松江河电厂小山水电站导流洞出口边坡稳定性分析

小山水电站导流洞出口边坡其地质结构为下部中侏罗世安山岩（αＪ２），其上覆盖了第三纪末第四纪初的玄武岩（βＮ～Ｑ），两者间为不整合接触，不整合面夹有０．１～０．６ｍ厚的粘土状及碎石粘土状夹层，产状倾向河床，倾角±２５°。在上覆玄武岩层中见有高倾角的宽张裂隙带，与不整合面一起构成松动岩体，不整合面为底滑面。通过边界条件的分析和稳定计算，松动岩体的抗滑系数Ｋ＝３．１０２，边坡是稳定的。在施工过程中采取了相应的安全保护措施，导流洞出口提前２８ｍ进洞，节约挖方量６００００ｍ３，提前了工期。经三年多的施工到运行，边坡无异常变化，表明该项优化设计是可行的。     

不同含水率下滑坡滑带土动力特性试验研究

甘肃舟曲泄流坡滑坡地处活跃断层破裂带内,断层活动控制着该滑坡的发育和运动。为了研究该滑坡滑带土的动力特性,采用重塑滑带土样,在固结不排水条件下,利用分级循环加载法开展动三轴试验,重点探讨含水率的变化对滑带土动力特性的影响规律。试验结果表明:含水率一定时,泄流坡滑坡滑带土的动弹性模量随动应变的增大呈指数形式减小;动应变一定时,动弹性模量随含水率的增大而不断减小,且衰减速率随含水率的增大而增大;含水率并不影响动弹性模量-动应变关系曲线的形态,不同含水率下该关系曲线可以进行归一化。滑带土阻尼比随含水率的增大而增大,阻尼比-动应变关系曲线也具有归一化特征。不同含水率下泄流坡滑带土动应力-应变本构关系可以用双曲线模型进行描述。     

露天矿边坡实用型专家系统PESOPS V1.0的设计与应用

结合边坡工程和岩质边坡普遍存在的问题，建造了一个露天矿边坡实用型专家系统ＰＥＳＯＰＳ Ｖ１．０。介绍了滑坡预报子系统的原理和方法，通过应用实例表明该子系统适用性强，预报可靠、使用方便。     

微凸体对抛光岩石表面静摩擦系数影响试验研究

对典型岩石摩擦滑动试验装置进行了改进,以8种硅酸盐岩作为研究对象,在低正应力条件下对岩石摩擦滑动过程中的静摩擦系数进行了试验研究。对滑动表面形貌进行了表征,从统计学角度分析了粗糙度对静摩擦系数的影响,并基于滑动表面微凸体（凹凸体、微观粗糙度）对这一影响作进一步分析。研究表明：滑动面为抛光面时,千枚岩、石英岩、岩屑砂岩和石英砂岩的静摩擦系数为0.38～0.47,砾岩、含砾粗粒石英砂岩、中粒岩屑砂岩和中粒石英砂岩的静摩擦系数为0.83～1.07;在粗糙度中,轮廓最大谷深Rm和轮廓最大峰高Rp两个参数导致摩擦滑动中产生不同静摩擦系数,且随着这两个参数的增加,静摩擦系数呈指数规律增加;千枚岩、石英岩、岩屑砂岩和石英砂岩滑动表面的微凸体数量较少,砾岩、含砾粗粒石英砂岩、中粒岩屑砂岩和中粒石英砂岩滑动表面的微凸体数量较多,随着微凸体数量的增加岩石摩擦滑动过程中的静摩擦系数增加。     

Effects of turbulence on the transport of individual particles as bedload in a gravel‐bed river

This study investigates the association between mean and turbulent flow variables and the movement of individual particles in a gravel‐bed river. The experimental design implemented in the Eaton‐North River (Québec, Canada) is based on the simultaneous observations at a high temporal resolution of both particle movements as bedload using an underwater video camera and of the streamwise and vertical flow velocity components using a vertical array of three electromagnetic current meters (ECMs). The frequency and distance of displacement of particles larger than 20 mm that were sliding or rolling on the bed were measured from a 10 minutes long film. Mean and turbulent flow properties obtained for periods without sediment transport are compared to those when particles were sliding and rolling. When particles are sliding, weak differences are present for the mean streamwise velocity and normal vertical stresses. Instantaneous Reynolds shear stresses are significantly lower for sliding events which was not expected but could be explained by the important dominance of Quadrant 3 events (inward interactions). When particles are rolling, only the vertical normal stresses show a weak difference from those observed in the absence of transport but they tend to occur when Quadrant 2 (ejections) dominate the flow field. For both sliding and rolling particles, vertical and/or streamwise fluid accelerations show high magnitude values when compared to periods without transport. For sliding particles, streamwise acceleration is mostly negative and combines most of the time with a positive vertical acceleration. For rolling particles, streamwise and vertical acceleration are predominantly of opposite sign. These results suggest that fluid acceleration or deceleration in the streamwise and vertical directions is affecting the pressure field around particles. In this study, fluid acceleration seems to play a more important role than Reynolds shear stress or normal stresses for bedload movements. Copyright © 2010 John Wiley & Sons, Ltd.     

