in sediments of a european salt marsh: Acid-volatile and tin-reducible products

The products of ³⁵S-sulphate reduction by sedimentary bacteria were measured at two sites in a salt marsh on the east coast of England. Non-acid-volatile products were measured, after acid-volatile sulphide was removed, by their reduction to sulphide by digestion with tin. The proportion of the sulphate reduced to tin-reducible products varied between 25% in a salt marsh pan and 61% in creek sediment, over a 0–25 cm depth profile. There were also variations with depth at each site in the proportions of sulphate reduced to tin-reducible products. Further examination revealed differences in the proportions of sulphate which were reduced to free sulphide, acid-volatile sulphide, sulphur or pyrite at the two sites. The data suggest that previous work which did not measure non-acid-volatile products underestimated sulphate reduction rates by three-fold in the creek site, but by only one third in the pan.     

冲绳海槽北部表层沉积物中的钙质超微化石及其环境特征

为探讨冲绳海槽表层沉积物中钙质超微化石的分布规律及其影响因素 ,对海槽北部槽坡区 ( 2 9°5 8.33′— 31°31 .2 3′N ,1 2 7°39.5 5′— 1 2 8°5 9.61′E) 34个表层样品进行了分析和研究。共发现 35种钙质超微化石 ,其中优势种为Gephyrocapsaoceanica、Emilianiahuxleyi和Florisphaeraprofun da ;G .oceanica、E .huxleyi等的百分含量变化和特征属种U .tenuis的出现 ,表明该区钙质超微化石组合面貌与东海外陆架相似 ,和东海及南海都属于北太平洋中央水团组合。G .oceanica的含量与海水营养盐存在一定的关系 ,但两者之间并不存在明显的正相关性 ;暖水分子U .irregularis、U .sibogae和O .fragilis的较高含量和冷水分子G .caribbeanica和Calcidiscusleptoporus的较低含量 ,进一步反映该区钙质超微化石的分布受到黑潮及对马暖流的影响 ,其中温度、盐度和表层海水结构性质 ,如海水透明度等因素可能为主要控制因素。     

Nitrogen forms and decomposition of organic carbon in the southern Bohai Sea core sediments

Study on form characteristics of nitrogen in marine sediments is the primary method to research its biogeochemical cycling and nitrogen form characteristics in core sediments can reflect the process and results of early diagenesis in a certain degree. In this paper, Sequential extraction process in natural grain size was used for studying the existent forms of nitrogen in five core sediments of the southern Bohai Sea for the first time. Nitrogen was divided into two parts -transferable and fixed based on whether it could be extracted by the reagent. Distributions and early diagenesis of transferable nitrogen forms in the southern Bohai Sea were researched integratedly. Results indicate that IEF - N and OSF-N are predominant forms in transferable part in the studied core sediments. Contents of different nitrogen forms vary differently with depth, and have different diagenesis process. Decomposition constant of organic nitrogen (ON) and OC are about 15.51 × 10~(-3)a~(-1)and 4.79× 10~(-3)a~(-1) respective     

The impact of shrimp trawling and associated sediment resuspension in mud dominated, shallow estuaries

To address the relative importance of shrimp trawling on seabed resuspension and bottom characteristics in shallow estuaries, a series of disturbance and monitoring experiments were conducted at a bay bottom mud site (2.5 m depth) in Galveston Bay, Texas in July 1998 and May 1999. Based on pre- and post-trawl sediment profiles of ⁷Be; pore water dissolved oxygen and sulfide concentration; and bulk sediment properties, it was estimated that the trawl rig, including the net, trawl doors, and “tickler chain,” excavate the seabed to a maximum depth of approximately 1.5 cm, with most areas displaying considerably less disturbance. Water column profile data in the turbid plume left by the trawl in these underconsolidated muds (85–90% porosity; <0.25 kPa undrained shear strength) demonstrate that suspended sediment inventories of up to 85–90 mg/cm² are produced immediately behind the trawl net; an order of magnitude higher than pre-trawl inventories and comparable to those observed during a 9–10 m/s wind event at the study site. Plume settling and dispersion caused suspended sediment inventories to return to pre-trawl values about 14 min after trawl passage in two separate experiments, indicating particles re-settle primarily as flocs before they can be widely dispersed by local currents. As a result of the passage of the trawl rig across the seabed, shear strength of the sediment surface showed no significant increase, suggesting that bed armoring is not taking place and the trawled areas will not show an increase in critical shear stress.     

