基于钻孔数据的大同场地类别与地震动参数分布研究

收集在大同市开展的117项地震安全性评价报告,重点整理报告中的319个钻孔数据,核对各场地类别。参考第五代地震动参数区划图,选取有代表性的22个工程场地,重新进行地震危险性概率分析和土层反应计算,确定各场地50年超越概率为63%、10%、2%的地震动参数,分析大同市场地类别分布特征和地震动参数分布特征。结果表明,这些项目集中分布在大同市南部,工程场地类别主要为Ⅱ类和Ⅲ类,绝大多数为Ⅱ类。50年超越概率10%的水平峰值加速度中,只有1个工程场地的结果是0.182g,位于0.15g区,其余均位于0.20g区。50年超越概率10%的特征周期在0.52~0.65s之间,平均值为0.58s。     

Review on the study of topographic effect on seismic ground motion

Topographic effect study is a very important research topic in seismology, seismic engineering,earthquake engineering, engineering earthquake construction and engineering seismology. This paper focuses on its present development status. Post-earthquake investigation has found that the existence of topography caused more serious earthquake damage. The actual seismographs also recorded the topographic amplification effect of 6 to 7 times and even more than 10 times. Numerical simulation is an important technique to study topographic effect, which complements the lack of observed records. However researches on 3-D topographic effect are not enough and need to be studied deeper. To find the main influence factors and the quantitative relationship between topography and ground motion are required very urgently. Obviously the achievements not only can be applied in the earthquake resistant design, but also can provide the quantitative pre-earthquake disaster prediction and quantitative post-earthquake disaster evaluation.     

软基上的空心方块斜坡堤

根据实际工程需要,提出了一种适宜建造在软土地基上的新的空心方块斜坡堤型式。这种新型结构是利用各空心方块之间以及空心方块本身的空隙,降低堤身单位体积的重量以及堤身断面总重量,从而满足软土地基承载力和整体稳定的要求：结合长江口深水航道治理工程的北导堤堤头部位2．6km长的软基段,对空心方块斜坡堤的设计和试验研究情况作概要介绍。     

A three‐dimensional transmitting boundary formulated in Cartesian co‐ordinate system for the dynamics of non‐axisymmetric foundations

A three‐dimensional transmitting boundary is formulated in the Cartesian co‐ordinate system. It is developed for the dynamic soil–structure interaction problems of arbitrary shape foundations in laterally heterogeneous strata overlying rigid bedrock. Dynamics of a rectangular rigid surface foundation on a homogeneous stratum is analysed by a hybrid approach in which the finite region including foundation is modelled by the conventional finite element method and the surrounding infinite region by the newly developed transmitting boundary. To demonstrate its strength, the present method is applied to a rectangular foundation in a horizontally heterogeneous ground consisting of two distinct regions divided by and welded along a vertical plane. Copyright © 2000 John Wiley & Sons, Ltd.     

Performance of multiple tuned mass dampers for attenuating undesirable oscillations of structures under the ground acceleration

Multiple tuned mass dampers (MTMDs) consisting of many tuned mass dampers (TMDs) with a uniform distribution of natural frequencies are considered for attenuating undesirable vibration of a structure. The MTMD is manufactured by keeping the stiffness and damping constant and varying the mass. The structure is represented by its mode‐generalized system in the specific vibration mode being controlled using the mode reduced‐order method. The optimum parameters of the MTMD are investigated to delineate the influence of the important parameters on the effectiveness and robustness of the MTMD by conducting a numerical searching technique in two directions. The parameters include: the frequency spacing, average damping ratio, mass ratio and total number. The criterion selected for the optimization is the minimization of the maximum value of the dynamic magnification factor (DMF) of the structure with MTMD (i.e. Min.Max.DMF). In this paper, for the sake of comparison, the MTMD(II), which is made by keeping the mass constant and varying the stiffness and damping coefficient, and a single TMD are also taken into account. It is demonstrated that the optimum frequency spacing of the MTMD is the same as that of the MTMD(II) and the optimum average damping ratio of the MTMD is a little larger than that of the MTMD(II). It is also found that the optimum MTMD is more effective than the optimum MTMD(II) and the optimum single TMD with equal mass. Copyright © 2000 John Wiley & Sons, Ltd.     

