一体化姿态传感器支持下多波束测深系统偏差处理

根据一体化姿态传感器的特点和多波束水深点计算的实际需要,重点讨论了多波束探头安装偏差的处理,提出了把综合偏差输入姿态传感器,利用其偏差校准处理功能,实现多波束探头坐标系的横摇、纵摇和航向的直接输出,简化数据处理提高作业效率的设想;给出了姿态传感器安装偏差与多波束探头安装偏差进行合并获得综合偏差的方法。     

Numerical investigation of the uplift performance of prestressed fiber-reinforced polymer floating piles

Finite element analyses of prestressed fiber-reinforced polymer floating piles subjected to uplift force have been conducted in this paper. First, parameters of the modified BPE model (bond–slip model at the fiber-reinforced polymer–concrete interface) were calibrated using existing pullout testing data on fiber-reinforced polymer rebars embedded in concrete. Nonlinear spring elements were used in numerical modeling to characterize the bond–slip behavior at the fiber-reinforced polymer–concrete interface. A parametric study was performed to assess the influence of rebar diameter, fiber-reinforced polymer material, embedment length, and concrete strength on the mobilized bond stress. Upon the successful modeling of the pullout performance of fiber-reinforced polymer rebars in concrete, numerical models were developed to investigate the dependence of the uplift performance of floating piles on the prestress level, uplift force, fiber-reinforced polymer type, and compressive strength of concrete.     

海岸波浪多次破碎波能耗散模型

在坡度很缓(接近或小于1∶100)的海岸,波浪在向海岸传播的过程中,可能经历多次破碎,而在两次波浪破碎之间将伴随着波浪恢复(波浪恢复到不破碎状态)。在现有海岸波高计算模型中,波浪破碎是通过波能耗散来模拟的,但所采用的波能耗散模型都不能自动考虑波浪出现多次破碎的过程,特别精确模拟这一过程中出现的波浪恢复。本文提出了解决这一问题的新的波能耗散模型,模型的建立是通过在Dally模型中重新建立稳定波能、饱和波高水深比和波能耗散系数,并引入了波浪恢复的判断条件实现的。该模型的波能耗散在波浪恢复区的值很小故能描述波浪恢复区的波浪运动。与实验结果的对比表明,新模型可以适合缓坡情况波浪多次破碎的波高模拟,而且对不同坡度的平坡和沙坝海岸(1∶100～1∶10)的破碎波模拟都可以给出与实验结果符合的结果,并且可以自动识别多次波浪破碎的存在和波浪恢复的发生。     

利用GPS拖体在万山区域测量平均海面技术研究

Wanshan area has been chosen to be the specified field to calibrate and validate(Cal/Val) the HY-2 altimeter and its follow-on satellites. In March 2018, an experiment has been conducted to determine the sea surface height(SSH) under the HY-2 A ground track(Pass No. 203). A GPS towing-body(GPS-TB) was designed to measure the SSH covering an area of about 6 km×28 km wide centered on the HY-2 A altimeter satellite ground track. Three GPS reference stations, one tide gauge and a GPS buoy were placed in the research area, in order to process and resolve the kinematic solution and check the precision of the GPS-TB respectively. All the GPS data were calculated by the GAMIT/GLOBK software and TRACK module. The sea surface was determined by the GPS-TB solution and the tide gauge placed on Zhiwan Island. Then the sea surface of this area was interpolated by Arc GIS10.2 with ordinary Kriging method. The results showed that the precision of the GPS-TB is about 1.10 cm compared with the tide gauge placed nearby, which has an equivalent precision with the GPS buoy. The interpolated sea surface has a bias of –1.5–4.0 cm with standard deviation of 0.2–2.4 cm compared with the checking line. The gradient of the measured sea surface is about 1.62 cm/km along the HY-2 orbit which shows a good agreement compared with the CLS11 mean sea surface(MSS). In the Cal/Val of satellites, the sea surface between the tide gauge/GPS buoy and the footprint of altimeter can be improved by this work.     

Determination of trace and rare-earth elements in Chinese soil and clay reference materials by ICP-MS

Inductively coupled plasma mass spectrometry(ICP-MS) has become a powerful tool for providing reliable analytical results in many laboratories around the word. In this study, the mixture of HF and HNO3 acids in high-temperature and high-pressure closed-vessel digestion technique were used to decompose some Chinese reference materials, and thirty seven elements were determined by ICP-MS. Most of the results for Chinese soil reference materials were found to be in reasonable agreement with the reference values, except Cs, Ta, Li, Ge, Zn, Nd, Tb and Ta whose values need to be revised. Their precisions were typically lower than 5% RSD. However, the Precisions of Chinese clay reference materials, especially for GBW03102 and GBW03102a, were significantly different with reference values, probably reflecting the existence of a coarser-grained fraction(70 μm) in samples, and the formation of fluorides in Al-rich samples during sample decomposition by using the mixture of HF and HNO3 acids. Moreover, thirty-seven trace elements covering the mass range from Li to U in four Chinese clay reference materials were firstly provided with good precision and accuracy in this study.     

黄海沉积物标准物质研制

报道了中国黄海海洋标准物质的研制过程,其中包括样品的采集、制备,均匀性检验、稳定性考察以及定值分析方法,并对数据进行了数理统计,给出了标准物质的定值数据。最后确定标准值45个,参考值8个,信息值11个,共计测定元素64个。     

瓦斯煤层裸露面蠕变失稳的时间预测研究

通过对煤体蠕变特性的分析,提出采用五元粘弹塑流变模型能很好地描述煤体的蠕变特征。在考虑煤层瓦斯的作用下,得到了含瓦斯的煤蠕变状态方程。由于揭开的煤层裸露面由原来的三向受力变为二向受力,在合适的条件下煤体会产生蠕变。而煤体在双向受压时,裸露面方向的应变为拉应变,当裸露面方向的煤体的拉应变大于煤体破坏时的拉应变时,煤体将产生蠕变失稳。从而可以预测煤体蠕变失稳的时间。研究成果可以解释揭煤工程岩体失稳。