Prediction of ground displacements and velocities from groundwater level changes at the Vallcebre landslide (Eastern Pyrenees, Spain)

In active landslides, the prediction of acceleration of movement is a crucial issue for the design and performance of warning systems. The landslide of Vallcebre in the Eastern Pyreenes, Spain, has been monitored since 1996 and data on rainfall, groundwater levels and ground displacements are measured on a regular basis. Displacements observed in borehole wire extensometers have shown an immediate response of the landslide to rainfall episodes. This rapid response is likely due to the presence of preferential drainage ways. The occurrence of nearly constant rates of displacement in coincidence with steady groundwater levels suggests the presence of viscous forces developed during the movement. An attempt to predict both landslide displacements and velocities was performed at Vallcebre by solving the momentum equation in which a viscous term (Bingham and power law) was added. Results show that, using similar rheological parameters for the entire landslide, computed displacements reproduce quite accurately the displacements observed at three selected wire extensometers. These results indicate that prediction of displacements from groundwater level changes is feasible.     

Modeling the 2D behavior of dry‐stone retaining walls by a fully discrete element method

The dry‐stone retaining walls (DSRW) have been tipped as a promising solution for sustainable development. However, before recently, their behavior is relatively obscure. In this study, discrete element method (DEM) approach was applied to simulate the plane strain failure of these walls. A commercial DEM package (PFC2D™) was used throughout this study. The authors used a fully discrete approach; thus, both the wall and the backfill were modeled as discrete elements. The methodology for obtaining the micromechanical parameters was discussed in detail; this includes the three mechanical sub‐systems of DSRWs: wall, backfill and interface. The models were loaded progressively until failure, and then the results were compared with the full‐scale experimental results where the walls were loaded, respectively, with hydrostatic load and backfill. Despite its complexity and its intensive calculation time, DEM model can then be used to validate a more simplified approach. Copyright © 2015 John Wiley & Sons, Ltd.     

面向WebGL的矢量数据三维绘制技术

矢量数据的叠加显示能够提高三维虚拟地球的表达效果与分析能力。受限于GPU的计算精度,在三维虚拟地球中矢量数据绘制普遍存在抖动现象和深度冲突现象。对基于WebGL的矢量数据三维绘制中计算精度问题进行了分析,提出了使用CPU RTC技术和GPU RTE技术提高顶点变换的精度,使用多视锥渲染算法和深度平面技术解决深度缓存精度问题。实验证明,这几种技术和算法可以有效缓解抖动现象和深度冲突现象导致的视觉干扰,改善了各种尺度和范围的矢量数据在三维地形上的叠加显示效果。     

受控定向钻进技术在福建马坑矿区的应用

重点介绍了福建马坑矿区ZK8321分支孔受控定向钻进技术。施工中运用了国内先进的螺杆钻造斜技术及光纤陀螺测量定向技术,避开上部复杂孔段（松散破碎层、溶洞地层、采空区等）及对勘探工作的影响,达到了施工目的;总结了施工技术难点与措施,分析了施工技术效果,积累了宝贵的施工经验。     

Is Ziarat a Potential Site for Conventional or Unconventional Energy Resources?

A structural interpretation of the Ziarat block in the Balochistan region (a part of the Suleiman Fold and Thrust Belt) has been carried out using seismic and seismological data. Seismic data consists of nine 2.5D pre‐stack migrated seismic lines, whereas the seismological data covers the Fault Plane Solution and source parameters. Structural interpretation describes two broad fault sets of fore and back thrusts in the study area that have resulted in the development of pop‐up structures, accountable for the structural traps and seismicity pattern in terms of seismic hazard. Seismic interpretation includes time and depth contour maps of the Dungan Formation and Ranikot group, while seismological interpretation includes Fault Plane Solution, that is correlated with a geological and structural map of the area for the interpretation of the nature of the subsurface faults. Principal stresses are also estimated for the Ranikot group and Dungan Formation. In order to calculate anisotropic elastic properties, the parameters of the rock strength of the formations are first determined from seismic data, along with the dominant stresses (vertical, minimum horizontal, and maximum horizontal). The differential ratio of the maximum and minimum horizontal stresses is obtained to indicate optimal zones for hydraulic fracturing, and to assess the potential for geothermal energy reservoir prospect generation. The stress maps indicate high values towards the deeper part of the horizon, and low towards the shallower part, attributed to the lithological and structural variation in the area. Outcomes of structural interpretation indicate a good correlation of structure and tectonics from both seismological and seismic methods.     

