提高钻孔桩桩底压浆工效及保证质量的技术措施

钻孔桩桩底压浆技术是向钻孔灌注桩桩底沉渣和围岩土体内压入一定量水泥浆,使桩底沉渣和桩底一定范围土体孔隙内充满水泥浆液,经物理、化学作用使其强度大幅提高,从而实现单桩竖向承载力的提高。结合高铁钻孔桩桩底压浆施工实践,介绍了2种压浆工艺过程,阐明了提高压浆工效、保证注浆质量关键技术措施实施的重要性。     

高浓度化学浆液的研制与应用效果

淮北某煤矿因第四含水层水量过大,通过F5断层导入采煤工作面,使采煤生产陷入停顿。为解决采煤工作面涌水量过大问题,研制了高浓度化学浆液,经钻孔注浆收到良好的止水效果,使近200万t煤炭资源恢复开采,取得了很好的经济和社会效益。     

水泥浆护壁堵漏若干问题的探讨

水泥浆护壁堵漏是目前钻探施工中广泛应用的技术措施之一。在水泥浆护壁堵漏施工中,因各种原因致堵漏失败,根据水泥浆护壁堵漏失败的原因,从灌注工艺方面探讨提高水泥浆护壁堵漏的效果和预防孔内事故的发生应特别注意的若干问题。     

粉煤灰——漂珠复合低密度水泥浆固井试验与应用

针对吴起地区固井中一些低压地层由于破裂压力低,不能承受常规水泥浆液柱压力,出现固井水泥浆漏失、水泥返高达不到设计要求的问题,开展了低密度水泥浆体系研究。通过室内试验,对减轻材料粉煤灰、漂珠及二者复合体系进行了较系统的研究,确定了适合的配方。研究选用增稳剂ZW 加入低密度体系,提高了低密度水泥的强度。实验结果及现场实践表明: 用减轻材料配制低密度水泥浆及降低水泥浆液柱压力,是确保低压易漏地层固井水泥浆返高的有效途径,对提高固井质量和延长油井寿命都将起到积极作用。     

淮南市朱集东矿井新生界松散层地下水开采保证程度评价

利用淮南市朱集东矿井新生界松散层供水水文地质勘探成果和抽水试验资料,查明了区内新生界松散层供水含水层的供水水文地质条件,认为第一含水层埋藏浅,易受污染,水量随季节变化大,不宜作为生活饮用水供水水源,第三含水层水质较差,亦不作为生活饮用水供水水源,确定了第二含水层为矿区主要供水层位。采用解析法对第二含水层的水量进行了计算,并设计了布井方案,计算了井群水量;水位预报结果表明,开采50a后,3#、4#井中的水位最大降深为35.229m,小于其顶板埋深,说明拟建井群布置是合适的。评价结果为矿井供水设计提供了依据。     

Early Devonian synorogenic alluvial-fan deposits of the Maccullochs Range,western New South Wales

The Early Devonian, Maccullochs Range beds (new) of the Winduck Interval largely comprise non-marine fine-grained sheet-flood-deposited sandstones which lie in the southeast sector of the Darling Basin Conjugate Fault System. Deposition of the >2.5 km-thick sequence occurred on the Wilcannia, Towers and Coolabah Bore alluvial fans, that were sourced largely from lightly indurated sandstone caps overlying a large basement high lying north of the Darling River Lineament, and also from west of Maccullochs Range (Coolabah Bore Fan). Four lithofacies are recognised. Lithofacies 1, massive sandstone, is proximal and was deposited from hyperconcentrated sheet floods. The more distal lithofacies 2 is partly massive, partly laminated and partly affected by soft sediment slumping during its deposition. It contains 1.3 – 3.5 m-thick sheet-flood successions that rarely show cross-bedding. Lithofacies 3 and 4 are minor: lithofacies 3, stream-flood deposited, comprises coarse-grained, pebbly sandstone and lithofacies 4, transient playa lake deposits that are locally intercalated with lithofacies 2. In lithofacies 2, thick massive fine-grained sandstone is commonly overlain by laminated sandstone that was deformed when soft. Incised channel deposits in lithofacies 2 deposits are rare and palaeosols were not discovered. Permanency of the positions of two of the alluvial fans, and by inference their feeder streams, remained unchanged for ～9 million years. The fans overlie probable floodplain deposits observed in a quarry in the easternmost part of the study area. Marine fossils are very minor in the range—the brachiopod Howellella jaqueti at one locality indicates an Early Devonian age for one of the brief marine incursions into what was normally an alluvial-fan environment. Very brief marine incursions elsewhere in the group are deduced from the presence of very rare fossil gastropods.     

