长江口南汇湿地植被的光谱吸收特征研究

植被的光谱吸收特征与植被生长状况密切相关,同时也受土壤湿度等外界因素影响。本文以长江口南汇湿地典型植被芦苇、互花米草和海三棱藨草为研究对象,在计算其光谱特征参数的基础上,分析了这3种植被的光谱吸收特征形变PSDI值。最后结合实测的土壤湿度,分析了3种植被的PSDI值和土壤湿度的相关性。研究结果发现:互花米草的PSDI值最大,海三棱藨草的PSDI值最小,芦苇介于两者之间,表明互花米草受外界的环境影响较大;互花米草的PSDI值与土壤湿度的相关性最大,芦苇的PSDI值与土壤湿度的相关性最小,海三棱藨草介于两者之间,表明互花米草适应湿地环境能力较强。     

气候变暖与海平面上升

本文通过大量实际资料分析认为,现代全球变暖与海平面上升,源于200多年前小冰期冷峰出现后的气候返暖、海平面回升过程演变的结果。近30年的世界海平面上升的速率,有着上世纪80、90年代和本世纪前10年世界平均气温每10年以0．2F°（0．11℃）为梯度的连续抬升为背景。在此以CO。含量为气候指标,划分出了公元200年以来的八个暖段（暖期）。若按冷暖极值距200年或250年计算,则由目前正在发展的暖期,将在公元2050年或2100年前后结束,而后开始降温。作者依据最近30年同一时段国内外验潮资料计算获得的绝对海平面升降速率为＋1．52±0．27mm／a及相对海平面升降速率为＋1．39±0．26mm/a。按照2010年坎昆气候大会决议要求,在对前人有关研究成果进行考量时,对将来的2050和2100年世界海平面预测及我国地面沉降较明显的沿海城市如天津、上海、厦门、海口等相对海平面升降值,进行了测算与评估。     

GPS与数字水准仪相结合进行三维控制网的布设

通过三维控制网的实际布设,对GPS平面控制网的精度和数字水准仪布设的高程控制网的精度进行了分析探讨,并对二者如何更加有效的结合提出了几点有益的见解。     

同步改正法平均海面传递应用于海南岛礁测绘的探讨

同步改正法因其特点和优势被广泛应用于平均海面传递,文中从平均海面的理论定义和实际计算两方面出发,对同步改正平均海面传递法原理进行了论述。利用海南岛周边的长期验潮站数据,按单站传递和多站组网传递分别分析了同步改正平均海面传递的规律。结果表明,单站传递同步观测10 d能满足岛礁测绘对垂直基准面精度的要求,采用多站组网传递能较明显地减少同步时长较短时的极限误差。当采用多站组网平均海面传递同步观测5 d,其极限误差可达10 cm以内,建议在同步观测时间有限时采用该方法。结合海南岛验潮站和岛礁分布情况,同步改正平均海面传递法应用于海南岛礁测绘是可行的。     

海上风电升压站平台高程确定标准的合理性研究

为保证海上风电升压电站建设的经济合理与安全可靠,合理确定海上风电升压电站平台高程十分必要。文中从波浪与潮位的遭遇组合、最大波高取值与现行相关标准的比较、最大波峰高度计算的合理性等方面,全面分析了确定海上风电升压站平台高程各组成项取值标准的合理性,研究认为现行标准明显偏高。建议海上升压站平台底部高程按"100年一遇极端高水位+重现期50年波列累积频率1%的最大波峰高度+安全超高"确定。结合工程实例计算分析,按本文建议可使海上升压站平台高程明显降低,从而节省工程造价,还可减轻升压站工程对周边风机的遮蔽影响,以达到多发电量的效果。     

中国沿海增减水的变化特征及与海平面变化的关系

本文通过对中国沿海25个观测站水位资料的分析,初步探讨了中国沿海1980-2012年增减水的变化特征及与海平面变化的关系。结果表明:（1）中国沿海增减水的季节变化特征明显,相邻站由于受到的气象状况相同,其沿海增减水变化的过程相近,但是变化幅度存在较大差异。从空间分布看,沿海增减水的变化幅度呈现中间大南北小的区域特征,自长江口至广东沿海,增减水的年变化幅度最大,年变幅平均为5.0~7.5 cm;南海周边及北部湾沿海,增减水的年变化幅度次之,年变幅平均为4.0~5.5 cm;自渤海至黄海沿海,增减水的年变化幅度较小,年变幅平均为3.3~3.5 cm。（2）从时间变化看,1980-2012年中国沿海年平均增减水长期基本没有趋势性变化,但明显存在2至5年的周期性变化信号,该信号的震荡幅度为0.1 cm。经过高频滤波后,对沿海月平均增减水序列与Niño3.4指数进行相关性分析,相关系数为-0.5,该相关系数通过了显著性检验,说明中国沿海的增减水变化与ENSO事件呈现负相关关系。（3）中国沿海增减水的长期变化及空间分布特征均与海平面变化不同。1980-2012年,中国沿海海平面的上升速率为2.9 mm/a,而增减水长期基本无趋势性变化;另外,其季节变化与海平面的季节变化从时间和区域上均不存在一致性。（4）但是,短期海平面的变化与增减水有关,并且增减水对短期海平面的贡献根据其具体情况而定,增水幅度大且持续时间长的过程对短期海平面有抬升作用,其贡献率最大可达65%;反之,减水幅度大且持续时间长的过程则对短期海平面有降低的作用。     

