振动沉模大直径现浇薄壁管桩技术及其应用 (Ⅰ):开发研制与设计

振动沉模现浇混凝土薄壁管桩（PCC桩）技术是河海大学自主开发研制的用于地基加固处理的专利技术，是一种适合于软土地区的新型高效优质桩型，可有效地提高地基承载力和减小地基沉降。笔者介绍了振动沉模现浇混凝土薄壁管桩的技术原理、加固机理、施工设备、施工工艺及其设计与质量检测方法。该桩型具有承载力高、质量可靠和工程造价低等优点，具有较大的推广应用价值。     

软土大变形固结计算中参数识别的遗传算法

含水量很高的饱和软土在外荷载作用下沉降很大,小变形分析误差太大,必须通过大变形非线性固结计算来模拟。遗传算法是一种全局优化和搜索的仿生算法。近年来随着工程领域中复杂的大规模非线性系统的出现,遗传算法日益得到青睐,目前已经广泛应用到各个领域中。本文对遗传算法做了改进,主要体现在杂交算子的选取和轮盘赌模型的模拟退火拉伸,并将其用于饱和软土的大变形固结分析,解决其中的关键参数识别问题。研究表明该方法是行之有效的,值得进一步研究探索。     

嵌岩桩与含沉渣桩低应变动力检测曲线理论计算方法与特征研究

根据文献[1]、[2]介绍了基桩反射波法动测正演问题的数理模型、计算方法及其通用性，并据此计算了完整嵌岩桩及有不同厚度沉渣的嵌岩桩与摩擦桩的理论曲线。提出了在一定物性参数条件下判断沉渣是否超过规定标准的方法，并给出了数个实例。     

低应变反射波法在基桩检测中的应用实例及一些问题的探讨

根据应力波理论，介绍了用低应变反射波法在桩身完整性检测中的几个应用实例，并对检测中的一些问题作了探讨。     

Introduction of structural aseismic research in China in recent four years

Introduction Greeting the coming of the 21st century, Professor HU Yu-xian and other Chinese scholars briefed the trend of earthquake engineering in China and aboard (HU, 1999; HU, ZHOU, 1999). The experiences and lessons learning from the destructive earthquakes in China and abroad in re-cent years, the damage action of the large velocity impulse in ground motion in near field in seis-mic design, numerous earthquake examples show that there are many weaknesses in aspects of earthquake p…     

Evaluating foundation mass,damping and stiffness by the least‐squares method

This paper discusses how to use the three‐dimensional (3D) time‐domain finite‐element method incorporating the least‐squares method to calculate the equivalent foundation mass, damping and stiffness matrices. Numerical simulations indicate that the accuracy of these equivalent matrices is acceptable when the applied harmonic force of 1+sine is used. Moreover, the accuracy of the least‐squares method using the 1+sine force is not sensitive to the first time step for inclusion of data. Since the finite‐element method can model problems flexibly, the equivalent mass, damping and stiffness matrices of very complicated soil profiles and foundations can be established without difficulty using this least‐squares method. Copyright © 2003 John Wiley & Sons, Ltd.     

非开挖导向钻进实际轨迹的控制设计

非开挖导向钻进技术，具有施工速度快、适用范围广等优点，得到了广泛的应用。在实际钻进中，由于钻进在地下的不确定性，影响了导向钻进的顺利进行。到得钻进中当前点的顶角、方位角和孔深，通过均角全距法原理，可以近似地描绘出当前钻孔的空间实际轨迹，并确定钻头的位置。应用这一原理，同时运用VisualBasic语言和AutoCAD绘图工具相结合的方法，编制一套应用程序，可以直接绘制出当前钻孔轨迹，并可实现对钻孔轨迹的调控，从而保证导向钻进的顺利进行。     

Observing artificially induced strain: implications for subglacial deformation

By analysing a series of four successive thin‐sections from a ceramic clay that was subjected to uniaxial compression, we were able to monitor the development of microstructures in a fine‐grained sediment. The artificially induced microstructures, such as unidirectional clay reorientations and linear and circular grain arrangements, are identical to features that have been observed in thin‐sections of subglacially deformed tills, and therefore may be used as representative analogues. We argue that the structures, reflecting slip, planar shear displacements as well as rotational movements, can be explained by assuming a Coulomb‐plastic response to imposed shear. We conclude that sediments subjected to subglacial deformation behave as Coulomb materials, at least during the final stages of the deformation. The present study bridges the gap between field studies, experimental studies and theoretical modelling. The microscopic observations assist in visualising inferred subglacial processes and facilitate up‐ and downscaling between diverse methodological approaches. Copyright © 2003 John Wiley & Sons, Ltd.     

武汉市高层建筑岩土工程问题分析

武汉市是华中地区最大的城市,改革开放以来,兴建了许多高层建筑。高层建筑尤其是超高层建筑的主要特点是高度大、重心高、基底压力大及基础埋深大等。而武汉地区的地质条件又比较复杂,就第四纪地层而言,从最新沉积的各类软土如人工填土、淤泥类土、软塑状粘性土等,到全新世(Q4)沉积的各类砂土与卵砾石,直至晚更新世(Q3)及其以前沉积的老粘土均有分布。各类土层的厚度、深度及性质均变化较大。因此武汉地区高层建筑的岩土工程问题就显得复杂与多样,在众多复杂的岩土工程问题中,本文主要分析了比较突出的基础持力层与基础类型的确定,深基坑开挖中的边坡滑移、基坑涌水、流砂、突涌以及基坑防护等。通过对这些问题的分析,从中可以得出一些规律,对今后高层建筑的兴建具有一定的指导作用。     

Disjunctive Kriging with Hard and Imprecise Data

This paper presents a methodology for assessing local probability distributions by disjunctive kriging when the available data set contains some imprecise measurements, like noisy or soft information or interval constraints. The basic idea consists in replacing the set of imprecise data by a set of pseudohard data simulated from their posterior distribution; an iterative algorithm based on the Gibbs sampler is proposed to achieve such a simulation step. The whole procedure is repeated many times and the final result is the average of the disjunctive kriging estimates computed from each simulated data set. Being data-independent, the kriging weights need to be calculated only once, which enables fast computing. The simulation procedure requires encoding each datum as a pre-posterior distribution and assuming a Markov property to allow the updating of pre-posterior distributions into posterior ones. Although it suffers some imperfections, disjunctive kriging turns out to be a much more flexible approach than conditional expectation, because of the vast class of models that allows its computation, namely isofactorial models.