The behavior of a multilayered porous thermo-elastic medium with anisotropic thermal diffusivity and permeability

With the aid of integral transform techniques, this paper presents an extended precise integration solution for thermal consolidation problems of a multilayered porous thermo-elastic medium with anisotropic thermal diffusivity and permeability due to a heat source. From the fundamental governing equations, ordinary differential equations are derived by employing Laplace–Hankel transforms. By applying the extended precise integration method, equations in the transformed domain can be solved, and the actual solutions are further obtained by adopting a numerical inverse transformation. The accuracy and feasibility of the proposed theory is demonstrated by contrastive analysis with existing studies. Finally, several examples are carried out to investigate the influence of heat source’s type, axial distance, burial depth of heat source, ratio of thermo-permeability, permeability anisotropy, thermal diffusivity anisotropy and stratification on the thermal consolidation process.     

SEISMIC IMPACT LOADING IN INELASTIC TENSION-ONLY CONCENTRICALLY BRACED STEEL FRAMES: MYTH OR REALITY?

Tension-Only Concentrically Braced Frames (TOCBF) exhibit deteriorating pinched hysteretic behaviour during strong earthquakes. Slender braces transit between an elastic buckling state, a restraightening state, in which they carry almost no load, an elastic tensile loading state as they are suddenly taut and, finally, a tensile yielding state. It has long been suspected that the sudden increase in tensile forces in the braces of TOCBSF creates detrimental impact loading on the connections and other structural elements. No experimental evidence, however, has been provided so far to confirm, or to quantify, this impact phenomenon. This paper addresses this issue through shake table tests of half scale, two-storey, TOCBF models. By normalizing the hysteresis loops of braces obtained from shake table tests to the yield strength of steel obtained from quasi-static tests, the increase in tensile forces in the braces was obtained. Results of dynamic tensile tests on steel coupons under similar strain rates as observed during the shake table tests showed that this increase in tensile forces is not the result of impact, but is rather caused by a yield strength increase of the steel under high strain rate. A procedure is proposed to estimate and account for this increase in tensile forces in the braces at the design stage.     

New formulae for capacity energy-based assessment of liquefaction triggering

Abstract

Liquefaction of loose saturated soil deposits is a hazardous type of ground failure occurring under earthquake excitations. Therefore, an accurate estimation of liquefaction potential is extremely important in geotechnical engineering. In the current study, a new model is proposed which estimates the level of strain energy needed for liquefaction initiation. A compiled database containing cyclic tests gathered from previously published works was used to develop new models to predict liquefaction potential. M5′ algorithm was used to find the best correlation between parameters. It was shown that not only the derived formulas are acceptably accurate but also they feature a very simple structure in comparison with available formulas in the literature. The proposed equations are accurate, physically sound and uncomplicated. Furthermore, safety factors were given for different levels of risk, which can be useful for engineering practice. In addition, the influence of different predictors on the liquefaction potential was evaluated and also the significance of input variables was assessed via sensitivity analysis. Finally, a new model was introduced for preliminary estimation of liquefaction potential.     

Dynamic characteristics of marine soft clay under variable phase difference and initial static shear stress

Abstract

Under seismic loading, the soil layer is subjected to multidirectional cyclic shear stress with different amplitudes and frequencies because of the coupling of multiple shear waves and the soil element within a slope or behind a retaining wall is subjected to initial static shear stress before subjected to cyclic loading. Due to the complexity of seismic loading propagation, a phase difference exists between the initial static shear stress and cyclic shear stress. To investigate the influence of the phase difference and initial static shear stress on cyclic shear strain, cyclic modulus, and cyclic strength, a series of laboratory tests are performed on Wenzhou marine soft clay by multi-directional simple shear system, which can simulate the actual state better by controlling the horizontal cyclic stress in the x and y directions simultaneously. As the phase difference varies from 0° to 90°, the dynamic shear modulus increases and cyclic strain accumulation decreases with an increasing number of cycles. The shear strain increases with the initial shear stress.     

