浅层地震探测的可控震源信号设计

在工程与环境物探中,浅层地震探测是一种常用的高分辨率物探方法,但是这种方法使用的炸药震源和枪击震源破坏力大,对人和建筑物都有危害,因而被禁止在人口稠密的地区使用．因此,无公害的电磁驱动可控震源技术得到了发展和应用．利用扫描信号压缩技术,小能量弹性波Chirp信号可持续向地下发送,不损害地面和建筑物,对人群也没有影响,是一种较理想的城市浅层地震震源．本文介绍了电磁驱动可控震源的信号设计方法,并简要介绍了具有波束定向能力的相控震源的设计思想．     

Comparison of seismic actions and structural design requirements in Chinese code GB 50011 and international standard ISO 3010

This paper presents a comparison between the Chinese Code GB50011-2001 and the International Standard ISO3010: 2001(E), emphasizing the similarities and differences related to design requirements, seismic actions and analytical approaches. Similarities include: earthquake return period, conceptual design, site classification, structural strength and ductility requirements, deformation limits, response spectra, seismic analysis procedures, isolation and energy dissipation, and nonstructural elements. Differences exist in the following areas: seismic levels, earthquake loading, mode damping factors and structural control.     

A simplified methd of evaluating the seismic performance of buildings

This paper presents a simplified method of evaluating the seismic performance of buildings. The proposed method is based on the transformation of a multiple degree of freedom (MDOF) system to an equivalent single degree of freedom (SDOF) system using a simple and intuitive process. The proposed method is intended for evaluating the seismic performance of the buildings at the intermediate stages in design, while a rigorous method would be applied to the final design. The performance of the method is evaluated using a series of buildings which are assumed to be located in Victoria in western Canada, and designed based on the upcoming version of the National Building Code of Canada which is due to be published in 2005. To resist lateral loads, some of these buildings contain reinforced concrete moment resisting frames,while others contain reinforced concrete shear walls. Each building model has been subjected to a set of site-specific seismic spectrum compatible ground motion records, and the response has been determined using the proposed method and the general method for MDOF systems. The results from the study indicate that the proposed method can serve as a useful tool for evaluation of seismic performance of buildings, and carrying out performance based design.     

山体滑坡的综合防治措施在渝怀线古城南平山的应用研究

对于渝怀线古城南平山路堑边坡所发育山体滑坡形成的地貌条件、岩石条件、构造条件气候条件以及施工技术条件进行了初步的分析与研究,根据先期发生的小型山体滑坡,从地质学的角度进行了研究,并结合现场的实际情况,综合对比了几种治理措施的优劣,提出了较好的治理方案.     

二维EMD 方法在微尺度波斜率波数谱提取中的应用

进行海面微尺度波频率分析时,为消除重力波影响,引入二维 EMD(经验模态分解)方法滤除造成频率混叠的长重力波,然后进行傅立叶变换,得到海面微尺度波谱,进一步处理得到斜率波数谱。斜率波数谱提取结果表明：采用二维EMD方法可以有效滤除图像中混叠的长波信息,在此基础上进行微尺度斜率波谱计算的结果与国外已有结果基本一致。文中还将二维 EMD 方法与小波方法的处理结果进行了比对,结果表明在滤除长波的影响时,二维EMD方法具有其较明显的优势。     

Automatic tracing of the foot of the continental slope

The UNCLOS III (Article 76, Section 4(b)) defines the foot of the continental slope as the point of maximum change in the gradient at its base. It is impossible to locate so defined afoot and thus to trace the foot‐line objectively by eye. In this study we show a method designed automatically to detect and trace the foot‐line of the continental slope from an irregular array of bathymetrical data. Our algorithm first transforms the bathymetric surface to a maximum curvature surface. On this new surface, the foot‐line corresponds to one of the ridges; instead of tracing the foot‐line on the bathymetric surface, we now can trace the ridges on the maximum curvature surface. The tracing of the ridges can be done automatically and objectively and the foot‐line is identified as being one of these ridges. We devote particular attention to the case when the ridge‐line is not defined, i.e., to the case when the point of maximum gradient change becomes a region of maximum gradient change.     