西秦岭大店沟金矿成矿流体演化及矿床成因

大店沟金矿是西秦岭成矿带近年来新发现的中型金矿床,金矿体赋存在下古生界丹凤群木其滩组绢云绿泥石英片岩中,叠加在北东东向脆韧性剪切带中的脆性构造为成矿结构面。在总结控矿地质特征的基础上,通过开展系统的流体包裹体、稳定同位素地球化学研究及成矿流体演化、矿床成因探讨,认为成矿期共分半自形黄铁矿、它形粒状黄铁矿、石英多金属硫化物和碳酸盐-黄铁矿4个成矿阶段,其中它形黄铁矿阶段和石英多金属硫化物阶段为最主要成矿阶段。流体包裹体类型以水溶液包裹体、CO₂三相包裹体和纯CO₂包裹体为主,成矿温度集中在120~256 ℃之间,成矿流体盐度为4.03%~15.27%。H-O同位素研究显示成矿热液主要为变质水混合大气降水,S同位素组成特征表明成矿物质来自深源;流体不混溶和沸腾作用是金沉淀的主要机制,矿床成因类型为造山型金矿。通过成矿结构面舒缓波状特征规律总结,判断成矿流体沿成矿结构面自南西深部向北东浅部运移、沉淀,形成分段富集矿化。     

硬土软岩滑坡近水平滑移的离心机模型试验研究

中国西北地区存在大量的新近纪硬土软岩滑坡灾害,为研究该类滑坡的变形特征,开展两组离心机模型试验模拟滑带劣化引起滑坡变形破坏的全过程,获取模型坡体土压及位移的实时变化曲线。研究表明,当软弱带强度降低时,硬土软岩滑坡的上部滑体呈块体状滑动,在快速运动滑动过程中,滑体呈现块状平移,不会彻底解体、液化;硬土软岩滑坡中前部出现水平应力集中,导致下伏滑带塑性流动变形,诱发其中前部上覆滑体的水平运动,并向滑坡后缘扩展,最终形成多级水平滑动。     

金沙江下虎跳滑石板滑坡破坏机理及稳定性分析

1996年10月28日发生在金沙江下虎跳峡口的滑石板滑坡,因堵塞金沙江、摧毁公路而引起高度重视。野外调查发现,滑石板滑坡是典型结构面控制的顺层基岩滑坡,层面和两组近于垂直层面的节理将边坡厚层灰岩切割成不同规模的菱形块体,长期的风化作用、重力、降雨、人工开挖公路等因素作用下,这些菱形块体从顺层稳定状态演化为稳定性较差的悬挂体,受河谷边坡斜向割切影响,表现为梯级叠次悬挂,最外边的悬挂体稳定性最差,最容易发生快速滑动。因此,该滑坡每次发生破坏滑动的体积不会很大,但是具有多次重复发生的特点,值得高度注意。     

营口-潍坊断裂带新生代运动学特征

营口-潍坊断裂带在新生代时期对渤海湾盆地东部构造、沉积及油气成藏规律等方面具有重要影响和控制作用.依据大量实际地震资料,从剖面上识别出了花状构造、丝带效应、反转构造等营口-潍坊断裂带新生代时期走滑活动的标志,在平面上识别出了4种组合构造样式,在此基础上,应用拉分盆地走滑量计算的理论模型,对营口-潍坊断裂带新生代时期的走滑位移量进行了初步估算,认为营口-潍坊断裂带在新生代时期具右旋走滑活动特征,其主要走滑活动表现为3期,分别为始新世早期、渐新世早-中期和上新世晚期-第四纪,新生代累计右旋走滑位移量约为10～20 km.