Dextral‐Slip Thrust Faulting and Seismic Events of the Ms 8.0 Wenchuan Earthquake,Longmenshan Mountains,Eastern Margin of the Tibetan Plateau

Abstract: Dextral-slip thrust movement of the Songpan-Garzê terrain over the Sichuan block caused the Ms 8.0 Wenchuan earthquake of May 12, 2008 and offset the Central Longmenshan Fault (CLF) along a distance of ~250 km. Displacement along the CLF changes from Yingxiu to Qingchuan. The total oblique slip of up to 7.6 m in Yingxiu near the epicenter of the earthquake, decreases northeastward to 5.3 m, 6.6 m, 4.4 m, 2.5 m and 1.1 m in Hongkou, Beichuan, Pingtong, Nanba and Qingchuan, respectively. This offset apparently occurred during a sequence of four reported seismic events, EQ1–EQ4, which were identified by seismic inversion of the source mechanism. These events occurred in rapid succession as the fault break propagated northeastward during the earthquake. Variations in the plunge of slickensides along the CLF appear to match these events. The Mw 7.5 EQ1 event occurred during the first 0–10 s along the Yingxiu-Hongkou section of the CLF and is characterized by 1.7 m vertical slip and vertical slickensides. The Mw 8.0 EQ2 event, which occurred during the next 10–42 s along the Yingxiu-Yanziyan section of the CLF, is marked by major dextral-slip with minor thrust and slickensides plunging 25°–35° southwestward. The Mw 7.5 EQ3 event occurred during the following 42–60 s and resulted in dextral-slip and slickensides plunging 10° southwestward in Beichuan and plunging 73° southwestward in Hongkou. The Mw 7.7 EQ4 event, which occurred during the final 60–95 s along the Beichuan-Qingchuan section of the CLF, is characterized by nearly equal values of dextral and vertical slips with slickensides plunging 45°–50° southwestward. These seismic events match and evidently controlled the concentrations of landslide dams caused by the Wenchuan earthquake in Longmenshan Mountains.     

隐伏构造蚀变岩型钼矿区勘探线布设方法及矿体圈定中有关问题的讨论

建议隐伏矿矿区采用行、排剖面网法布置勘探线和钻孔,利于多方位编制研究性勘探线剖面图,研究和确定深部矿体产状。对隐伏构造蚀变岩型、石英脉—蚀变岩型钼矿333类型资源/储量的圈定与外推分七种情况作了叙述,对米.百分值工程矿体的圈定和外推分五种情况作了叙述。低品位矿应圈定矿体与估算资源/储量。     

断层滑动速率,地震重复时间和平均应力降

本文综述了国内外大地震复发间隔研究的现状，系统整理了中国大陆活断层滑运速率，已发现的古地震遗迹及古地震复发间隔，结果表明，在滑动速率较在的活断层发现的古地震复发间隔较短，Ｋａｎａｍｏｒｉ和Ａｌｌｅ（１９８５）研究了具有大范围重复时间（２０年到几千年）的板内大地震的震源参数，发现复发间隔较长的大地震具有较高的平均应力降，我们在实验室内研究了应变速率不同时固体围压三轴压缩下完整花岗岩破裂后的粘滑现象。     

九寨沟Ms7.0地震的同震形变场误差研究及断层滑动分布反演

北京时间2017年8月8日四川省九寨沟发生Ms7.0级地震。为了提高断层滑动分布反演的可靠性,本文利用升降轨InSAR数据联合反演断层滑动分布,再根据模拟形变值二次反演,对比反演结果来探讨升降轨形变场误差和确定断层滑动分布的结果。结果表明,九寨沟升轨同震形变场的质量较好,降轨形变场受余震、震后粘弹性松弛效应影响明显,利用模拟形变值二次反演确定的断层滑动分布可靠性更高。     