Strain analysis of a seismically imaged mass‐transport complex,offshore Uruguay

Strain style, magnitude and distribution within mass‐transport complexes (MTCs) are important for understanding the process evolution of submarine mass flows and for estimating their runout distances. Structural restoration and quantification of strain in gravitationally driven passive margins have been shown to approximately balance between updip extensional and downdip contractional domains; such an exercise has not yet been attempted for MTCs. We here interpret and structurally restore a shallowly buried (c. 1,500 mbsf) and well‐imaged MTC, offshore Uruguay using a high‐resolution (12.5 m vertical and 15 × 12.5 m horizontal resolution) three‐dimensional seismic‐reflection survey. This allows us to characterise and quantify vertical and lateral strain distribution within the deposit. Detailed seismic mapping and attribute analysis shows that the MTC is characterised by a complicated array of kinematic indicators, which vary spatially in style and concentration. Seismic‐attribute extractions reveal several previously undocumented fabrics preserved in the MTC, including internal shearing in the form of sub‐orthogonal shear zones, and fold‐thrust systems within the basal shear zone beneath rafted‐blocks. These features suggest multiple transport directions and phases of flow during emplacement. The MTC is characterised by a broadly tripartite strain distribution, with extensional (e.g. normal faults), translational and contractional (e.g. folds and thrusts) domains, along with a radial frontally emergent zone. We also show how strain is preferentially concentrated around intra‐MTC rafted‐blocks due to their kinematic interactions with the underlying basal shear zone. Overall, and even when volume loss within the frontally emergent zone is included, a strain difference between extension (1.6–1.9 km) and contraction (6.7–7.3 km) is calculated. We attribute this to a combination of distributed, sub‐seismic, ‘cryptic’ strain, likely related to de‐watering, grain‐scale deformation and related changes in bulk sediment volume. This work has implications for assessing MTCs strain distribution and provides a practical approach for evaluating structural interpretations within such deposits.     

遥感监测下的渝东南小城镇镇区拓展特征探究

DUAN Songjiang     

基于局部回波幅值统计的海杂波背景下小目标检测

针对传统舰载雷达和岸基雷达很难检测出海杂波背景下小目标的现状,提出一种基于局部回波幅值统计的方法来检测海杂波背景下小目标.该算法基于数学统计思想:计算不同距离单元海杂波的幅值的最大值和标准偏差,分析发现距离单元含有小目标回波的最大幅值明显小于其它距离单元只含有海杂波回波的最大幅值,距离单元含有小目标回波的幅值的标准偏差明显大于距离单元只含有海杂波回波的幅值的标准偏差,因此可以在对小目标没有任何先验知识条件下,较准确地检测出海杂波背景下的小目标.实验证明,该算法是有效的.     

两个龙须菜新品系经济性状及琼胶特性的初步研究

2008年2～5月在广东省南澳县深澳海区对选育的龙须菜新品系07-1,07-2和对照组福建宁德栽培的981品系进行海上栽培比较试验,测定了3个品系的藻体日平均生长速率,试验了敌害生物(藻钩虾和团水虱)对3个品系的影响,比较了琼胶特性.结果显示,在水温11～20 ℃,盐度32.4～32.8的条件下,品系07-1,07-2的藻体日平均生长速率分别为3.8%/d和4.1%/d,宁德栽培品系的藻体日平均生长速率为3.2%/d.品系07-1,07-2的生长适应水温下限为16 ℃,比宁德栽培品系降低了2 ℃.与宁德栽培的981品系相比较,选育的龙须菜品系07-1,07-2对藻钩虾和团水虱有较强的耐受能力.品系07-1,07-2的琼胶含量比福建宁德栽培的981品系分别提高10.0%和14.4%,凝胶强度也分别提高了5.46%和14.5%,表明2个新品系具有潜在的推广应用价值.     

建筑桩基的有效应力地震反应分析：Ⅰ--计算方法

根据地震作用、上部结构、桩基的特点,建立了建筑桩基地震反应分析的计算模型,考虑了桩-土-上部结构的动力相互作用。然后将饱和土体视为由固、液二相组成的两相介质,基于Biot动力固结方程,提出一种建筑桩基地震反应的有效应力动力分析方法,并给出了具体计算步骤。