东胜体育场钢结构施工临时支撑体系监测

东胜体育场是我国目前国内规模最大的开闭顶体育建筑,固定屋盖和巨拱使用大跨度钢桁架结构,采用分段拼装的方法施工,在施工期间屋盖和巨拱的1万吨重力荷载大部分由临时支撑体系承担,为保障支撑体系的安全,在钢结构施工期间,对临时支撑体系垂直度、侧向弯曲,位移、基础沉降进行动态监测。本文介绍了监测方法和监测结果,对类似工程有借鉴意义。     

1977 - 2017年雅江流域中下游大气/地面冻融指数时空变化特征

冻结指数是某个地区冻结期长短和严寒程度的综合表征, 融化指数是某个地区融化期长短及正积温高低的综合度量, 冻融指数也是计算活动层厚度和季节冻结深度的关键参数, 并可用于多年冻土分布预报。利用雅鲁藏布江（雅江）流域中下游11个气象站点的逐日气温、 地面温度数据计算了1977 - 2017年大气及地面冻融指数, 并分析其时空变化趋势。结果表明： 雅江流域中下游近40年来冻结指数呈显著下降趋势, 大气冻结指数、 地面冻结指数、 大气融化指数、 地面融化指数多年变化范围分别为208.4 ~ 508.0、 136.9 ~ 371.0、 2 171.8 ~ 2 499.8、 3 350.2 ~ 4 315.2 ℃·d; 其气候倾斜率分别为-36.6、 -48.7、 90.7、 115.8 ℃·d·（10a）^-1。雅江流域大气和地面冻结指数以海拔4 488.8 m的嘉黎最大, 海拔2 991.9 m的林芝最小; 大气和地面融化指数则以海拔3 560 m的泽当最大, 海拔4 488.8 m的嘉黎最小。流域内大气负温日数变化规律与地面负温日数变化趋势基本一致, 其气候倾向率分别是-6.28 d·（10a）^-1和-5.57 d·（10a）^-1。研究结果可为雅江流域冻土预报, 冻融作用所形成的冰缘地貌研究及其引发的地质灾害如冻融滑塌、 冻融泥流等灾害的监测与预防提供借鉴。     

合成孔径雷达差分干涉测量（D-InSAR）技术在多年冻土区地表变形监测中的应用

多年冻土区地表变形严重影响着区域内生态环境和工程设施的稳定性。合成孔径雷达差分干涉测量（differential interferometric synthetic aperture radar, D-InSAR）技术作为一种新型的空间对地观测技术, 为多年冻土区地表变形监测提供了新方法。通过近20年的不断深入研究, 利用D-InSAR技术的多年冻土区地表变形监测取得了大量研究成果。首先介绍了D-InSAR技术测量地表变形的理论基础, 进而概述了D-InSAR技术在多年冻土区地表变形测量中的应用现状, 然后总结了D-InSAR测量过程中存在的关键问题及可能的解决方法。在此认识和分析的基础上, 对D-InSAR技术今后在多年冻土区地表变形监测中的发展方向进行了探讨, 以期为D-InSAR技术在多年冻土区地表变形监测中的推广应用和深入研究提供参考。     

单侧控制条件下SPOT5 HRG影像的定向试验

高分辨率卫星影像已经成为获取地理信息的重要数据源,而其定向是一项关键技术。本文利用单侧不同数量及分布的控制点对SPOT5 HRG影像进行了定向试验,探讨了在单侧控制条件下SPOT5 HRG影像的定向精度情况,为地面控制点获取较困难地区的影像定向提供了一条参考途径。     

指数平滑与曲线拟合模型在沉降监测中的应用

通过分析建筑物沉降监测数据的特点,采用了指数平滑和曲线拟合模型对建筑物沉降监测数据进行处理,实现了两种数据处理模型的建模过程,并用于建筑物沉降量的实际预测,验证了模型的可行性。