小尺度曲率属性在煤田小微构造解释中的应用

煤田小微构造作为煤矿主要致灾源之一,对其精细解释与圈定是矿井安全高效生产的重要保障,而单纯借助传统的地震勘探方法与技术手段解决该问题,已无法满足精准开采地质保障的需求。为此,基于叠后三维地震数据体,通过提取60 Hz以上高频段成分信息,进行地震数据重构,并基于此提取小尺度的最小负曲率属性,对研究区小微构造进行解释与分析。通过与现场小微构造揭露和解释情况对比表明：基于高频信息重构的地震数据体纵向分辨率高,提取的小尺度曲率属性细节刻画能力强,相对于传统的最小负曲率属性在指示小微构造方面优势明显。因此,将基于重构地震数据体提取的小尺度曲率属性应用于煤田小微构造解释与圈定是合理可行的。     

路堤侧向变形性状及预测模型研究

结合大量实测资料和已有的研究成果,分析了路堤荷载作用下水平向应变随深度的变化规律,得出了侧向变形沿深度呈“弓”型分布的变化规律;提出了符合该变化规律的预测模型及参数求解方法,模型中a、b和c等3个待定参数能简单地求出。工程实践表明,该预测模型不仅反映了侧向变形随深度的变化规律,且有一定的精度,能反映出最大侧向变形发生的位置,应用效果良好。     

西藏樟木口岸震后滑坡灾害变形InSAR监测分析

位于中国和尼泊尔边境的西藏樟木口岸是国家一类陆路通商口岸,也是西藏最大的边贸中心口岸。2015年尼泊尔大地震之后,西藏樟木口岸因多次发生滑坡灾害,而导致口岸关闭。为了调查樟木口岸区域滑坡灾害的分布和变形情况及更好的服务于区域减灾防灾,利用InSAR技术对覆盖该区域的Sentinel-1A和ALOS-2两种卫星影像数据进行了处理,并通过分析视线向年均形变速率图,圈定了17处疑似滑坡,并对其中的5处典型滑坡进行时间序列形变特征分析,监测识别出的滑坡基本沿318国道所在一侧的波曲河左岸分布。InSAR调查结果表明受地震影响樟木地区的滑坡多分布在沿波曲河左岸的陡峭山体上,中尼公路迪斯岗至友谊桥段的古滑坡出现了局部复活的现象,同时樟木镇居民所在的城区也发育有扎美拉山危岩体崩塌滑坡灾害。      

Crust restoration for the western Lachlan Orogen using the strain-reversal,area-balancing technique: implications for crustal components and original thicknesses

Strain reversal of structural/stratigraphic profiles at different scales in the western Lachlan Orogen provides a perspective on original crustal thickness estimates, the former depositional basin width of the proto-western Lachlan Orogen, the original sedimentary-fan thickness, and the possible length extent of lower crust lost by subduction. Retrodeformation using strain-reversal techniques allows basin reconstruction giving an original width of the western Lachlan Orogen basin receptor of between 800 km (minimum) and ～1150 km (maximum), depending on the amount of stratal duplication allowed in the turbidites. Crude area balancing of the regional cross-section, adding in sectional volume lost by erosion and assuming strain compatibility between the upper and lower crust, suggests that the predeformation crustal thickness ranges between 15 km and ～21 km, with a lower crustal thickness (oceanic lithosphere) of ～9 km and a turbidite fan thickness of ～6 km (minimum) and ～12 km (maximum allowable), respectively. Disparity between the calculated fan thickness and that derived from measured stratigraphic sections adjusted for strain (～6 km) indicates that some form of crustal stacking must be important in structural thickening of the turbidite crustal component. By varying shortening due to fault stacking, mass balance dictates the mismatch of the upper crustal (uc) and lower crustal (lc) retrodeformed lengths, and therefore provides an estimate of lower crustal loss by subduction. End members range from: (i) a 12 km-thick fan without fault duplication, a basin width of ～800 km where uc = lc giving no lower crustal loss by subduction; to (ii) a ～6 km fan, requiring duplication by faulting, a basin of ～1150 km where uc > lc, and ～360 km of lower crust length (～30%) lost by subduction. This suggests that the total thickness of underplated igneous material in the western Lachlan Orogen is low, probably < ～2 km.     

