Stress Sharing Behavior and Its Mechanism during Consolidation Process in Composite Ground Improved by Sand Compaction Piles with Low Replacement Area Ratio

In order to accurately design a sand compaction pile (SCP) with low replacement area ratio, it is important to understand the mechanical interaction between the sand pile and clay ground and its mechanism during consolidation process in composite ground. In this article, therefore, a series of numerical analyses on composite ground improved by SCP with low replacement area ratio were carried out. The applicability of numerical analyses, in which an elasto-viscoplastic consolidation finite element method was applied, were confirmed by comparing the results obtained from a series of laboratory model tests with the composite ground improved by SCP. Through the results of the numerical analyses, mechanical behavior of the sand pile and clay in composite ground during consolidation is elucidated, together with a stress sharing mechanism between sand pile and clay.     

Discussion: A review on the behaviour of helical piles as a potential offshore foundation system

Abstract

Helical piles have emerged as an attractive foundation system for offshore applications with renewed interest from the offshore community. Significant research gap currently exists in transferring this technology offshore and this paper discusses how existing and emerging knowledge can be successfully used to bridge some of the gaps. We focus on the Coupled Eulerian Lagrangian (CEL) large deformation finite element (LDFE) modelling technique that is commercially available and can be used to model the three-dimensional installation process with consideration of strain rate and softening effects in soft offshore clays. A helical pile of L?=?7.5?m long is modelled with one or two large-diameter helices (D?=?2?m) attached to a central shaft of d?=?0.5?m in diameter.The net effect of strain rate and softening is to increase the installation torque. The measured torque is within the range of 200–400?kN.m for the offshore clay and the pile geometry studied. Additional helices increase the uplift force but to a lesser degree than that of the measured torque. Remoulding induced strength reduction is found to be within the range of 25–33% of the intact clay strength. Issues of extracting and reusing offshore helical pile foundations are discussed.     

The Working Mechanism and An Analytic Method of the Deep Embedded Large Cylinder Structure

The large cylinder is a new-type structure that has been applied to harbor and offshore engineering. An analytic method of the relationship between loads and the structure displacement is developed based on the failure mode of deep embedded large cylinder structures. It can be used to calculate directly the soil resistance and the ultirnate bearing capacity of the structure under usage. A new criterion of the large cylinder structure, which discriminates the deep embedded cylinder from the shallow embedded cylinder, is defined. Model tests prove that the proposed method is feasible for the analysis of deep embedded large cylinder structures.     

一种具有巨大经济价值的海洋矿产资源--砂石土

砂石土指第四纪堆积的泥、土、砂，为一种极为重要的资源。我国具有丰富的海洋砂石土资源。以广东海域为例，通过资料的综合分析，探讨了海岸砂石土资源的重要作用，并提出其开采应注意的问题。     

桩式离岸堤保滩促淤工程消浪效果试验研究

在上海奉贤南北港保滩促淤工程中，采用了一种新型结构型式－桩式离岸堤，并通过物理模式试验进行了桩式离岸堤消浪效果研究。针对离岸堤通常建于近岸水区破波带的特点，重点研究水深，堤高以及堤身结构对波浪衰减的影响，同时对桩式离岸堤堤后水域的波浪底流速 分析探讨。研究结果表明，桩式离岸堤不仅具有良好的消浪效果。而且可在较大范围内改变波态，即由引起水体剧烈紊动的破波转变为浅水推进波，从而有效地改善海滩上的动力条件，促进海滩免受侵蚀，是一种具有广泛应用前景和新型保滩促淤结构。     

Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.     

Stress and deformation of offshore piles under structural and wave loading

Various offshore structures, especially large structures such as Tension Leg Platforms (TLP), are usually supported by concrete piles as the foundation elements. The stress distribution within such a large structure is a dominant factor in the design procedure of an offshore pile. To provide a more accurate and effective design for offshore foundation systems under axial and lateral wave loads, a finite element model is employed herein to determine the stresses and displacements in a concrete pile under similar loading conditions. A parametric study is also performed to examine the effects of the stress distribution due to the changing loading conditions.     

山东全新世滨海软土与工程地质灾害的研究

山东全新世滨海软土分布在海湾、泻湖、河口区，厚度１－１０ｍ。海湾、泻湖软土为淤泥、淤泥质土，陆源物质供应丰富的浅水区，软土颗粒偏粗，强度相对较高，触变性对建筑物危害性大，陆源物质供应少的深水区，软土颗粒偏细，低强度、高压缩性、沉降变形大和蠕变性是危及建筑物稳定的主要因素。海湾、泻湖软土位于地下水位下，具低透水性，掩埋后短期不易排水固结，软土下为强度较高的冲积物，对一般建筑物，利用强夯、粉喷搅拌桩、     

软土海岸地区测量控制点标志的设立

分析了软土、湿地、滩涂地区特殊地理环境对测量控制点的影响;主要探讨了此类地区控制点标志的设计、施工。借助于建筑桩基技术和道桥施工方法,首次成功实现了某三角洲湿地滩涂地区统一布网。几年来,结合滩涂湿地测量、海岸防护和滩涂开发工程对部分控制点进行了初步检测,给出了部分检测数据。应用和检测均表明:桩基标石可较好地解决软土、湿地、滩涂地区控制点布设难题,显著提高软土海岸地区测量控制点标志的稳固性,从而延长控制网的可使用期。     

Non-Simultaneous Failure of Ice in Front of Multi-Leg Structures

Because the multi-leg jacket structure is the major type of offshore structures in the Bohai Sea, the study of non-si-multaneous failure of i鏴 on multi-leg structures is important. However, the non-simultaneous failure has not been consid-ered in engineering design until now, obviously resulting in costly design and notable waste. To resolve this problem, this paper, by means of analysis of experimental data, calculates the coefficient of the non-simultaneous failure for the double-pile structure, the square four-leg structure, the single-line multi-pile structure, and the conical structure, respectively, and provides some reference criteria for engineering design.