Stability of outer planetary orbits around binary stars: A comparison of Hill's and Laplace's stability criteria

A comparison is made between the stability criteria of Hill and that of Laplace to determine the stability of outer planetary orbits encircling binary stars. The restricted, analytically determined results of Hill's method by Szebehely and co-workers and the general, numerically integrated results of Laplace's method by Graziani and Black are compared for varying values of the mass parameter =m ₂/(m ₁+m ₂). For 00.15, the closest orbit (lower limit of radius) an outer planet in a binary system can have and still remain stable is determined by Hill's stability criterion. For >0.15, the critical radius is determined by Laplace's stability criterion. It appears that the Graziani-Black stability criterion describes the critical orbit within a few percent for all values of .     

涠西南地区岩石特性及钻井液技术研究

北部湾盆地涠西南油田群是南海西部重要的原油产区，同时油田群紧邻众多国家级自然保护区，属于环境敏感区域。针对北部湾盆地涠西南地区环保要求，以及涠洲组和流沙港组钻井过程经常出现井壁失稳导致的憋卡、起下钻阻卡等问题，开展了涠西南地区地层泥页岩特性及环保钻井液技术研究。通过地层岩石黏土矿物分析、孔喉结构分析以及理化性能评价，明确了涠西南地区泥页岩井壁失稳的机理；提出以类油基的水溶性复合基基液为核心，构建了一套具有油基钻井液工程特性和水基钻井液环保特性的新型环保防塌钻井液技术，并进行了相关的现场应用。现场应用显示：应用井与邻井相比，12-1/4″井段阻卡划眼时间减少，井径扩大率大幅度降低，并且在128 h的长时间浸泡过程中没有复杂情况产生，有效地解决了涠洲组、流沙港组易失稳地层的井壁稳定问题；同时，钻井液环保性能达到一级海域环保要求，可以替代目前应用的油基钻井液体系，解决了海上使用油基钻井液存在配制成本高、含油钻屑需全回收及环境危害隐患大等技术难题。该研究对于涠西南油田环保、井壁失稳和钻井液技术发展具有较高的理论价值和借鉴意义。     

Nutrient-chlorophyll trajectories across trophic gradients

We estimate the response of chl-a (mg · m^–3) to changes in concentrations of total phosphorus (TP) by calculating the slopeS = chl-a/TP in chl-a =f(TP) graphs. Results show that in years where algae are P-limited oligotrophic lakes respond less (median slope 0.21) to changes in nutrient concentrations than eutrophic lakes, (median slope 0.31) and these again less than hypereutrophic lakes, (median slope 1.02). We find no saturation value for the slope within the TP range considered (6–480 mg · m^–3). Chl-a in eutrophic lakes responds more frequently to non-nutrient factors than oligotrophic and hypereutrophic lakes. Results obtained by replacing TP with a new nutrient parameter, TP = 0.056 · TP · IN^0.226, in which inorganic nitrogen, IN, is factored in, suggest that nitrogen has an influence on chl-a in oligotrophic lakes. Blue-green algae respond less to changes in TP than other algal species, e.g., diatoms.     

The influence of a flood event on phytoplankton succession

The effect of the August 1987 River Reuss flood event on the phytoplankton biocoenosis in Lake Uri (Urnersee, part of Lake Lucerne, Switzerland) was investigated firstly by comparing biological, chemical and physical data sampled before the event with equivalent data sampled after the event; and secondly by comparing the phytoplankton succession in 1987 with that occurring in the floodfree year 1989. As a consequence of the flood, the physical and chemical environment of the phytoplankton was found to have undergone a change which resulted in an alteration in the composition of the phytoplankton community. The phytoplankton community existing previous to the flood event, which had been dominated byTabellaria fenestrata sensu Husted 1930 (K-strategist), was replaced by a biocoenosis characterized mainly by various species of flagellates, which represent a typical spring successional stage (r-strategists). After the externally-imposed perturbation, the return to stable physical and chemical conditions was followed by the re-establishment of the successional stage which had existed before the flood (termed reversion by Reynolds, 1980).     

Chemical aspects of iron oxide coagulation in water: Laboratory studies and implications for natural systems

Initial coagulation rates of colloidal hematite (-Fe₂O₃) particles (diameter less than 0.1 µm) were measured experimentally in well-defined laboratory systems at constant temperature. The relative stability ratio,W, was obtained at various ionic strengths in NaCl medium and at pH values in the range from 3 to 12. ExperimentalW values ranged from 1 to 10⁴ in various systems. The results delineate the roles ofspecific andgeneralized coagulation mechanisms for iron oxides. Among the specifically-interacting species (G _ads ⁰ >G _coul ⁰ ) studied were phosphate, monomeric organic acids of various structures, and polymeric organic acids. The critical coagulation-restabilization concentrations of specifically-interacting anions (from 10^–7 to 10^–4 molar) can be compared with the general effects of non-specific electrolyte coagulants (10^–3 to 10^–1 molar). The laboratory results are interpreted with the help of a Surface Complex Formation/Diffuse Layer Model (SCF/DLM) which describes variations of interfacial charge and potential resulting from variations of coagulating species in solution. Comparison of these laboratory experiments with observations on iron behavior in estuarine and lake waters aids in understanding iron removal mechanisms and coagulation time scales in natural systems.     