南黄海及相邻陆区松散沉积层磁性地层的研究

本文通过研究区5个钻孔松散沉积岩心磁性地层的划分对比,获知布容与松山极性带的界线,南黄海和陆区北部位于80.0—99.5m。陆区的南部此界线于270.4m深处。松山和高斯极性带的界线,海区未揭露到,其沉积起始时间都小于1.7Ma。而陆区的南、北部分别位于117m和328.2m。高斯和吉尔伯特极性带的界线,陆区北部为140m,而南部区为460.15m。沉积起始时间为3.4Ma。吉尔伯特底界仅北部陆区所揭示,为190.5m。松散沉积层与下伏白垩纪(?)石灰岩接触面位于400.35m,沉积起始时间约17.0Ma。     

湄州湾沉积物地球化学特征

根据湄州湾表层沉积物70个样品18个化学成分的分析结果,得出:本海区沉积物属于海相陆源物,其中细颗粒主要来自台湾海峡,粗颗粒来自当地陆域;化学成分含量按聚类分析,可归为三组:粘土矿物组、碳酸盐组和分散组,微量元素Zn,Cr,Be,Cu和Sr的含量与地壳及台湾海峡相似,但低于胶州湾,说明该海区污染很少。     

Geochemistry and palaeo-oceanography of metalliferous and pelagic sediments from the Late Cretaceous Oman ophiolite

Metalliferous and pelagic sediments are exposed within and above the extrusive successions of the Upper Cretaceous Oman ophiolite which, on the basis of mostly geochemical evidence, is believed to have formed in an incipient marginal basin setting located above a NE-dipping subduction zone. The ophiolitic extrusives document various volcano-tectonic settings which include the axial zones of a spreading ridge, fault-controlled seamounts and off-axis volcanic edifices. Most of the Fe, Mn and trace metal-enriched sediments studied are interpreted as precipitates formed by oxidation of solutions derived from high-temperature sulphide-precipitating vents. The trace element content (e.g. REE and Sr) was largely scavenged from seawater. The sediments are similar to the dispersed metalliferous sediments on the flanks of modern spreading ridges, and the ‘basal’ sediments of DSDP wells and of other ophiolite complexes (e.g. Troodos, Cyprus).Distinctive mound structures located low in the lavas are attributed to percolation of sulphide-rich solutions into already deposited metalliferous oxide sediments. The resulting iron-silica rock was probably originally precipitated as ferruginous silicates.Major massive sulphides formed off-axis at the base of intermediate-basic edifices of volcanic arc affinities. Fe, Mn and trace metal enrichment in the sediment cover of a flat-topped seamount of axial lavas is interpreted as a dispersion halo around the largest massive sulphide orebody which is situated 5 km away (Lasail). Small massive sulphide bodies are common in the axial lavas particularly along major seafloor fault zones. The metalliferous sediments, locally precipitated near these vents, are ferromanganiferous, but trace metal-depleted.The metalliferous and pelagic sediment cover of the extrusive successions, generally, documents waning hydrothermal input after volcanism ended in the area.A model is discussed in which the ophiolite was created at a spreading axis above a subduction zone dipping away from the Arabian continental margin. With progressive subduction this crust approached the margin. Initially, calcareous sediment accumulated above the calcite compensation depth (CCD), but then non-calcareous radiolarites were deposited as the ophiolitic crust approached the continental margin where the CCD was higher and marginal upwelling possibly enhanced productivity. As the edge of the Arabian continental margin entered the trench, the over-riding ophiolite was regionally uplifted allowing short-lived chalk accumulation above the CCD. This was followed by volcaniclastic deposition related to the tectonic emplacement.     

Geoacoustic Characterisation of Fine-grained Sediments using Single and Multiple Reflection Data

Fine-grained sediments commonly occur in areas of the continental shelf where wave and current energy are weak. Bulk density, compressional wave speed and attenuation are fundamental physical properties of these sediments required for predicting the response of the seabed for diverse branches of marine science. The traditional coring approach is time and labor-intensive, with large uncertainties associated with sediment disturbance in the sampling phase. Acoustic methods offer the advantages of remote sensing, i.e., sampling the sediment structure without mechanical disturbance and a significantly larger seabed coverage rate per unit time. Two different acoustic methods are described: one using short-range single-bounce interactions with the seabed, and the second using long-range modal propagation to infer the sediment properties. The relative strengths and sensitivities of each approach are explored through simulations guided by experience with measured data.     

A Preliminary Study of Shear Wave in Seafloor Surface Sediments

This article preliminarily reports and analyses the transmission characteristics and behaviors of shear wave in the offshore seafloor surface sediments in China, discusses the relationships between the physical and mechanical features of the shear wave and the compression wave, and compares the testing results with that of Hamilton and Chen et al. The result shows that the shear wave can be tested if the seafloor surface sediment has tangent modulus. The shear wave velocity ranges from 50-600 m/s and the measuring frequency from 50-200 kHz. The sound velocity rate of shear wave and compression wave can be used to appraise the stress-strain feature of seafloor surface sediments. This study provides a basis for further describing and appraising the seafloor sedimentary acoustic-mechanical feature and building a geological-acoustic model on China's offshore sea area.