Syngenetic gold in western Victoria: occurrence,age and dimensions

In western Victoria, a widespread stratiform style of gold enrichment in Palaeozoic black mudstone and chert—clearly different from the classic mesothermal quartz vein deposits of the Victorian goldfields—has been confirmed by whole-rock geochemistry and Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICPMS). This enrichment pre-dates compaction, deformation and low-grade metamorphism of the sedimentary host-rocks, and therefore possibly developed diagenetically during slow deposition of the thin carbonaceous black mudstone beds and the thinner layers of chert. These paired strata have been documented at many locations in three regional outcrop areas of chevron-folded Cambrian and Lower Ordovician metasediments in the Stawell and Bendigo Zones, where they are interbedded with quartz-rich turbidites. The layers were named ‘indicators’ by the early miners, who found locally rich nuggety gold deposits at intersections between these layers and mesothermal quartz veins. Gold is present in euhedral pyrite crystals in both black shale and chert. LA-ICPMS analysis of individual pyrite crystals in the indicator beds shows that pyrite is enriched in Au, As, Sb, Se, Te and Bi. The Au content of pyrite varies from 0.03 to 2.69 ppm with a mean of 0.58 ppm and shows a positive correlation with As, which varies from 1000 to 6000 ppm. Many pyrite crystals show enrichment of gold in their cores and depletion in their rims, confirming the likely syngenetic or syndiagenetic accumulation of gold during pyrite formation in the sediments. Prior to regional metamorphism, folding and faulting, the many indicator strata in the outcrop areas were parts of an extensive marine sequence of Late Cambrian and Early Ordovician age. The former primary source of this mineralisation is considered to have been one or more contemporaneously exhalative submarine hydrothermal systems. Thus, the older Palaeozoic sediments of the western Lachlan Fold Belt were significantly enriched in syngenetic gold in the Early Palaeozoic, at least 40 million years before emplacement of the quartz – gold vein deposits of the goldfields.     

内蒙古银额盆地额济纳旗赛汉陶来地区石炭系 —二叠系煤层的发现及其意义

在对赛汉陶来地区19口石油及煤田钻井地层岩性组合特征分析的基础上,总结了中生代不同构造单元的地层分布特征、含煤层段岩性特征及煤岩物理化学特征。含煤层段岩性组合为沉火山碎屑岩或再搬运的沉火山岩、泥岩夹煤层,具有典型裂谷盆地沉积特征。该套地层横向分布稳定,不同构造单元之间可进行对比,单井平均可采煤层的厚度为4.77m。煤岩演化程度较低,为不粘煤。含煤层段沉火山角砾岩获得的锆石年龄为295.0Ma±1.3Ma~303.4Ma±2.8Ma,对应地层为上石炭统—下二叠统干泉组。银额盆地赛汉陶来地区石炭系—二叠系含煤地层的发现不仅指示了良好的煤炭资源前景,并且对石炭纪—二叠纪盆地构造演化、沉积体系,以及石炭系—二叠系沉积埋藏史等基础地质问题的研究具有重要意义。     

地源热泵系统中水泥基灌浆材料性能优化

分别考察了水灰比、砂灰比、粗钢渣代砂率、钢渣粉代水泥率和泥浆掺入率对灌浆材料的工作性能、导热性能和固结强度的影响.研究结果表明:在未加废钢渣(包括粗钢渣和钢渣粉)前提下,若水灰比为0.55 ～0.6、砂灰比为2～2.2时,灌浆材料的综合性能最好;若单独用粗钢渣替代砂,单独用微米级钢渣粉替代水泥,并且粗钢渣代砂率和钢渣粉代水泥率分别控制在40％和20％以内时,便能保证灌浆材料良好的综合性能;增大泥浆掺入率可提高灌浆材料的工作性能,但会降低其导热性能和固结强度,因此泥浆掺入率需控制在10％以内才能保证灌浆材料有足够的导热性能和固结强度.结果表明,工业废弃物的再利用,可为地源热泵工程节约24.84％的原材料成本.     

Water‐worked gravel beds in laboratory flumes – a natural analogue?

An investigation has been conducted to identify the key parameters that are likely to scale laboratory sediment deposits to the field scale. Two types of bed formation were examined: one where sediment is manually placed and screeded and the second where sediment is fed into a running flume. This later technique created deposits through sequential cycles of sediment transport and deposition. Detailed bed surface topography measurements have been made over a screeded bed and three fed beds. In addition, bulk subsurface porosity and hydraulic conductivity have been measured. By comparing the four beds, results revealed that certain physical properties of the screeded bed were clearly different from those of the fed beds. The screeded bed had a random organization of grains on both the surface and within the subsurface. The fed beds exhibited greater surface and subsurface organization and complexity, and had a number of properties that closely resembled those found for water‐worked gravel beds. The surfaces were water‐worked and armoured and there was preferential particle orientation and direction of imbrication in the subsurface. This suggested that fed beds are able to simulate, in a simplified manner, both the surface and subsurface properties of established gravel‐bed river deposits. The near‐bed flow properties were also compared. It revealed that the use of a screeded bed will typically cause an underestimation in the degree of temporal variability in the flow. Furthermore, time‐averaged streamwise velocities were found to be randomly organized over the screeded bed but were organized into long streamwise flow structures over the fed beds. It clearly showed that caution should be taken when comparing velocity measurements over screeded beds with water‐worked beds, and that the formation of fed beds offers an improved way of investigating intragravel flow and sediment–water interface exchange processes in gravel‐bed rivers at a laboratory scale. Copyright © 2008 John Wiley & Sons, Ltd.