多级支挡结构地震主动土压力的极限分析

多级组合支挡结构形式在高边坡防护工程中得到了广泛采用,但现有研究却较少涉及这种支挡结构形式的地震土压力计算问题。应用拟静力法和塑性极限分析上限定理,并且基于强度折减技术,推导了重力式挡墙与两级锚杆挡墙组合支挡结构形式的地震主动土压力及其系数的上限解。该上限解考虑了水平和竖向地震系数、墙背倾角、坡面形式及多级支护方式、土体黏聚力、土体与墙背的黏附力等诸多因素。二级锚杆挡墙实例分析表明：静力条件下主动土压力计算值与现有相关方法的计算结果一致,土的抗剪强度折减系数、上挡墙锚杆轴力等参数,对下挡墙地震主动土压力影响显著。二级组合支挡结构地震主动土压力影响参数敏感性分析表明：水平地震系数以及重力式挡墙墙高和倾角的敏感性较大,上挡墙锚杆的轴力和倾角等参数的敏感性相对较小     

基于波场垂向和水平方向外推的高陡构造偏移

常规的单程波波动方程偏移成像方法对大角度的高陡构造偏移成像存在内在的限制.根据波动方程在各个空间方向的数学特性和高陡构造反射地震波的传播特征,通过把地震波分解为垂向的上下行波、水平方向的前后行波和左右行波,提出基于波场垂向外推和水平方向外推相结合的单程波波动方程高陡构造偏移成像方法,即用波场垂向外推的单程波波动方程偏移成像方法解决中低角度平缓构造的偏移成像,用波场水平方向外推的单程波波动方程偏移成像方法解决中高角度陡倾构造的偏移成像.这种基于波场垂向和水平方向外推相结合的高陡构造偏移成像方法是常规单程波波动方程叠前深度偏移成像方法的补充和改进,它相对基于全波方程的逆时偏移具有计算效率上的优势.     

Inelastic displacement demands in steel structures and their relationship with earthquake frequency content parameters

This paper deals with the estimation of peak inelastic displacements of SDOF systems, representative of typical steel structures, under constant relative strength scenarios. Mean inelastic deformation demands on bilinear systems (simulating moment resisting frames) are considered as the basis for comparative purposes. Additional SDOF models representing partially‐restrained and concentrically‐braced (CB) frames are introduced and employed to assess the influence of different force‐displacement relationships on peak inelastic displacement ratios. The studies presented in this paper illustrate that the ratio between the overall yield strength and the strength during pinching intervals is the main factor governing the inelastic deformations of partially‐restrained models and leading to significant differences when compared with predictions based on bilinear structures, especially in the short‐period range. It is also shown that the response of CB systems can differ significantly from other pinching models when subjected to low or moderate levels of seismic demand, highlighting the necessity of employing dedicated models for studying the response of CB structures. Particular attention is also given to the influence of a number of scalar parameters that characterise the frequency content of the ground motion on the estimated peak displacement ratios. The relative merits of using the average spectral period T_aver, mean period T_m, predominant period T_g, characteristic period T_c and smoothed spectral predominant period T_o of the earthquake ground motion, are assessed. This paper demonstrates that the predominant period, defined as the period at which the input energy is maximum throughout the period range, is the most suitable frequency content scalar parameter for reducing the variability in displacement estimations. Finally, noniterative equivalent linearisation expressions based on the secant period and equivalent damping ratios are presented and verified for the prediction of peak deformation demands in steel structures. Copyright © 2011 John Wiley & Sons, Ltd.     

Nonlinear seismic behaviour of wall-frame dual systems accounting for soil–structure interaction

The aim of this paper is to study the effects of soil–structure interaction on the seismic response of coupled wall-frame structures on pile foundations designed according to modern seismic provisions. The analysis methodology based on the substructure method is recalled focusing on the modelling of pile group foundations. The nonlinear inertial interaction analysis is performed in the time domain by using a finite element model of the superstructure. Suitable lumped parameter models are implemented to reproduce the frequency-dependent compliance of the soil-foundation systems. The effects of soil–structure interaction are evaluated by considering a realistic case study consisting of a 6-storey 4-bay wall-frame structure founded on piles. Different two-layered soil deposits are investigated by varying the layer thicknesses and properties. Artificial earthquakes are employed to simulate the earthquake input. Comparisons of the results obtained considering compliant base and fixed base models are presented by addressing the effects of soil–structure interaction on displacements, base shears, and ductility demand. The evolution of dissipative mechanisms and the relevant redistribution of shear between the wall and the frame are investigated by considering earthquakes with increasing intensity. Effects on the foundations are also shown by pointing out the importance of both kinematic and inertial interaction. Finally, the response of the structure to some real near-fault records is studied. Copyright © 2012 John Wiley & Sons, Ltd.     

