Novel fusion approach on automatic object extraction from spatial data: case study Worldview-2 and TOPO5000

The automatic extraction of information content from remotely sensed data is always challenging. We suggest a novel fusion approach to improve the extraction of this information from mono-satellite images. A Worldview-2 (WV-2) pan-sharpened image and a 1/5000-scaled topographic vector map (TOPO5000) were used as the sample data. Firstly, the buildings and roads were manually extracted from WV-2 to point out the maximum extractable information content. Subsequently, object-based automatic extractions were performed. After achieving two-dimensional results, a normalized digital surface model (nDSM) was generated from the underlying digital aerial photos of TOPO5000, and the automatic extraction was repeated by fusion with the nDSM to include individual object heights as an additional band for classification. The contribution was tested by precision, completeness and overall quality. Novel fusion technique increased the success of automatic extraction by 7% for the number of buildings and by 23% for the length of roads.     

Subsidence in the Kathmandu Basin,before and after the 2015 Mw 7.8 Gorkha Earthquake,Nepal Revealed from Small Baseline Subset-DInSAR Analysis

Land subsidence in densely urbanized areas is a global problem that is primarily caused by excessive groundwater withdrawal. The Kathmandu Basin is one such area where subsidence due to groundwater depletion has been a major problem in recent years. Moreover, on 25 April 2015, this basin experienced large crustal movements caused by the Gorkha earthquake (Mw 7.8). Consequently, the effects of earthquake-induced deformation could affect the temporal and spatial nature of anthropogenic subsidence in the basin. However, this effect has not yet been fully studied. In this paper, we applied the SBAS-DInSAR technique to estimate the spatiotemporal displacement of land subsidence in the Kathmandu Basin before and after the Gorkha earthquake, using 16 ALOS-1 Phased Array L-band Synthetic Aperture Radar (PALSAR) images during the pre-seismic period and 26 Sentinel-1 A/B SAR images during the pre- and post-seismic periods. The results showed that the mean subsidence rate in the central part of the basin was about ?8.2 cm/year before the earthquake. The spatial extents of the subsiding areas were well-correlated with the spatial distributions of the compressible clay layers in the basin. We infer from time-series InSAR analysis that subsidence in the Kathmandu basin could be associated with fluvio-lacustrine (clay) deposits and local hydrogeological conditions. However, after the mainshock, the subsidence rate significantly increased to ?15 and ?12 cm/year during early post-seismic (108 days) and post-seismic (2015–2016) period, respectively. Based on a spatial analysis of the subsidence rate map, the entire basin uplifted during the co-seismic period has started to subside and become stable during the early-post-seismic period. This is because of the elastic rebound of co-seismic deformation. However, interestingly, the localized areas show increased subsidence rates during both the early-post- and post-seismic periods. Therefore, we believe that the large co-seismic deformation experienced in this basin might induce the local subsidence to increase in rate, caused by oscillations of the water table level in the clay layer.     

测井地质学前世、今生与未来——写在《测井地质学·第二版》出版之时

测井地质学以地质学和测井学的方法理论为指导,综合运用各种测井信息,来解决基础地质和石油地质的地质问题。经过数十年发展,测井地质学在油气勘探开发各个环节得到广泛应用。非常规油气的兴起使得测井地质学正面临多重挑战和全新探索,亟需建立针对非常规油气的测井地质学综合方法理论体系。本文以《测井地质学·第二版》出版为契机,系统归纳了测井地质学的起源及发展历程、主要研究内容和研究方法流程。然后总结了测井资料与地震、地质信息的匹配性,并分析了不同探测特性测井方法纵向分辨率区间特征。在此基础上评述了测井地质学在井旁构造解析、沉积学特征研究、层序地层划分、地应力方向判别及大小计算、井壁裂缝识别与评价、烃源岩评价以及非常规油气“七性关系”综合评价当中的应用。但由于测井资料的负载能力有限性、测井与地质信息属性不对应性以及测井资料本身的多解性,使得测井地质学在测井—地质转换、非常规油气测井评价及其与人工智能融合方面还存在一定的问题。因此加强基础岩石物理研究,挖掘测井曲线中包含的地质信息,并与人工智能相结合,将拓展测井地质学研究的精度和广度,从而使其未来可更好地应用至非常规油气测井评价等实践工作中。     