Numerically observed shear bands in soft sensitive clays

The numerical challenges that arise in modelling shear bands in soft sensitive (SS) clays have not yet been fully resolved. Convincing and well-accepted solutions have yet to be found. This paper presents some novel information related to the shear band phenomenon in SS clays. In this study, the hypothesis is that the generation and dissipation of excess pore pressure from shear bands could regularise the strain softening and result in a mesh independent shear band thickness. The generation and dissipation of excess pressure is modelled by a coupled consolidation process. The simulation aims at modelling two counteracting mechanisms in the SS clay. First, the shear band narrows because of strain softening. Second, the internal pore water pressure drainage reduces the rate of strain softening. This counteracting mechanism provides an inherent regularisation technique for SS clays. This study presents some numerical results involving these two counteracting mechanisms. This study also shows that an inherent internal parameter applicable for SS clays can be defined by the ratio between soil permeability and the applied strain rate. In the case of SS clays, the range of this parameter varies from 0 to 0.0002 mm.     

单轴压缩下岩石应变局部化的应变梯度塑性解

通过在屈服函数中引入材料内部长度建立应变梯度塑性增量本构关系,对岩石材料在单轴压缩条件下应变局部化的二维情况进行了研究。首先,建立了在Mises屈服准则下平面应变情况的岩石材料应变局部化带的带宽与其倾角的关系式,讨论了其带宽的分布范围和最大值与最小值形成的条件,给出岩石材料破坏Ⅰ, Ⅱ类变形的条件,并推出破坏的临界角度;其次,对岩石材料Ⅰ类变形进行了详细地分析,讨论了在不同泊松比 和 条件下材料应变局部化带的倾角的变化范围;最后,利用所得的结论同材料破坏的库仑准则进行对比研究,对内摩擦系数给予了合理的解释。     

概率性分析在黄土场地动力沉降评价中的应用

天然黄土动残余应变研究主要依赖室内动三轴试验,如何将有限室内试验数据合理地应用于场地动力沉降的定量评价,是岩土地震工程领域中研究涉足尚少的重要科学问题。应用概率统计与蒙特卡洛模拟等非确定性分析方法,借助综合考虑固结应力、结构强度、空间体积特性和地震动荷载等动残余应变关键影响参量的估算模型,提出有效弱化土体物性参量不确定性（离散性与随机性）的场地动力沉降概率性评价的思路与方法。应用结果显示,利用该方法得出的场地动力沉降的概率分布特征,能够反映天然黄土动残余应变的基本认知特点,对明晰地震作用下天然黄土场地精细动力沉降特性以及据此采用适当合理的地基处理方法,具有理论意义与实用价值。     

原状膨胀土剪切力学特性的应变速率效应

为研究应变速率对原状膨胀土力学性状的影响,通过GDS三轴试验系统进行了不同速率和围压下的固结不排水三轴剪切试验,分析了应力−应变曲线、孔隙水压力、剪切强度以及破坏模式随应变速率的变化规律。结果表明：不同应变速率下,膨胀土应力−应变曲线均呈应变硬化型。随着应变速率的增加,不排水剪切强度单调递增,引入应变速率参数ρ_0.9后发现,不排水强度增长率为14.3%～23.2%,平均值为18.4%。低围压下,应变速率对孔隙水压力影响较小,随着围压的增大,孔隙水压力的发展趋势由软化型转变为硬化型,孔隙水压力峰值随应变速率的增大而减小。原状膨胀土应变速率效应与其多裂隙性密切相关,破坏形式表现为小应变速率下主剪切带与次剪切带共存,大应变速率下仅有主剪切带,裂隙或多剪切带的出现强化了膨胀土强度的应变速率效应。     

矿石体重回归分析在新疆乌宗布拉克矿区的应用研究

在资源储量估算的过程中,矿石小体重的准确与否将直接影响到资源储量估算的客观程度。对矿石小体重的准确预测将需要通过大量的统计分析工作,传统的方法是利用矿石小体重的算术平均值进行估算矿床资源储量,并没有考虑到多矿种对矿石小体重的影响程度。本文利用Excel软件"数据分析"的"回归"功能模块,对实验室所测定的矿石小体重值与其对应品位进行二元线性回归分析,快速、准确地构建矿石体重与其品位的数学模型,从而为资源储量估算提供了更客观、更科学的矿石体重模型。