Third order contribution to the wave-making resistance of a ship at finite depth of water

This paper presents a potential based boundary element method for solving a nonlinear free surface flow problem for a ship moving with a uniform speed in finite depth of water. The free surface boundary condition is linearized by the systematic method of perturbation in terms of a small parameter up to third order. The surfaces are discretized into flat quadrilateral elements and the influence coefficients are calculated by Morino's analytical formula. Dawson's upstream finite difference operator is used in order to satisfy the radiation condition. The second order solution gives better result than the first or third order solution. So the present method with the second order solution can be adopted as a powerful tool for the hydrodynamic analysis of the thin ship in finite depth of water.     

思林水电站通航建筑物高边坡稳定分析和评价

应用ANSYS结构分析软件,模拟了思林水电站通航建筑物高边坡的地形、地质条件以及开挖的过程,建立边坡开挖的有限元计算分析模型,分析边坡在自然状态、分级开挖以及锚杆支护加固等工况下的应力、变形及其整体稳定性.定义单元的局部安全系数,得到了边坡开挖加固后稳定安全系数的分布.根据计算成果,指出现设计加固措施可以保证边坡稳定,无需增加其他工程措施.     

Stratigraphy and optically stimulated luminescence (OSL) dating of a Quaternary sequence along the Dong Nai River, southern Vietnam

The pre-Holocene Cenozoic sequence outcrops in the terrestrial part of the eastern margin of the Mekong Basin. However, the stratigraphy of the sequence is still unclear. Its detailed stratigraphy and chronology were therefore studied along the Dong Nai River, southern Vietnam, and the lithofacies and the relations among the formations were investigated from the outcrops. The ages of the deposits were determined by using optically stimulated luminescence (OSL) dating.The Ba Mieu Formation was deposited about 176±52 ka during marine isotope stage (MIS) 7–6. The Thu Duc Formation was deposited about 97±27 ka during MIS 5. Both the Ba Mieu and Thu Duc formations are composed of fluvial and tidally influenced coastal deposits. The newly proposed Nhon Trach Formation was originally an eolian (blanket) deposit, but it has been partly reworked by fluvial processes. The Nhon Trach Formation was deposited about 10.9±4.7 ka, in the last part of the Pleistocene to the beginning of the Holocene. The OSL ages for the Ba Mieu, Thu Duc, and Nhon Trach formations are younger than the ages previously assigned to these formations.     

Three-dimensional model and late stage warping of the Plattengneis Shear Zone in the Eastern Alps

The Plattengneis shear zone is a 250–600 m thick, flat lying, Cretaceous, eclogite facies, mylonitic shear zone, with north-over-south transport direction, that is exposed over almost 1000 km² in the Koralpe region along the eastern margin of the Alps. Although the shear zone is one of the largest in the Alps, its role in the Eoalpine metamorphic evolution and the subsequent exhumation of the region, remain enigmatic and its large-scale geometry is not well understood. The outcrop pattern suggests that the shear zone is made up of a single sheet that is folded into a series of open syn- and antiforms with wavelengths of about 10 km. Eclogite bodies occur above, within and below the shear zone and there is no metamorphic grade change across the shear zone. In the south, the fold axes strike east–west and plunge shallowly to the east. In the north, the fold axes are oriented in north–south direction and form a dome shaped structure of the shear zone. Total shortening during this late stage warping event was of the order of 5%. Indirect evidence constrains this folding event to have occurred between 80 and 50 Ma and the fold geometry implies that the final exhumation in the Koralpe occurred somewhat later than further north. Interestingly, the shear zone appears to strike out of the topography in the south and dip into the topography in the north, so that north of the shear zone only hanging-wall rocks are exposed and south of it only foot-wall rocks. Possibilities for the geometric relationship of the Plattengneis shear zone with the surrounding south dipping detachments are discussed.     

Performance of Mortar and Chemical Grout Injection into Surrounding Soil When Slurry Pipe-jacking Method is Used

Small-diameter shallow tunnels are often being built by using the slurry pipe-jacking method. This system involves the pushing or thrusting of a drivage machine and concrete pipes into the ground. Chemical grout injection into the surrounding soil around the tunnel is carried out after the drivage and pushing processes are finished. The purpose of the chemical grout injection is to maintain permanent stability of the surrounding soil. However, the behavior of the chemical grouting material in the surrounding soil around the tunnel and the amount of optimum injection is not clearly understood. From these points of view, this paper discusses the performance of the chemical grouting material, when it is injected into the surrounding soil around the tunnel, by means of 2-D Eulerian–Lagrangian seepage analysis. Moreover, the effectiveness of the chemical grout injection was evaluated by using the non-linear finite element method. This investigation show when the range of the grouted zone is designed; it is necessary that the relationship between Young’s modulus of the soil/grouted zone and the confining stress be taken into consideration in order to establish effective, economical and safe chemical grout injection system. Understanding the performance of the seepage/dispersion behavior of the chemical grout and the characteristics of soil/ grouted zone is also important.     