碳酸盐岩铸体薄片面孔自动提取研究

岩石孔隙是储层储集油气的重要场所,通过铸体薄片进行岩石孔隙结构分析对储层质量评价具有重要意义。碳酸盐岩孔隙结构较为复杂,铸体薄片图像中存在大量噪声和干扰因素,致使常规方法面孔提取效果不佳,因此本文引入一种多阈值铸体薄片面孔自动提取方法（ctsPore方法）进行孔隙区域提取和面孔率估计,方法综合利用HSV色彩空间中不同参数提取孔隙区域。本文针对碳酸盐岩储层的特点确定了一套ctsPore阈值参数,以解决溶蚀孔与噪声易混淆的问题。实验以伊拉克A油田中新统 Asmari组A段碳酸盐储层为例对所使用算法进行了效果检验。算法精度和效率分析实验表明,基于ctsPore方法的碳酸盐岩铸体薄片面孔提取误差小于0.24%。全井段铸体薄片分析结果表明,A段储层面孔率范围主要分布在6%~8%,储层较为致密,从上到下A1~A3小层的储层平均面孔率分别为6. 9%、11.7%、5.4%,与储层物性、沉积微相和岩性等纵向分布规律较为吻合。     

孔隙性砂岩中单条变形带与簇状变形带的特征与区别——以远安地堑上白垩统红花套组中变形带为例

孔隙性砂岩中的变形带研究近年来取得长足进展,但有关单条变形带与簇状变形带如何区分和界定仍是一个较模糊的问题。本文以远安地堑上白垩统红花套组高孔砂岩中发育的剪切增强压实带和压实剪切带为例,对单条及簇状变形带的特征和区别做出系统分析。研究表明,虽然单条变形带的长度、宽度、错断位移、凸起高度等均明显小于簇状变形带,但是不同运动学成因的变形带宏观特征、微观结构不同,因此不能单纯以规模大小区分二者,需要结合带密度将簇状变形带与变形带列、网格构造等相区分,还需要结合其微观结构特征进行准确鉴定。单条及簇状剪切增强压实带特征类似,均不具核心碎裂带,颗粒主要为中等破碎,多表现为多个不连续分布的碎裂核。簇状剪切增强压实带内部的非均质性更强。单条压实剪切带具有核心碎裂带,依剪切力大小不同,其核心碎裂带内颗粒粉碎程度及边缘过渡带宽度不同,常伴随微小剪切缝痕迹。簇状压实剪切带在镜下可清晰识别出不同的核心碎裂带、带间区域及微小剪切缝,可见S—C组构和断续分布的滑动面。单条及簇状变形带的发育会不同程度地改变储层的物性并可能会对油气运移和开采产生影响。     

黑龙江通河县曙光石场地区土壤地球化学特征与成矿预测

为查明曙光石场地区各成矿元素和矿(化)体的分布特征,在1∶2万土壤地球化学测量的基础上,对研究区多种成矿元素进行聚类分析和因子分析。研究表明:区内Ag、Pb、Zn、Bi、Sn单元素异常个数多、变异系数值较高,具有较强的成矿潜力;区内Ag-Pb-Zn元素组合异常套和极好,异常强度较强,与岩浆热液型成矿作用相关,具有较好的找矿前景;根据单元素异常的套合情况及元素共生组合规律圈定组合异常六处并进行了槽探工程验证,在Ht-4组合异常处发现一铅锌银矿点,矿体、矿化体产于上石炭统唐家屯组流纹质凝灰岩中。     

综合物探法在砂岩型铀矿中深部找矿中的实践与分析——以新疆昭苏盆地为例

为了探查新疆昭苏盆地砂岩型铀矿的异常信息,选择可控源音频大地电磁测量、高精度磁测和土壤氡气测量三种物探方法,并简要介绍各方法的工作原理。通过分析昭苏盆地的地质特征、物性特征和本区的找矿难点,对昭苏盆地综合物探数据所蕴含的信息进行地质-物探综合解译。实践证明:可控源音频大地电磁测量对低阻和高阻体均有良好的电性响应,可以划分地层、推断断裂构造;高精度磁测可以推断氧化还原界面,辅助解释断裂构造;土壤氡气测量可辅助解释断裂构造,对地下铀矿体有指示作用,三种方法的技术特性相互补充,提高了物探解释的准确性。突破了伊犁盆地以往600 m的找矿深度,并以电性稳定的中阻厚层、磁测异常、氡异常偏高晕和峰-谷状曲线作为预测标志,解决了深埋藏条件下赋矿地质体的圈定难点,在昭苏盆地砂岩型铀矿中、深部找矿工作中取得了良好的效果。     