Reliability analysis of soil nail internal limit states using default FHWA load and resistance models

Abstract

Reliability analyses of nail pullout, nail-in-tension, and system reliability of internal limit states are presented for both permanent and temporary soil nails that are designed using default Federal Highway Administration nail load and resistance models within traditional deterministic allowable stress design (ASD) framework. The model uncertainty, correlations between soil strength parameters, between model factor, and nominal load term, and between the two internal limit states, and influence of model factor fittings are all addressed in the analyses. This study provides a general idea of the reliability that is implicitly embedded in current ASD-based soil nail internal limit state designs.     

Geotechnical characterization of slump scars,eroded slopes,and correlated deposits on continental margins: Gulf of Lions,Western Mediterranean sea

Abstract

Vertical variations of geotechnical properties in the uppermost sediment layers characterize the main sedimentary processes acting on the construction and destruction of progressive‐type continental slopes. In the Gulf of Lions, the original thicknesses and distribution of the uppermost sedimentary layers of the continental slope and rise, which consist of Holocene muds overlying Pleistocene muds, have been greatly modified by erosion and several kinds of slope failure processes. Each process is typified through sets of geotechnical properties measured in the eroded or slumped sections and in the associated sediment accumulations.

In slump scars, the water‐rich Holocene muds lie on fine, overconsolidated, Pleistocene muds with high plasticity and low shear strength. In bottom current‐eroded slopes, where modern sedimentation is extremely reduced, the Pleistocene muds frequently outcrop and may sometimes be overlain by a very thin layer of Holocene muds. The Pleistocene muds of eroded slopes are overconsolidated and more silty and less plastic than the Pleistocene muds from slopes affected by slope failure, their shear strength being 10 times greater.

Deposits at the toe of slumps are very often formed by several superposed three‐layer units (triplets of interstratified Holocene, transitional, and Pleistocene layers) issued from retrogressive slumping occurring in the slump scars above their head area. The main body of each layer is then relatively undisturbed, showing the usual burial geotechnical gradients due to overburden pressure (i.e., decrease of water content and increase of unit weight and shear strength). At the toe of bottom current‐eroded slopes, a thick and homogeneous layer of Holocene muds overlies the Pleistocene muds; this Holocene layer has unappreciable burial depth gradient of its geotechnical parameters because of a high rate of modem and continuous deposition.     

Wave‐induced pore pressure in relation to ocean floor stability of cohesionless soils

One of the important geotechnical considerations for many engineering installations, such as pipelines and anchors, in an oceanic environment involving sand deposits is that of potential ocean floor instability due to the development of high pore pressures caused by the direct action of waves. This article presents a procedure for evaluating the magnitude and distribution of wave‐induced pore pressures in ocean floor deposits. The method takes into account the distribution of wave‐induced pore pressures in ocean floor deposits. The method takes into account the distribution of cyclic shear stresses in the soil profile as well as the important factor of pore‐pressure dissipation. The variation of properties within the soil profile can also be easily incorporated into the analytical procedure. The analysis provides the complete time history of pore‐pressure response and shows clearly that failure to include the pore‐pressure dissipation effects would lead to radically conservative design. The results also provide a basis for designing remedial measures, if required, to avert the development of high pore pressures and their deleterious effects.     

Oceanic exchange variability across the continental slope west coast,South Island,New Zealand

Current observations taken at depths between 630 and 830 m from the west coast South Island continental slope exhibit one‐ to four‐weekly periodicities superimposed on the semi‐diurnal tide. These variable flows at 630 m and otter large, longer‐timescale events have a significart onshore/offshore component of flow which leads to a similar transport of alongshore momentum and heat.