Sliding fragility of block‐type non‐structural components. Part 1: Unrestrained components

Motivated by the development of performance‐based design guidelines with emphasis on both structural and non‐structural systems, this paper focuses on seismic vulnerability assessment of block‐type unrestrained non‐structural components under sliding response on the basis of seismic inputs specified by current seismic codes. Two sliding‐related failure modes are considered: excessive relative displacement and excessive absolute acceleration. It is shown that an upper bound for the absolute acceleration response can be assessed deterministically, for which a simple yet completely general equation is proposed. In contrast, fragility curves are proposed as an appropriate tool to evaluate the excessive relative displacement failure mode. Sample fragility curves developed through Monte‐Carlo simulations show that fragility estimates obtained without taking into account vertical base accelerations can be significantly unconservative, especially for relatively large values of the coefficient of friction. It is also found that reasonable estimates of relative displacement response at stories other than the ground in multistorey buildings cannot in general be obtained by simply scaling the ground acceleration to the peak acceleration at the corresponding storey. Failure modes considered in this study are found to be essentially independent of each other, a property that greatly simplifies assessment of conditional limit states. Copyright © 2002 John Wiley & Sons, Ltd.     

A procedure for evaluating seismic energy demand of framed structures

Energy serves as an alternative index to response quantities like force or displacement to include the duration‐related seismic damage effect. A procedure to evaluate the absorbed energy in a multistorey frame from energy spectra was developed. For low‐ to medium‐rise frames, it required a static pushover analysis of the structure to determine the modal yield force and ductility factor of an equivalent single‐degree‐of‐freedom system for the first two modes. The energy spectra were then used to determine the energy contribution of each mode. A procedure was also developed to distribute the energy along the frame height based on energy shapes. This study showed that the second‐mode response in some cases needs to be considered to reflect the energy (or damage) concentration in the upper floors. Copyright © 2002 John Wiley & Sons, Ltd.     

Observing artificially induced strain: implications for subglacial deformation

By analysing a series of four successive thin‐sections from a ceramic clay that was subjected to uniaxial compression, we were able to monitor the development of microstructures in a fine‐grained sediment. The artificially induced microstructures, such as unidirectional clay reorientations and linear and circular grain arrangements, are identical to features that have been observed in thin‐sections of subglacially deformed tills, and therefore may be used as representative analogues. We argue that the structures, reflecting slip, planar shear displacements as well as rotational movements, can be explained by assuming a Coulomb‐plastic response to imposed shear. We conclude that sediments subjected to subglacial deformation behave as Coulomb materials, at least during the final stages of the deformation. The present study bridges the gap between field studies, experimental studies and theoretical modelling. The microscopic observations assist in visualising inferred subglacial processes and facilitate up‐ and downscaling between diverse methodological approaches. Copyright © 2003 John Wiley & Sons, Ltd.     

三峡库区云阳新城水平层状岩体高边坡变形破坏主要控制因素

本文对三峡库区云阳新城一些高边坡的勘察成果进行了总结,目的在于了解云阳新城区近水平岩层条件下边坡变形破坏的型式、主要控制因素及支护要点。结果表明,云阳新城高边坡普遍存在表层剥落现象,含膨胀性矿物(主要是伊利石和绿泥石)的泥质岩较快速风化作用是造成边坡表层剥落式渐进性破坏的主要原因;沿卸荷裂隙与泥化夹层的崩滑是边坡失稳的主要型式,但边坡之间崩滑失稳的程度存在较大差异,一些边坡存在相对较为强烈的卸荷及边坡失稳问题,主要归因于其存在与边坡近于平行的构造裂隙。认为及时进行护坡并在工程设计中考虑结构面的存在型式是边坡防护的重点。     

Risk analysis of landslides – A case study

The effects of uncertainty due to the variability of soil parameters on the risk of landsliding in the Himalayan region are investigated using a random field model combined with slope stability analyses. Effects of spatial variability both in horizontal and vertical directions, number of test samples, variations in piezometric level and the influence of earthquake on the reliability of a typical slope in a slide area are investigated. The results show that the reliability of slopes in the slide area is significantly affected by the coefficients of variation of soil parameters, spatial variations of soil parameters, number of test samples and piezometric variations. The results also show that the assumption of isotropic variations to assess slope reliability isconservative. The results of the study are useful in providing guidelines and pointing to remedial measures in the form of sub-surface drainage to improve slope reliability in the area.     

岩体边坡工程中的位移监测及分析

边坡工程的监测取决于监测人员对岩(土)体介质的认识程度和选择相应的方法和手段。通过对江西德兴铜矿大山村选矿厂东部边坡和北部楔形地质结构体稳定状况的监测,阐述了在边坡工程中位移监测的应用及有关分析。     

洪家渡水电站左坝肩高边坡稳定及加固措施研究

贵州洪家渡水电站左坝肩高边坡开挖高度310 m,采用弹塑性有限元数值模拟方法对左坝肩高边坡施工期岩体应力应变状态进行分析研究,并结合现场变形观测资料对计算结果进行验证,从而对左坝肩高边坡的稳定性进行评价并提出相应的加固措施。     

小湾电站高边坡系统锚固与排水的优化设计方法

据小湾电站地下厂房进水口开挖高边坡的岩体结构与工程地质特征,采用基于结构面网络模拟的随机楔体稳定分析方法对边坡的稳定性进行了三维分析。进一步运用风险分析理论对边坡系统锚杆与预应力锚索的布置进行了优化设计,最后运用结构面网络模拟理论对排水方案进行了优化设计。     

兴山县龙王嘴边坡稳定性分析与加固设计

龙王嘴边坡系坡高达70 m、坡角达70 °的高陡岩质边坡。分析了宜-秭公路石峡段龙王嘴高边坡变形的地质条件,在定量评价龙王嘴高边坡稳定性的基础上,进行了该高边坡的施工图加固设计。根据其特点将350 m长的坡段分为A,B,C三个区,分别采取预应力锚索与锚杆加固、挂网喷射混凝土支护和喷射混凝土支护等措施,实践证明,工程治理效果良好。     

边坡及其它类工程地质问题研究

本文提出有关边坡工程地质研究方面的一些新概念，看法和问题，并概述了属地这一专题的边坡及其它各类工程地质问题的研究成果。