1948年川西理塘 M7. 3地震地表破裂特征及Riedel剪切构造分析

1948年川西理塘M7. 3地震是川滇菱形块体内部近一个世纪以来发生的震级最大的走滑型地震。在对此次同震地表破裂进行详细调查基础上,利用差分GPS对同震地表破裂带进行了精确测量与统计分析。结果揭示该地表破裂的现存长度为36 km,北端始于无量河以北,往东南沿藏坝盆地北东缘、德巫盆地东南缘,延伸至德巫乡北,分为南、北两段,而在交德附近存在约3 km长的地表破裂空区。对同震地表破裂的线密度和同震水平位错量进行分段统计后揭示,此次地震的宏观震中应位于德巫盆地中部交德东南约4~5 km处。对理塘同震地表破裂的Riedel剪切分析结果指示,该破裂带主要由R剪切组成,以发育雁列状排列的挤压鼓包(Push- up)为主要特征,伴有少量R′剪切与T裂缝,缺少P型与X型剪切。其中R剪切占95%以上,其在藏坝段(北段)的优势方向为318°,德巫段(南段)为315°,整条地表破裂带的R剪切平均方向为316°。同时发现,此次地震形成的雁列状挤压鼓包主要以平缓的“弧形”为主,这与1981年道孚MS 6. 9地震和2010年玉树MS 7. 1地震地表破裂带中出现大量反“S”形挤压鼓包有所不同,推断与走滑断裂滑动速率密切相关。沿强滑动速率走滑断层地震破裂带的Riedel剪切发育会更为完善,挤压鼓包也更发育,易形成反“S”形,反之则以平缓的“弧形”为特征。综合分析认为,1948年理塘同震地表破裂带的展布主要受藏坝盆地与德巫盆地控制,而且藏坝段(北段)与德巫段(南段)的R剪切方向存在偏差,这可能与两个拉分盆地的发育程度有关。     

Deformation patterns of upper Quaternary strata and their relation to active tectonics,Po Basin,Italy

Despite increased application of subsurface datasets below the limits of seismic resolution, reconstructing near‐surface deformation of shallow key stratigraphic markers beneath modern alluvial and coastal plains through sediment core analysis has received little attention. Highly resolved stratigraphy of Upper Pleistocene to Holocene (Marine Isotope Stage 5e to Marine Isotope Stage 1) alluvial, deltaic and coastal depositional systems across the southern Po Plain, down to 150 m depth, provides an unambiguous documentation on the deformation of previously flat‐lying strata that goes back in time beyond the limits of morphological, historical and palaeoseismic records. Five prominent key horizons, accurately selected on the basis of their sedimentological characteristics and typified for their fossil content, were used as highly effective stratigraphic markers (M1 to M5) that can be tracked for tens of kilometres across the basin. A facies‐controlled approach tied to a robust chronology (102 radiocarbon dates) reveals considerable deformation of laterally extensive nearshore (M1), continental (M2 and M3) and lagoon (M4 and M5) marker beds originally deposited in a horizontal position (M1, M4 and M5). The areas where antiformal geometries are best observed are remarkably coincident with the axes of buried ramp anticlines, across which new seismic images reveal substantially warped stratal geometries of Lower Pleistocene strata. The striking spatial coincidence of fold crests with the epicentres of historic and instrumental seismicity suggests that deformation of marker beds M1 to M5 might reflect, in part at least, syntectonically generated relief and, thus, active tectonism. Precise identification and lateral tracing of chronologically constrained stratigraphic markers in the ¹⁴C time window through combined sedimentological and palaeoecological data may delineate late Quaternary subsurface stratigraphic architecture at an unprecedented level of detail, outlining cryptic stratal geometries at the sub‐seismic scale. This approach is highly reproducible in tectonically active Quaternary depositional systems and can help to assess patterns of active deformation in the subsurface of modern alluvial and coastal plains worldwide.