Performance of masonry enclosure walls: lessons learned from recent earthquakes

This paper discusses the issue of performance requirements and construction criteria for masonry enclosure and infill walls.Vertical building enclosures in European countries are very often constituted by non-load-bearing masonry walls, using horizontally perforated clay bricks.These walls are generally supported and confined by a reinforced concrete frame structure of columns and beams/slabs.Since these walls are commonly considered to be nonstructural elements and their influence on the structural response is ignored,their consideration in the design of structures as well as their connection to the adjacent structural elements is frequently negligent or insufficiently detailed.As a consequence,nonstructural elements,as for wall enclosures,are relatively sensitive to drift and acceleration demands when buildings are subjected to seismic actions. Many international standards and technical documents stress the need for design acceptability criteria for nonstructural elements,however they do not specifically indicate how to prevent collapse and severe cracking,and how to enhance the overall stability in the case of moderate to high seismic loading.Furthermore,a review of appropriate measures to improve enclosure wall performance and both in-plane and out-of-plane integrity under seismic actions is addressed.     

波浪与多孔介质结构相互作用SPH模拟

应用经CSPM法和黎曼解修正后的光滑粒子流体动力学(SPH)方法,建立了主动吸收无反射数值波浪水槽,研究波浪作用下多孔介质结构的水动力特性。流体运动控制方程采用N-S方程,多孔渗水结构内流体的运动控制方程考虑渗流力的影响。数值计算结果给出了水槽内不同位置测点的波面历时曲线和越浪量随时间变化曲线,并同试验结果和Philip Liu的数值计算结果进行了比较。并对一个波浪周期内斜坡堤多孔介质结构内外的速度场和压力分布进行了讨论分析。计算分析表明,数值计算波面较Philip Liu的计算结果与试验结果吻合更好。说明应用SPH方法建立的二维数学模型能够较好地模拟破碎波在多孔渗水斜坡上的爬坡和越浪。     

核幔成矿物质与地幔热柱多级演化成矿

研究认为金等成矿物质主要来自核-幔源区,以气态-气液混合态、含矿流体的形式,通过地幔热柱→地幔亚热柱→幔枝构造→有利构造扩容带,迁移到幔枝构造外围的韧脆性剪切带、侵入岩体的内、外接触带、各种脉岩与围岩的接触带等有利部位集聚成矿,并构成矿田→矿床→矿体(脉)的有序排列组合,表现出不同的矿床类型。因此,应侧重研究构造成矿控矿作用,以指导新一轮地质找矿和矿产资源评价。文中还举例分析了胶西北焦家断裂与三山岛断裂的交切关系及其控矿作用。     

特殊构造条件下煤炭综放开采顶板涌水机理及防治

煤炭资源开采中采场顶板水水害是威胁工作面安全生产的灾害之一。以兖州矿区东滩煤矿综放开采14310工作面在回采过程中的涌水情况为例,在分析地质和水文地质条件基础上,从构造控水机理出发,分析了工作面特殊构造条件下顶板砂岩含水层的赋存规律和涌水规律,实施了14310工作面安全回采的探、放水工程、泄水巷工程和完善排水系统等相关水害综合防治方法,最终实现了工作面的安全回采。      

水利工程震害中土工结构低应力破坏实例分析

实际工程活动与低应力下土石料工程性质密切相关。总结了与低应力条件相关的工程活动,在总结分析以往地震中堤防和坝体滑坡案例的基础上,指出滑坡深度通常小于7 m,其上覆有效应力大多小于100 kPa。在对106组地震液化数据资料分析的基础上,指出地基液化大多发生在上覆有效应力低于100 kPa的低应力条件下。在目前的研究中,通常只关注中、高应力条件下土石料的工程性质。在应用中低应力区的土石料计算参数取值通常与中、高应力条件下获得的强度和变形参数一致,而高、低应力条件下土石料的强度和变形特性是不同的,这种计算参数取值方法的适用性存在疑虑。因此,研究低应力条件下土石料的工程性质,探讨数值计算中低应力条件下土石料计算参数的取值方法,具有重要的工程意义和科学价值。     

中国大陆克拉通地体地壳密度结构特征

本文根据重力场小波变换的尺度—源深度转换律,进行地面重力异常场多尺度分解,取得了反映中国地壳不同埋藏深度的小波细节,揭示了克拉通地体地壳的密度结构。中国大陆克拉通地体地壳密度结构的总体特点是:地壳密度总体偏高,尤其是在经历了岩浆底垫作用后,下地壳形成了粗大的和高密度的壳根,而造山带的下地壳通常有低密度的山根。现今的克拉通地体有几个演化的阶段,由陆地核演化为一定规模的克拉通地体可能经历漫长的时间。不同演化的阶段地体的物理性质有明显的变化,要赋予大地构造单元以演化阶段的内涵,才能准确理解它们的行为和属性。同时,根据地壳密度结构成像的结果,可以了解克拉通地体的成熟度。中国大陆克拉通地体或者内部地块的地壳密度结构大致可以分为三类。上中下地壳密度都偏高的属于第一类,称为典型的克拉通,塔里木、阿拉善、华北东部、上中扬子等属于第一类。第二类克拉通地体上地壳密度偏低,而下地壳密度偏高,称为弱结晶基底的克拉通,鄂尔多斯和佳木斯属于第二类。第三类上中地壳密度偏高,而下地壳密度偏低,称为无壳根的克拉通残片,柴达木和准噶尔盆地属于此类,它们可能是古克拉通地体的残片。