Construction Problems on the Karstified Limestone Tuffs of Condeixa, Central Portugal: A Case Study

During the excavations for the foundations of a three storey building on the limestone tuffs of Condeixa, Central Portugal, a large dissolution fissure and smaller dissolution voids were found. Since the area has never been the subject of engineering geology investigation, it was decided to evaluate the risk associated with the construction of the building. These limestone tuffs were formed in a continental environment by the precipitation of calcite carried by the water coming from the large limestone body in the east. The precipitated calcite mixed with the terrigenous materials and around trunks and leaves of plants, originating a very heterogeneous and porous ground, which is characteristic of limestone tuffs. The study started with a detailed geological survey followed by a large number of destructive drillings, located essentially under the pad foundations. The results revealed several karstic cavities with serious problems for the building foundations and the structure, and many smaller dissolution cavities, often filled with clayey soils. The ground treatment solutions used included, dental cleaning, filling with concrete or granular material the dissolution structures accessible at the level of the foundation, reinforcement of the footing and the structure of the building and adding a continuous foundation beam to hold the foundations together. The cost of the engineering geology study, site investigation, ground treatment, and the reinforcement of the foundation and building, increased the total construction cost from 2%, at the design stage, to 4.8%.     

大吨位基桩抗压载荷试验中的锚桩预应力保护技术

竖轴向承载力是桩基础设计的重要参数,现场静载试验是目前确定桩基承载力的主要手段之一。本文依托黄陵延安段高速公路洛河特大桥试桩工程,通过对原有工程桩施加预应力,形成了以工程桩为锚桩的锚拔体系。加载过程中试桩应力、锚桩应力及桩顶位移测试,结果表明,结合预应力技术,以工程桩作为锚桩构成桩基础静载试验的锚拔体系是可行的,同时提出了施加预应力大小的原则、方法以及确保后期曾作为锚桩的工程桩有足够承载能力应采取的必要措施。     

新近沉积粉细砂层地基的试验与评价

通过对邯郸市某车间地基的勘察．分析和探讨了新近沉积粉细砂地层的勘察手段、其物理力学性质，及其利用载荷试验确定承载力的标准取得了较为满意的结果，提出的一些分析方法，对新近沉积的粉细砂地层的勘察具有一定的借鉴作用。     

Reliability Based Assessment of Shallow Foundations Using Mathcad

A reliability based method was used to design and analyse shallow foundations using first-order Taylor series approximation. The computer program Mathcad was used to facilitate all mathematical and computional efforts. This method is an effective tool to assist the foundation designers and analyists to investigate how reliable their designs or analyses are in relation to the ultimate bearing capacity of the foundations. The approach presented in this paper provides a reliable alternative for design and analysis of shallow foundations, rather than the conventional design methods, which employs the assumptions of a specified saftey factor. Several examples were presented for design and analysis of strip footings embedded in sandy soil, and rectangular and square footings analysis embedded in clayey soils. The program input and output of each example are also presented and discussed.     

燕山水库坝基防渗墙优化设计

因现场资料不足或分析手段落后等原因,当前进行水库坝基防渗墙设计,往往存在过于保守的倾向。以河南省燕山水库为例,基于优化设计的思路,采用目前较为成熟的二维有限单元法,对不同防渗条件下的坝基渗流场分别进行了模拟,并将计算所得比降、流量与允许比降、允许流量做了对比,从定量的角度提出了既安全、又经济的防渗方案:防渗墙厚度取0.8m,深度取打入破碎带5m。     

滑坡治理中格构锚固结构的解析解分析

在分析格构锚固结构受力的基础上 ,将格构梁简化为受集中力作用的弹性地基上的梁 ,提出了格构锚固结构的力学模型 ,利用 Winkler弹性地基上梁的解析解对格构梁进行了内力和变形的分析 ,发现格构梁的受力状况受弹性特征λ、梁格间距 ls以及悬臂长度影响 ;建议梁长 l与λ宜满足 lλ≥ 2π;采用较小间距的格构梁以及小吨位锚索 ,间距宜满足 lsλ<π/ 2 ,悬臂长度取 (0 .3～ 0 .5 ) ls,并将分析结论应用于三峡库区巴东太矶头东滑坡治理工程的设计中     

粉喷桩技术加固软土地基

简介了水泥粉体喷射搅拌加固软土地基的工作机理,结合沪蓉高速公路(沪宁段)地基处理实践,论述了粉喷桩加固软土地基的计算方法.采用粉喷桩加固软基,可加快路堤填土速率,铺筑路面后的工后沉降量能得到有效地控制,保证了工程质量.     

冲击压实技术在路基工程中的应用研究

通过介绍冲击压实机基本原理,分析冲击压实技术特点,结合工程实例,表明冲击压实技术具有减少路基工后沉降、提高路基整体强度及加固软弱地基作用效果显著,同时填石路堤施工工艺的改进和压实标准进行了研究.     

A non-linear stress-stiffness model for geomaterials at small to intermediate strains

A double exponential fitting model (DEFM) capable of expressing the non-linear stress-stiffness relationship of geomaterials has been proposed by Shibuya et al. (1997). The model comprises two material constants; the elastic stiffness at very small strains and the strength, together with other free parameters to determine the complete stress-stiffness relationship. In this paper, the capability of the original function used for DEFM in simulating the tangent stiffness-stress relationship of geomaterials is first discussed. Second, the methods for determining the free model parameters, as well as its conversion to obtain a stress-strain relationship are proposed. The applicability of DEFM to predicting non-linear stress-stiffness relationship is examined in detail in a total of forty-nine fitting cases of compression test data on sedimentary rock, artificial soft rock and soft clay. It is found that the DEFM is effective in expressing the non-linear stress-stiffness relationship of various kinds of geomaterials at small to intermediate strains, say less than 0.5%. The superiority of this model compared to other fitting models currently in use is also demonstrated in some of the fitting cases.     

软基上高速铁路路桥过渡段的技术措施研究

通过对高速铁路路基与桥梁过渡段动力特性分析，指出结构物沉降差是导致轨面不平顺的主要因素。分析了沉降差产生的原因，提出了软基上路桥过渡段的结构设计方案，并对其施工方法及质量检测标准进行了探索。