基于孔壁应变发展规律的压裂孔三阶段起裂特征试验研究

利用自行研制的煤岩体水力压裂试验系统,开展了配比型煤与原煤水力压裂试验,测试并分析了水力压裂过程中压裂孔孔壁应变-水压曲线,并基于孔壁应变的发展规律,分析了压裂孔的三阶段起裂特征。结果表明,在压裂孔起裂过程中,钻孔孔壁呈现拉伸与压缩应变两种类型,并呈现拉伸破裂区与压缩变形区,其中压缩型应变具有较好的可恢复性,其应变恢复比远大于拉伸型应变;钻孔起裂过程分为3个阶段,即水气作用诱导微损伤形成阶段,孔壁内形成气流通道并产生初始损伤;局部损伤带形成阶段,孔壁形成拉伸破裂区和压缩变形区;试件失稳破坏阶段,裂缝不断延伸直至试件破裂,拉伸破裂区依然保持拉伸变形并较好地保持残余变形,而压缩变形区则由于作用力转向而得到一定程度恢复。研究成果对于揭示钻孔起裂行为及能量的演化规律具有重要理论意义。     

Crust restoration for the western Lachlan Orogen using the strain-reversal,area-balancing technique: implications for crustal components and original thicknesses

Strain reversal of structural/stratigraphic profiles at different scales in the western Lachlan Orogen provides a perspective on original crustal thickness estimates, the former depositional basin width of the proto-western Lachlan Orogen, the original sedimentary-fan thickness, and the possible length extent of lower crust lost by subduction. Retrodeformation using strain-reversal techniques allows basin reconstruction giving an original width of the western Lachlan Orogen basin receptor of between 800 km (minimum) and ～1150 km (maximum), depending on the amount of stratal duplication allowed in the turbidites. Crude area balancing of the regional cross-section, adding in sectional volume lost by erosion and assuming strain compatibility between the upper and lower crust, suggests that the predeformation crustal thickness ranges between 15 km and ～21 km, with a lower crustal thickness (oceanic lithosphere) of ～9 km and a turbidite fan thickness of ～6 km (minimum) and ～12 km (maximum allowable), respectively. Disparity between the calculated fan thickness and that derived from measured stratigraphic sections adjusted for strain (～6 km) indicates that some form of crustal stacking must be important in structural thickening of the turbidite crustal component. By varying shortening due to fault stacking, mass balance dictates the mismatch of the upper crustal (uc) and lower crustal (lc) retrodeformed lengths, and therefore provides an estimate of lower crustal loss by subduction. End members range from: (i) a 12 km-thick fan without fault duplication, a basin width of ～800 km where uc = lc giving no lower crustal loss by subduction; to (ii) a ～6 km fan, requiring duplication by faulting, a basin of ～1150 km where uc > lc, and ～360 km of lower crust length (～30%) lost by subduction. This suggests that the total thickness of underplated igneous material in the western Lachlan Orogen is low, probably < ～2 km.     

Numerically observed shear bands in soft sensitive clays

The numerical challenges that arise in modelling shear bands in soft sensitive (SS) clays have not yet been fully resolved. Convincing and well-accepted solutions have yet to be found. This paper presents some novel information related to the shear band phenomenon in SS clays. In this study, the hypothesis is that the generation and dissipation of excess pore pressure from shear bands could regularise the strain softening and result in a mesh independent shear band thickness. The generation and dissipation of excess pressure is modelled by a coupled consolidation process. The simulation aims at modelling two counteracting mechanisms in the SS clay. First, the shear band narrows because of strain softening. Second, the internal pore water pressure drainage reduces the rate of strain softening. This counteracting mechanism provides an inherent regularisation technique for SS clays. This study presents some numerical results involving these two counteracting mechanisms. This study also shows that an inherent internal parameter applicable for SS clays can be defined by the ratio between soil permeability and the applied strain rate. In the case of SS clays, the range of this parameter varies from 0 to 0.0002 mm.     