Monitoring of Over Cutting Area and Lubrication Distribution in a Large Slurry Pipe Jacking Operation

Slurry pipe jacking was firmly established as a special method for the non-disruptive construction of the underground pipelines of sewage systems. Pipe jacking, in its traditional form, has occasionally been used for short railways, roads, rivers, and other projects. Basically the system involves the pushing or thrusting of concrete pipes into the ground by a number of jacks. In slurry pipe jacking, during the pushing process, mud slurry and lubricant are injected into the face and the over cutting area that is between the concrete pipes and the surrounding soil. Next, the slurry fills voids and the soil stabilizes due to the created slurry cake around the pipes. Fillings also reduce the jacking force or thrust during operation. When the drivage and pushing processes are finished, a mortar injection into the over cutting area is carried out in order to maintain permanent stability of the surrounding soil and the over cutting area. Successful lubrication around the pipes is extremely important in a large diameter slurry pipe jacking operation. Control of lubrication and gaps between pipes and soil can prevent hazards such as surface settlement and increases in thrust. Also, to find voids around the pipes after the jacking process, in order to inject mortar for permanent stabilizing, an investigation around the pipes is necessary. To meet these aims, this paper is concerned with the utilization of known methods such as the GPR (Ground Penetrating Radar) system and borehole camera to maintain control of the over cutting area and lubricant distribution around the pipes during a site investigation. From this point of view, experiments were carried out during a tunnel construction using one of the largest cases of slurry pipe jacking in Fujisawa city, Japan. The advantages and disadvantages of each system were clarified during the tests.     

Geolord-AT空三加密软件处理数码航片的方法

在Geolord-AT空三加密软件中对数码航片进行框标定向的前期处理，创建带有框标的数码航片或者直接创建内定向的＊．kb文件，使数码航片顺利按要求通过内定向。     

塔里木盆地阿克库勒地区石炭系卡拉沙依组成岩作用

阿克库勒地区卡拉沙依组碎屑岩储层的成分成熟度和结构成熟度均较低．储层的次生溶蚀孔隙所占比例远高了：原生孔隙，次生孔隙是储层的主要储集空间．样品数据统计显示，卡拉沙依组储层属于低孔、低渗储层类型．根据岩石薄片、铸体薄片观察及储层样品的扫描电镜和阴极发光分析结果，本区石炭系储层主要经历的成岩作用有压实（压溶）作用、胶结作用、溶蚀作用和交代作用，其中碳酸盐矿物的沉淀和溶蚀作用是本区卡拉沙依组储层所经历的最重要的成岩作用．成岩作用已达到晚成岩B期，早期方解石交代石英颗粒并发生大量溶蚀，生成大量次生孔隙，晚期方解石没有发生溶蚀．     

山东车镇凹陷东部古近系沙河街组成岩作用

车镇凹陷沙河街组的沉积体系受控于盆地内的构造、物源供给以及沉积时的气候环境。以岩石学特征为基础，描述了成岩过程中压实与压溶作用、胶结作用、溶解作用与次生孔隙的特征，以及次生孔隙带在本区的分布。论述了碳酸盐胶结物与粘土矿物胶结作用的特点。粘土矿物蒙脱石-伊利石转变具有明显的渐变与突变交替的演化程式，其演化经历了蒙脱石带、渐变带、迅速转化带和伊利石带以及蒙脱石向伊利石的转变带。沙河街组的成岩作用划分为早期成岩阶段（A期、B期）和晚期成岩阶段（A期、B期、C期），并提出了成岩阶段的划分标志。     

泌阳凹陷安棚油田深层系成岩作用研究及其在成岩圈闭预测中的应用

深层系一般指沉积盆地中埋藏深度在2 500～2 700 m以下的地层,其储集物性普遍很差,但在一定条件下,深部溶蚀作用可产生优质储层,形成成岩圈闭.然而这种成岩圈闭的预测一直是一个难题.安棚油田位于河南泌阳凹陷东南部,勘探成果表明,在该油田深层系下第三系核桃园组核三段下部(简称(核三下)席状的扇三角洲砂体中存在成岩圈闭.本次通过定量的成岩作用研究和成岩阶段划分,对成岩圈闭的形成机理和分布进行了探讨.研究表明,该区核三下的砂体经历了压实、胶结、溶蚀等多种成岩作用,不同的成岩作用发生于不同的埋藏深度.2 700～3 100 m之间以胶结强烈为特征,属于胶结带.3 100～3 900 m之间以次生溶蚀孔隙发育为特征,尤其是3 200～3 600 m之间, 属于深部溶蚀带.本区核三下砂体自南而北埋藏深度逐渐变浅,其上倾方向处于胶结带的部分由于强烈胶结而变成致密层,可封堵油气,而下倾方向处于溶蚀带的部分由于次生溶蚀孔隙发育而成为良好储层,从而形成成岩圈闭.根据不同埋藏深度、不同成岩阶段孔隙发育和保存的特征,可预测成岩圈闭分布。