脐带缆螺旋滑移分析及力学性能研究

针对脐带缆内部螺旋层,应用Darboux标架建立螺旋结构空间坐标系,推导弯曲载荷下螺旋结构的局部变形和滑移。考虑螺旋构件间的接触和摩擦作用,建立螺旋结构的受力平衡偏微分方程,并研究螺旋角和摩擦系数对螺旋结构滑移的影响。基于同层螺旋结构本构关系相同假设,将所有螺旋结构力学性能线性叠加,拟合脐带缆整体弯曲刚度。运用建立的理论解析方法,对某双层铠装脐带缆的力学性能进行研究,并与数值模拟结果进行对比验证。对比结果表明,理论解析得到的螺旋滑移结果与数值模拟结果一致,理论解析得到的脐带缆弯曲刚度与数值模拟结果在全滑动阶段比较接近。     

A MERLIN survey of 4.7-GHz excited OH masers in star-forming regions

Phase-referenced observations of 13 star-forming regions in the  ²Π_1/2, J = 1/2  transition of rotationally excited OH at 4765 MHz have been carried out using MERLIN. Two of the regions were also observed at 4750 MHz and one at 4660 MHz. There were 10 maser detections at 4765 MHz and three non-detections. There were no detections at 4750 and 4660 MHz. The 4765-MHz masers have brightness temperatures of  ∼10⁷ K  at MERLIN resolution (∼50 mas). Several cases of 4765-MHz masers overlapping in position and velocity with 1720- and 1665-MHz masers are reported. There are also isolated 4765-MHz masers with peak flux densities ≥30 times that of any ground-state counterpart. Most of the 4.7-GHz maser spots are unresolved at 50-mas angular resolution, but in four of the nearest sources the maser spots are resolved, indicating a characteristic size for 4765-MHz maser regions of ∼100 au. In W3(OH) we discovered that 20 per cent of the 4765-MHz emission comes from a narrow low-brightness filament that stretches north–south for ∼1.0 arcec (∼2200 au) between two previously known 4765-MHz maser spots. The filament appears in projection against the H  ii region and has a brightness temperature of  ∼4 × 10⁵ K  . There are matching absorption features in mainline transitions of highly excited OH. The filament may trace a shock front in a rotating disc.     

青藏高原东缘活动构造

青藏高原东缘由岷山断块和龙门山构造带构成。以活动构造地貌学为主线,在解析该地区主干断裂晚第四纪以来活动的地质地貌表现的基础上,对一批断裂运动学和史前强震活动的定量数据进行分析研究,结果表明:在岷山断块中,虎牙断裂的平均左旋滑动速率为1.4 mm/a,垂直滑动速率为0.3 mm/a。岷江断裂的平均垂直滑动速率介于0.37 mm/a~0.53 mm/a之间,左旋位错量与垂直位错量大致相当;在龙门山构造带中,茂汶-汶川断裂、北川-映秀断裂和彭县-灌县断裂的平均垂直滑动速率均在1 mm/a左右,且几条主干断裂的右旋位错量与垂直位错量相当。结合震源机制解结果和GPS测量资料,建立晚新生代以来青藏高原东缘向南东方向逸出的构造变形模式。     

Numerical investigation of the uplift performance of prestressed fiber-reinforced polymer floating piles

Finite element analyses of prestressed fiber-reinforced polymer floating piles subjected to uplift force have been conducted in this paper. First, parameters of the modified BPE model (bond–slip model at the fiber-reinforced polymer–concrete interface) were calibrated using existing pullout testing data on fiber-reinforced polymer rebars embedded in concrete. Nonlinear spring elements were used in numerical modeling to characterize the bond–slip behavior at the fiber-reinforced polymer–concrete interface. A parametric study was performed to assess the influence of rebar diameter, fiber-reinforced polymer material, embedment length, and concrete strength on the mobilized bond stress. Upon the successful modeling of the pullout performance of fiber-reinforced polymer rebars in concrete, numerical models were developed to investigate the dependence of the uplift performance of floating piles on the prestress level, uplift force, fiber-reinforced polymer type, and compressive strength of concrete.