基于Hoek-Brown强度准则的应变软化模型在隧道工程中的应用

基于Hoek-Brown强度准则及量化GSI围岩评级系统,分析岩体强度弱化行为,总结出确定岩体峰值及峰后强度参数的方法,提出应变软化模型的简化计算方法,并以FLAC3D数值模拟软件为工具,采用收敛-约束法对深埋大断面隧道支护结构及围岩稳定性进行分析,计算出支护结构安全系数。通过分析得出：随着围岩应力释放,岩体软化参数随之减小,岩体强度弱化行为突出;高地质强度GSI指标（GSI=75）的岩体虽然强度弱化程度较大,但围岩的变形量仍然较小,而低GSI指标（GSI=25）的岩体表现出了理想弹塑性行为;提出的简化Hoek-Brown应变软化模型适合应用于隧道中岩质相近区段围岩的研究;采用收敛-约束法对隧道支护结构的稳定性进行分析,可为隧道工程的初期支护优化设计及安全性评价提供参考。     

Modifications of resonant column and torsional shear device for the large strain

Conventional RC/TS (resonant column and torsional shear) devices use a specimen with an aspect ratio (height-to-diameter) of 2:1 and this generates a maximum shear strain in the sample of about 1.5% at the maximum rotation of the driving system. The objective of this study is to modify the RC/TS device to generate higher strain amplitude. The modifications include a new base pedestal to overcome the limitations in the travel of the drive system and modification of the coil wiring to increase torque. The effects of the new coil wire on torque in the electromagnetic drive system were evaluated and the application of the modified device was illustrated using sand soil.     

考虑Gmax附加衰减的场地地震响应离心机试验数值模拟

在常规的场地地震响应有效应力分析法中,通常只考虑Gmax随有效应力和孔隙比的变化,而最新的试验研究表明,Gmax在大应变幅振动下存在附加衰减。收集了不同类型土体在大幅振动下的298组Gmax数据,拟合并给出了对应于两种Gmax附加衰减模式的计算模型,通过编制可考虑Gmax附加衰减影响的一维场地地震响应有效应力分析程序,分别对典型场地和离心机振动台模型场地的地震响应进行分析对比。结果表明：Gmax附加衰减对场地加速度和剪应力响应均有较大影响,将加速场地液化进程和扩大场地最终液化范围;考虑Gmax附加衰减可较好地模拟动力离心模型试验场地动力响应;但在强震情况下,场地迅速液化,Gmax附加衰减对场地动力响应的影响反而减弱。     

TBP萃淋树脂微色谱柱分离富集钼的研究及应用

研究了ＴＢＰ萃淋树脂微色谱柱分离富集微量钼的柱性能,确定了分离钼的最佳条件。在减压条件下,运用零空床体积洗脱技术,以３ｍｏｌ／ＬＨＣｌ为上柱介质,０．５ｍｏｌ／ＬＨＣｌ洗脱,可使钼（ＶＩ）与钨（Ⅵ）、铁（Ⅲ）、锡（Ⅳ）等干扰离子快速分离,采用邻氯苯基荧光酮胶束增溶光度法,测定矿石中微量钼,结果满意。     

高地应力数理模型的建立及应用

高地应力钻孔缩径现象很常见,一般钻进中只能依靠现场分析及经验来判断缩径情况,这对于预测以及精确计算缩径程度是远远不够的.文中建立了高地应力条件下钻孔的数理模型,推导出了各种应力、应变以及位移的计算公式,并应用这些公式计算了某高地应力矿区钻孔的多种参数,判断了钻孔的稳定性情况.     

基质吸力变化引起的体积应变研究

与降雨有关的边坡表层变形位移,其根源是基质吸力降低引起的非饱和土体积应变。利用某滑坡体的原状样及其重塑样,分别在100kPa、200kPa围压作用下,采用单纯增加基质吸力的应力路径,对基质吸力引起的体积应变,进行试验测试。结果显示: (1)试样的体应变,随基质吸力的增大,单调增大,服从对数函数关系;(2)围压由100kPa增加到200kPa的试样体积模量,随基质吸力的增大,单调增大,服从幂函数关系;(3)与基质吸力有关的体积变化系数,随基质吸力的增大,单调减小,服从幂函数关系;并且当基质吸力大于200kPa以后,随基质吸力增大,体积变化系数接近于常数,约为0.0059左右。在此基础上,本文针对这种由单纯基质吸力变化引起的非饱和土体积应变规律及机理,进行了探讨。