粉喷桩技术加固软土地基

简介了水泥粉体喷射搅拌加固软土地基的工作机理,结合沪蓉高速公路(沪宁段)地基处理实践,论述了粉喷桩加固软土地基的计算方法.采用粉喷桩加固软基,可加快路堤填土速率,铺筑路面后的工后沉降量能得到有效地控制,保证了工程质量.     

用翁氏模型图版设计早期油气田(藏)开发方案

由于缺乏早期资料，设计早期油气田（藏）开发方案是非常困难的。在制作翁氏模型的Qctm/No-ER图版和ER-ctR图版过程提出根据探明储量No、经济极限产量Qc、假定达到峰值产量的时间tm、最终采收率ER，由翁氏模型的Qctm/No-ER图版求取增长指数b，由翁氏模型ER-ctR图版求取ctR，再求出其他参数及所有的油气田（藏）开发指标，完成早期油气田（藏）开发方案设计。     

县市级政府决策信息系统的开发应用:专业GIS 软件SK set V4 .0功能介绍———以贵州沿河土家族自治县资源遥感信息系统为例

SK setV4.0是中国地质科学院岩溶地质研究所GIS中心2001年4月开发成功的、具有自主板权的专业GIS平台软件。它集成了现今较为先进的组件、控件重用，面向对象编程等技术，并以美国Inprise公司的BorladnC^ Builder编译软件为开发平台，提供了全中文菜单环境，不仅具有基本信息和多图层查询、相关分析动态监测、多因子分析、图斑编辑、自动演示、系统维护等功能，而且还具有快速响应的工具条、友好的对话框和较强的纠错机制，很适合缺乏专业GIS人才的县市级政府管理部门使用。文中还以贵州省沿河县资源遥感信息系统为例，对SK setV4.0的功能和使用方法进行了具体的介绍。     

桥梁隔震体系振动台试验研究(IV)——隔震桥梁的设计方法探讨

在前文模型试验的基础上 ,本文总结归纳了隔震桥梁的设计方法与设计流程 ,着重论述探讨了隔震桥梁的概念设计与细部构造设计应注意的问题     

地震静校正全局最优化问题的求解

针对地震静校正存在的非线性和多参数性等问题，本文提出了一种全局优化的剩余静校正方法.在模型更新规则上，把模拟退火方法和均匀优化设计方法结合在一起，使模型的更新更为合理，从而加快了搜寻全局最优解的速度.同时提出了模型的不同分量的温度参数和退火过程的选取方式，把温度参数的选取与地震剖面的能量联系起来，使温度参数的选取具有自适应的特点.该方法克服了常规模拟退火方法所具有的寻优空间不均匀以及退火参数需通过多次试验选取的缺陷.通过实际地震资料的计算证明，本文提出的方法对地震静校正问题合理而有效.     

桥梁限位器抗震设计方法研究

本文建立了两跨简支梁桥和五跨多跨刚架桥两结构模型，针对限位器的种类、刚度、强度、安装位置，输入地震动等进行了大量工况下的数值模拟研究。研究表明限位器与柱（框架）的刚度比在0.5-2之间较优。将现有的限位器设计方法应用于两算例结构，对现有限位器设计方法进行了比较研究。     

The Advances and Prospects of Research on Earthquake Engineering at IEM

This paper describes briefly the recent advances and acievements of the research projects conducted by the Institute of Engineering Mechanics(IEM) in the period of the Ninth Five-Year Plan(1995-2000) with the support of the China Seismological Bureau(CSB),These projects are related with key problems in the field of earthquake engineering.They are:development of the methods for determining earthquake resistant design load level,study on mechanisms of earthquake damage to buildings.development of new technology of base isolation,and study on earthquake damage prediction and seismic losss assessment methods.Through these studies,quite a number of problems have een solved and some of them have een applied in earthquake engineering design and practice.     

Recent developments in seismically isolated buildings in Japan

The Building Standard Law of Japan and related Enforcement Order and Notifications have been substantially revised since the year 2000 to introduce a performance-based regulatory and deregulation system for building control systems. Up to then, time-history analyses were mandatory for isolated buildings and had to be specially approved by the Minster of the Ministry of Construction (MOC). Simplified design procedures based on the equivalent linear method for seismically isolated buildings have been issued as “Notification 2009 — Structural calculation procedure for buildings with seismic isolation” from MOC, and are now integrated into the Ministry of Land, Infrastructure, and Transportation (MLIT). Along with Notification 2009, “Notification 1446 of year 2000 — Standard for specifications and test methods for seismic isolation devices” was also issued. Buildings with heights equal to or less than 60m and that are designed according to these Notifications, including base isolated buildings, only need approval from local building officials, and no longer require the special approval of the Minister of MLIT. This paper summarizes: 1) some statistics related to buildings with seismic isolation completed up to the end of 2001; 2) simplified design procedures required by Notification 2009 of year 2000; and 3) performance of seismic isolation devices required by Notification 1446 of year 2000.     

Digital effects in the spatial economy of film: towards a research agenda

A new assemblage of digital technologies, organized around compressed software formats and broadband Internet infrastructures, is reconfiguring the motion picture industry. In this paper, I review the impacts of digitization upon the spatial economy of film in the United States via a commodity chain framework. The discussion raises some important themes for conceptual debate in economic geography.     

GRAPHER、Surfer32与CorelDRAW1O在物探成图中的应用

用GRAPHER、Surfer32软件作出给定数据的曲线图、平剖图、平面等值线图和立体曲面图后，再用CorelDRAW10来编辑，可快速做出一张满意而又少占存储空间的图件。