Interactive effects of the type of milling media and CuSO4 addition on the flotation performance of sulphide minerals from Merensky ore Part II: Froth stability

The limitations of pulp chemistry measurements in the flotation of a platinum group mineral (PGM) bearing Merensky ore were demonstrated in Part 1 of this article. In this paper the importance of the contribution of the froth structure due to changing froth stability is analysed using the batch flotation data. The effects of mild steel (MS) and stainless steel (SS) milling media and the addition of copper sulphate on the flotation performance of the sulphide minerals in Merensky ore have been evaluated in relation to the changes in stability of the froth phase. The effects of pulp chemistry and froth stability on the flotation of sulphide minerals were distinguished by using two different rate constants (k_t and k_w). The rate constant (k_w) calculated as a function of cumulative water recovery was used to describe characteristics of froth phase and k_t was calculated as a function of flotation time. The results revealed that the type of grinding media and copper sulphate addition had an interactive effect on the froth stability. While mild steel (MS) milling increased the froth stability due to the presence of hydrophilic iron hydroxides and colloidal metallic iron, the addition of copper sulphate reduced the stability, especially with stainless steel (SS) milling. Copper sulphate addition had a dual role in the flotation of Merensky ore in that it caused destabilisation of the froth zone as well as activation of selected sulphide minerals. The dominant effect was found to depend on the type of milling media and floatability of the mineral in question and this work has demonstrated the importance of using a combination of measurements to evaluate flotation performance holistically.     

Strength and stability of frictional sliding of gabbro gouge at elevated temperatures

To investigate the strength of frictional sliding and stability of mafic lower crust, we conducted experiments on oven-dried gabbro gouge of 1 mm thick sandwiched between country rock pieces (with gouge inclined 35° to the sample axis) at slip rates of 1.22 × 10^− 3 mm/s and 1.22 × 10^− 4 mm/s and elevated temperatures up to 615 °C. Special attention has been paid to whether transition from velocity weakening to velocity strengthening occurs due to the elevation of temperature.Two series of experiments were conducted with normal stresses of 200 MPa and 300 MPa, respectively. For both normal stresses, the friction strengths are comparable at least up to 510 °C, with no significant weakening effect of increasing temperature. Comparison of our results with Byerlee's rule on a strike slip fault with a specific temperature profile in the Zhangbei region of North China shows that the strength given by experiments are around that given by Byerlee's rule and a little greater in the high temperature range.At 200 MPa normal stress, the steady-state rate dependence a − b shows only positive values, probably still in the “run-in” process where velocity strengthening is a common feature. With a normal stress of 300 MPa, the values of steady-state rate dependence decreases systematically with increasing temperature, and stick-slip occurred at 615 °C. Considering the limited displacement, limited normal stress applied and the effect of normal stress for the temperatures above 420 °C, it is inferred here that velocity weakening may be the typical behaviour at higher normal stress for temperature above 420 °C and at least up to 615 °C, which covers most of the temperature range in the lower crust of geologically stable continental interior. For a dry mafic lower crust in cool continental interiors where frictional sliding prevails over plastic flow, unstable slip nucleation may occur to generate earthquakes.     

预应力锚索在公路高陡边坡加固整治工程中的应用

预应力锚索锚固技术以其结构合理、工艺灵巧、适应性广、施工速度快、造价低等优势，目前已广泛应用于各工程领域。在桂（林）—柳（州）高速公路高边坡加固工程中采用了该项技术，经过近1年的运转表明，效果良好。对该项工程作了详细讨论，介绍了边坡的地质条件、稳定性分析和设计参数的选取，总结了施工中锚索的造孔、下索、注浆、张拉锁定等设计及施工要点。     

复合土钉墙支护技术在某大型软土基坑围护中的应用

根据拟建建筑基坑的工程地质条件、周边环境条件、基坑开挖深度等特点综合考虑，对基坑分段采用超前微型桩支护加土钉墙、放坡加土钉墙2种复合支护方案。实践证明，该工程所采用的多种复合式支护实施方案，技术安全可靠，经济合理。     

广州科学城保利林语山庄高边坡支护工程的实践

主要介绍了广州科学城保利林语山庄高边坡支护设计方案与施工方法。支护方案综合采用了锚索、锚杆、抗滑桩、钢管桩、格构梁及挡土墙等多种支护方法，有效地提高了边坡的稳定性。应用有限元方法来验证设计方案的合理性，模拟结果与工程实践基本吻合。