潮流界以下河段航道整治水位确定方法研究——以长江江阴以下河段为例

在总结分析现有整治水位确定方法的基础上,根据潮流界以下河段的水沙运动特性,本文提出一种基于输沙能力的航道整治水位确定方法。考虑上游来水、下游潮汐为独立事件,统计潮流界以下河段上游来水、下游潮汐不同等级组合出现的频率,采用数学模型计算相应组合下河段沿程的潮位、流速过程,以流速四次方代表水流的输沙能力,统计不同潮位等级对应的综合净输沙能力,确定最大综合净输沙能力对应的水位为(最优)航道整治水位。以长江下游白茆沙水道和福姜沙水道为例,计算了所在河段的航道整治水位,并探讨了起动流速对整治水位计算的影响和最高整治水位概念对工程的意义。     

Investigation on the Effect of Geometrical and Geotechnical Parameters on Elongated Offshore Piles Using Fuzzy Inference Systems

Among numerous offshore structures used in oil extraction, jacket platforms are still the most favorable ones in shallow waters. In such structures, log piles are used to pin the substructure of the platform to the seabed. The pile’s geometrical and geotechnical properties are considered as the main parameters in designing these structures. In this study, ANSYS was used as the FE modeling software to study the geometrical and geotechnical properties of the offshore piles and their effects on supporting jacket platforms. For this purpose, the FE analysis has been done to provide the preliminary data for the fuzzy-logic post-process. The resulting data were implemented to create Fuzzy Inference System (FIS) classifications. The resultant data of the sensitivity analysis suggested that the orientation degree is the main factor in the pile’s geometrical behavior because piles which had the optimal operational degree of about 5° are more sustained. Finally, the results showed that the related fuzzified data supported the FE model and provided an insight for extended offshore pile designs.     

Deltaic soil behavior classification using CPTu records—Proposed approach and applied to fifty-four case histories

For the past four decades, the CPT has played a key role in onshore and offshore soil investigations. One of the main applications of cone penetration test (CPT) is the soil behavioral classification. Most of the developed methods for soil identification using CPT and CPTu (piezocone) data are well categorized for common soils, such as clays, silts, and sands. Soils with low resistance or more compressibility generally involve problems in geotechnical engineering practice and construction projects. Consequently, these unusual deposits require further evaluation and more detailed data. Five major groups of problematic soils including: liquefiable, sensitive, peaty, collapsible, and expansive soils have been considered in this study. One hundred and forty CPT and CPTu test records were collected from fifteen countries. Sixty-one of the records are related to difficult soils. A brief comparison is performed for currently used soil behavioral classification charts, such as by Campanella et al. (1985 Campanella, R. G., P. K. Robertson, D. Gillespie, and J. Greig. 1985. Recent developments in in-situ testing of soils. Proceedings of 11th International Conference on Soil Mechanics and Foundation Engineering, ICSMFE, San Francisco, Vol. 2, 849–54. [Google Scholar]), Robertson (1990 Robertson, P. K. 1990. Soil classification using the cone penetration test. Canadian Geotechnical Journal 27 (1):151–58. doi:10.1139/t90–014[Crossref], [Web of Science ®] , [Google Scholar]), Jefferies and Davies (1991 Jefferies, M. G., and M. P. Davies. 1991. Soil classification using the cone penetration test: Discussion. Canadian Geotechnical Journal 28 (1):173–76. doi:10.1139/t91–023[Crossref], [Web of Science ®] , [Google Scholar]) and Eslami and Fellenius (1997 Eslami, A., and B. H. Fellenius. 1997. Pile capacity by direct CPT and CPTu methods applied to 102 case histories. Canadian Geotechnical Journal 34 (6):886–904. doi:10.1139/cgj-34–6-886[Crossref], [Web of Science ®] , [Google Scholar]). Analysis based on CPT data indicates that a few commonly used charts recognize relatively well problematic deposits. However, further studies are needed to increase the accuracy and capability of methods. Existing charts have some problems due to the limitations of the nature of rectangular charts based on two axes. A new format of classification chart, i.e., triangular form containing cone tip resistance (q_c), sleeve friction (f_s), and pore pressure (u₂) is proposed for soil identification which can be realized in practice. The proposed chart with more accuracy and less scattering of data than the previous charts is able to identify soil types particularly for deltaic soils.     

Lateral dynamic response of a partially embedded pile subjected to combined loads in saturated soil

In this article, an analytical solution is proposed to investigate the lateral dynamic response of a pile which is partially embedded in saturated soil layer and subjected to combined lateral and vertical loads. The saturated soil is described by Biot’s poroelastic theory and the resistance of soil is derived by potential function method. The governing equation of the pile is solved by coupling soil resistance and continuity conditions between the pile and the soil. The dynamic impedances of the pile are then obtained through transfer matrix method. To verify the validity of the proposed procedure, the present solution is compared with available solution for an idealized case. Finally, a parametric study is performed to investigate the effects of various parameters on the stiffness and damping properties of the pile-soil system. It is found that permeability of the soil and vertical load has significant effects on the dynamic response of the pile.