Sliding mode fuzzy control: Theory and verification on a benchmark structure

A sliding mode fuzzy control (SMFC) algorithm is presented for vibration reduction of large structures. The rule base of the fuzzy inference engine is constructed based on the sliding mode control, which is one of the non‐linear control algorithms. In general, fuzziness of the controller makes the control system robust against the uncertainties in the system parameters and the input excitation, and the non‐linearity of the control rule makes the controller more effective than linear controllers. For verification of the present algorithm, a numerical study is carried out on the benchmark problem initiated by the ASCE Committee on Structural Control. To achieve a high level of realism, various aspects are considered such as actuator–structure interaction, sensor noise, actuator time delay, precision of the A/D and D/A converters, magnitude of control force, and order of control model. Performance of the SMFC is examined in comparison with those of other control algorithms such as H_{mixed 2/∞}, optimal polynomial control, neural networks control, and SMC, which were reported by other researchers. The results indicate that the present SMFC is efficient and attractive, since the vibration responses of the structure can be reduced very effectively and the design procedure is simple and convenient. Copyright © 2000 John Wiley & Sons, Ltd.     

框架预应力锚杆边坡支护结构的稳定性分析方法及其 应用

以边坡极限平衡理论及框架预应力锚杆边坡支护结构的圆弧滑动破坏模式为基础,在考虑框架、锚杆对土体边坡稳定性影响的情况下,基于圆弧滑动条分法的思想利用积分法建立了内部稳定性安全系数计算模型和最危险滑移面搜索模型。确定滑移面圆心坐标为几何控制参数,推导了安全系数计算模型中各变量与滑移面圆心坐标之间的函数关系式,从而获得了滑移面几何控制参数与内部稳定性安全系数之间的函数关系。利用网格法对框架预应力锚杆支护结构最危险滑移面的圆心坐标进行动态搜索和求解。最后采用Matlab语言编制了框架预应力锚杆边坡支护结构的稳定性分析程序,并结合工程实例进行了验算,讨论了此种方法的适用条件,结果表明该方法简明适用,较传统的经验分析方法更加合理。     

Dynamic analysis of sliding structures with unsynchronized support motions

The dynamic analysis of sliding structures is complicated due to the presence of friction. Synchronization of the kinematics of all the isolation bearings is often granted to simplify the task. This, however, may lead to inaccurate prediction of the structural responses under certain circumstances. Stepped structures or continuous bridges with seismic isolation are notable examples where unsynchronized bearing motions are expected. In this paper, a logically simple and numerically efficient procedure is proposed to solve the dynamic problem of sliding systems with unsynchronized support motions. The motion equations for the sliding and non‐sliding modes of the isolated structure are unified into a single equation that is represented as a difference equation in a discrete‐time state‐space form and the base shear forces between the sliding interfaces can be determined through simple matrix algebraic analysis. The responses of the sliding structure can be obtained recursively from the discrete‐time version of the motion equation with constant integration time step even during the transitions between the non‐sliding and sliding phases. Therefore, both accuracy and efficiency in the dynamic analysis of the highly non‐linear system can be enhanced to a large extent. Rigorous assessment of seismic structures with unsynchronized support motions has been carried out for both a stepped structure and a continuous bridge. Effectiveness of friction pendulum bearings for earthquake protection of such structures has been verified. Moreover, evident unsynchronized sliding motions of the friction bearings have been observed, confirming the necessity to deal with each of the bearings independently in the analytical model. Copyright © 2000 John Wiley & Sons, Ltd.     

Bidirectional shaking table tests of a low-cost friction sliding system with flat-inclined surfaces

A novel low-cost friction sliding system for bidirectional excitation is developed to improve the seismic performance of reinforced concrete (RC) bridge piers. The sliding system is a spherical prototype developed by combining a central flat surface with an inclined spherical segment, characterized by stable oscillation and a large reduction in response accelerations on the flat surface. The inclined part provides a restoring force that limits the residual displacements of the system. Conventional steel and concrete are employed to construct a flat-inclined spherical surface atop an RC pier. The seismic forces are dissipated through the frictions generated during the sliding movements; hence, the seismic resilience of bridges can be ensured with a low-cost design solution. The proposed system is fabricated utilizing a mold created by a three-dimensional printer, which facilitates the use of conventional concrete to construct spherical shapes. The concrete surface is lubricated with a resin material to prevent abrasion from multiple input ground motions. To demonstrate the effectiveness of the system, bidirectional shaking table tests are conducted in the longitudinal and transverse directions of a scaled bridge model. The effect of the inclination angle and the flat surface size is investigated. The results demonstrate a large decrease in response acceleration when the system exhibits circular sliding displacement. Furthermore, the inclination angle that generates the smallest residual displacement is identified experimentally.     

岩质边坡平面滑动的模糊可靠度分析

综合考虑了边坡平边滑动的随机性和模糊性。根据工程实际确定结构功能函数的概率密度函数及表征边坡稳定性的隶属函数,提出了边坡失稳的模糊概率和边坡稳定性模糊可靠度的计算方法,并计算了模糊可靠度的置信区间,具有一定的实际意义。