Speciation analysis and significance of ecological geochemistry

Different species of one element have different activities, so it has different effects on environment and human health. To analyze qualitatively and quantitatively the speciation of a special element in sample, which is the important basis for appraising the toxicity and studying the rule of transfer and translation of elements. Since the 1970＇s, the scheme of sequential extraction has already been used at many laboratories both at home and abroard, to get the information about heavy metals＇ activity in polluted soils. Because this method has the experimental nature, many schemes of problem has taken place, the absence of consistency of these sequential extraction have been formed. Thus the complexity of the schemes, the lack of selectivity of reagent, the lack of quality control, the result mainly related to the extraction scheme used, and so on. In the face of these problems, the study of experimental methods of sequential extraction on three different soils, sediment in Dongting Lake, soil in Jiangsu Province and loess in Shanxi Province was made. Reference materials of heavy metal speciation following sequential extraction in soil and sediment had been developed. Nowadays two kinds of sequential extraction methods which are widely used are BCR （three steps） and improved Tessier methods （seven steps）. Based on three steps of BCR, water-soluble speciation and the residual speciation were increased in our research. BCR701 was determined eight times at different laboratories using BCR three steps. The results showed that determined data obtained eight times were identical to the standard value, and it is indicated that this method has good reproducibility. The stability and homogeneity experiments indicated that the preparation of three types of candidates accorded with our requirements. Eight laboratories had afforded the determined values of 12 heavy metal elements （Cu, Pb, Zn, Mn, Co, Ni, Cd, Cr, Mo, As, Sb, Hg, Se et al.） using BCR three steps. Also, these three candidates afforded the determined values by seven steps, and 12 laboratories had participated.     

Total gaseous mercury emissions from mercury-enriched soil in Guizhou, China

Guizhou is located in the Circum-Pacific Global Mercuriferous Belt, and mercury concentrations in soil in this area are enriched. In-situ total gaseous mercury （TGM） exchange fluxes between air and soil surface were intensively measured at four sampling sites in Guiyang from 21 May to 16 June, 2003, and five sites in the Lanmuchang mercury mining area in December 2002 and May 2003, respectively. The in-situ Hg flux measurement was conducted with a dynamic flux chamber （DFC） of quartz. Overall, net emissions were obtained from all sampling sites. Soil mercury concentration and solar radiation have been proved to be the two most important parameters to control mercury emissions from soil. Meanwhile, rain events can enhance mercury emission rate significantly.     

Study on Kailyard soil amendment by adding compost of sludge

Mixture of municipal sewage sludge and organic garbage, which was alternatively treated by aerobic and anaerobic composting technologies for 60 days. The characteristics of the compost are as follows： the total nitrogen （TN）, total phosphors （TP） and total potassium （TK） are 1.40%, 0.101% and 1908.32 mg/kg on dry weight basis, the contents of Cu, Ni, Cd, Cr, Pb and Zn are 131.23, 21.49, 1.31, 35.49, 72.50 and 616.76 mg/kg on dry weight basis. A basin-scale experiment was carded out by planting watercress with kailyard soil fertilizing with the compost, the results showed that the municipal sewage sludge and organic garbage compost could promote the production of watercress to different degrees, the crop biomass increased from 74.46% to 312.00% with the amount of compost fertilizing on the kaliyard soil while the amount of compost fertilizing on the kaliyard soil below 150 g per 3.75 kg kaliyard soil and decreased from 312.00% to 102.29% while the amount of compost fertilizing on it over 150 g per 3.75 kg kaliyard soil, so the optimal addition of compost in the watercress and soil was 150 g compost per 3.75 kg kailyard soil. Furthermore,     

Modeling the seismic response of basin-edge structure by a sequential waveform method

A sequential waveform method is developed to simulate the seismic response of basin-edge structure excited by a plane incident P-wave. The full procedure involves: (a) a previous parameterization of the investigated model using the seismic wave velocities and depths of the sedimentary stratifications; (b) an input motion determined from the records at stations installed on hard rock; (c) forward computation of the P-SV elastic wave field by means of a two-dimensional finite difference (FD) method; (d) the optimization of the model vector using simulated annealing technique and comparing the simulated seismic response of the tested structure with the observed wave field; (e) the correction of the initial model by trial-and-error by testing the differences between synthetics and observed data, and (f) the final solution obtained by iteration using the conjugate gradient algorithm. The search of an optimal basin-edge model has been parallel processed by varying the shapes and velocities of strata on the basis of the fitting of relative timing, amplitude and phase between the output and the observed data. The input motion and sensitivity have been checked and the validity of the method has been demonstrated by numeric analysis. Using the teleseismic records generated by 7 earthquakes recorded at 26 broadband seismic stations, we have studied the seismic velocity structure of the southern edge of the Jiyang depression located in the Bohai Bay basin, northern China. Two cross sections show an agreement between the velocity results and the geological sections available in the region. In addition, we obtain evidence of three hidden faults under the sections and features that suggest major extensions at the Paleogene.     

Analysis of a rigid footing lying on three-layered soil using the finite difference method

A numerical procedure is described for the analysis of the vertical deformation and the stress distribution of the strip footings on layered soil media. Three layers of soil with different stiffness are considered with the middle soil layer the thinnest and most stiff layer. The soil media is discretized and using the theory of elasticity, the governing differential equations are obtained in terms of vertical and horizontal displacements. These equations along with appropriate boundary and continuity conditions are solved by using the finite difference method. The vertical and horizontal displacements, strains and stresses are found at various nodes in the soil media. Parametric studies are carried out to study the effect of the placement depth of the middle soil layer, the relative ratios of the moduli of deformation of the soil layers on the vertical displacement of the footing and the vertical stress distribution. These studies reveal that the middle thin but very stiff layer acts like a plate and redistributes the stresses on the lower soft soil layer uniformly. The displacement on the top and bottom of the middle soil layer is almost the same showing that the compression of the middle layer is negligible as it is very stiff.     

Break out resistance of inclined anchors in sand

Inclined anchors are widely used in a variety of civil engineering problems to resist oblique loads, most relevant being in transmission towers and in rocks and dams for structural strengthening. In the present study, the breakout resistance of the inclined anchors in sand has been worked out using limit equilibrium approach. The breakout resistance has been calculated for different soil friction angles with varying relative depth ratio and anchor inclination. The break out factor increases continuously with the inclination of the anchor. A comparison of predicted values of break out resistance of anchors by the proposed analysis with the experimental values as reported by the other researchers showed reasonably good agreement.     

紫色丘陵区水土保持林低效化的土壤成因

四川盆地紫色丘陵区的水土保持林低效化问题已较严重。研究了其土壤方面的成因。通过对土壤构造、土壤肥力特性、土壤结构性评价等研究，指出该区人工林地的土壤构造发育不正常，土壤腐殖质胶体积累量低。土壤结构质量差等林地土壤退化是土壤水土保持功能降低的主要原因。根据研究的初步结果，提出了相应的对策建议。     

金沙江干热河谷区土壤侵蚀危险度评价——以云南元谋为例

利用空间主成分分析方法，选取降水、坡度、植被、土地利用、土壤类型、人口、高程等作为评价指标，建立空间主成分评价模型Pi=0．78X1＋0．06X2＋0．05X3＋0．04X4，将研究区分为无险型、轻险型、危险型、强险型和极险型五种类型，较为准确地得到了危险度综合评价结果。因此，空间主成分分析模型，在土壤侵蚀危险程度评价方面的应用较为成功，是一种科学有效的研究方法。