青海西部祁漫塔格成矿带找矿新进展及其意义

青海省祁漫塔格成矿带位于东昆仑造山带北西段,带内以往开展了以铁为主的找矿工作,发现一批矽卡岩型中型矿床。近年来带内找矿取得了重大突破:①发现一种新类型矿床——"虎头崖"式层控型大型多金属矿床;②低缓磁异常区多金属和铁矿找矿效果显著,发现四角羊-牛苦头大型多金属矿床,野马泉矿区多金属矿规模达到中型,尕林格矿区发现深部厚大的铁矿体。在系统地综合总结这些成果的基础上,探讨了找矿新进展的意义,划分了3处成矿远景区,并初步讨论了各成矿远景区内进一步找矿的方向。     

基于数字图像处理技术的冰川堆积物粒度分析——以川西贡嘎山冰川堆积物为例

冰川堆积物的粒度组成在很大程度上控制了其物理力学性质,但常规试验无法得到连续的冰川堆积物的粒度组成数据.应用数字图像处理技术和室内试验相结合的分析方法,首先借助图像处理技术,对冰川堆积物剖面的砾石形态进行分析.获取粗粒部分(>2cm)的粒度组成,然后采用室内颗分试验获得细粒(<2cm)部分的粒度组成,将2类粒度数据进行叠合即可获取连续的冰川堆积物的粒度组成.结果表明:研究区冰ill堆积物的粒度组成极不均匀且颗粒分析曲线呈现多峰性,具有良好的级配和工程性质;冰川堆积物的粒度组成、砾石形态和排列特征都有很好的分形特征.     

基于立方体模型的三维矿体模拟与资源评估

在成矿预测理论的指导下,利用已有的商业三维地质建模软件,建立了研究区地质、构造、钻孔、矿体的空间三维模型。在此基础上进行矿体品位估算与插值,建立了研究区立方体预测模型。从三维的角度分析矿体分布的不均匀性,以立方体预测模型为基础,应用三维矿体轮廓提取和品位描述算法,对矿体三维外部形态和内部品位的分布特征进行了详细分析,为今后矿区找矿指出了新方向。     

"五层楼+地下室"找矿模型的适用性及其对深部找矿的意义

在我国地质工作者通过长期实践总结出来的"五层楼"找矿模式的基础上,根据近年来深部找矿的新进展,重点探讨了"五层楼+地下室"找矿模型的适用性."五层楼+地下室"作为找矿模型不但适合于赣南-粤北地区,也适用于赣中的徐山矿区,在南岭外围的其他矿区如广西的大明山地区和云南的老君山地区也有适用性;除了石英脉型钨矿之外,"五层楼+地下室"模型也适用于钨矿之外的其他矿种,如广西大厂的锡多金属矿区;对于其他类型的矿种和矿床类型,如火山岩型块状硫化物矿床,在某种程度上也不妨理解为倒转的"五层楼+地下室".当然,"五层楼+地下室"找矿模型的运用也是有条件的,需要结合具体矿区的具体成矿地质条件来综合把握,灵活运用.     

辽宁丹东四道沟金矿床流体包裹体特征及矿床成因

四道沟金矿床为辽东南地区重要的蚀变岩型矿床,其空间产出受断裂构造、盖县组变质地层及区内岩浆活动的联合制约.流体包裹体研究表明:成矿早期流体为中温、低盐度且富含CO2及CH4等挥发分的热液;主成矿阶段成矿流体为中温、高盐度的热液体系;矿区晚期阶段矿化流体具有较低的温度及盐度特征.综合分析认为:四道沟金矿床早期成矿流体与区内燕山晚期三股流花岗闪长岩体活动有关;主成矿阶段流体可能来自其后的花岗斑岩等类脉岩活动;成矿晚期阶段流体则主要来自大气降水.四道沟金矿床是燕山晚期不同来源及性质的热液先后叠加成矿作用的产物.     

内蒙古赤峰市鸭鸡山钼铜矿成矿流体特征及矿床成因

鸭鸡山钼铜矿床所处大地构造位置为蒙古—鄂霍次克造山带的温都尔庙—翁牛特旗褶皱带,该带是我国重要的有色金属成矿带之一。鸭鸡山钼铜矿床分布受控于区域EW向深断裂,矿体产于EW向主断裂F1上盘的二长花岗岩体中,严格受东西向F1断裂和北东向断裂控制。该矿床矿石自然类型为石英脉型和蚀变岩型,矿石中硫化物主要有黄铁矿、辉钼矿和黄铜矿。石英流体包裹体有气液两相、含子矿物三相和纯气相3种类型。流体盐度(w(NaCl))为2.06%～44.00%,集中在40%～44%和4%～8%;流体密度为0.85～1.25 g/cm3,集中在1.20～1.24 g/cm3和0.88～0.92 g/cm3;成矿温度为167～380℃,集中在320～360℃和200～220℃;流体盐度、密度、成矿温度在直方图上均表现为双峰特征。研究表明:成矿早阶段流体为高盐度、高密度和高温的岩浆流体,气相包裹体与含子晶三相包裹体共存,表明该阶段发生过强烈的沸腾或不混溶;成矿晚阶段为低盐度、低密度和中温的混合流体。通过等容线图解法估算成矿压力为274.7～368.5 MPa,用静岩压力梯度估算成矿深度为8.32～11.2 km。矿床成因类型为中成、中高温热液脉型...     

双频激电法在山区复杂条件下的应用——以福建垄源金多金属矿区为例

双频激电法可同时得到低频和高频电位差,由其计算视幅频率可抵消相同的影响因素,抑制干扰,增强异常幅值,提高观测精度。根据垄源金多金属矿区物性参数可确定受构造控制的硫化多金属矿（脉）体多以充填形式产出,具有低阻高极化反映,随着埋深的不同,视幅频率（Fs）有相应的变化,幅值一般为4%～11%,与背景视幅频率（Fs）2%～4%有明显差别。该区野外工作采用SQ-3C双频激电仪器,测网布设测线6条,其中线距100m、点距10m、、测线长度为400m。根据Fs、ρs曲线形态及Fs等值线图解释该矿区存在一条破碎带,破碎带北部呈现矿体异常特征,推断矿体（脉）走向为北西—南东向。依据该物探成果结合地质资料,布置钻探验证孔,其中8-1孔于156m见导水断裂破碎断层,8-2孔于31m见高品位金多金属矿（脉）体,验证物探解释与地质钻探吻合。     

Re-Os geochronology of Cu and W-Mo deposits in the Balkhash metallogenic belt,Kazakhstan and its geological significance

<正>The Central Asian metallogenic domain(CAMD) is a multi-core metallogenic system controlled by boundary strike-slip fault systems.The Balkhash metallogenic belt in Kazakhstan,in which occur many large and super-large porphyritic Cu—Mo deposits and some quartz vein- and greisen-type W—Mo deposits,is a well-known porphyritic Cu—Mo metallogenic belt in the CAMD.In this paper 11 molybdenite samples from the western segment of the Balkhash metallogenic belt are selected for Re—Os compositional analyses and Re—Os isotopic dating.Molybdenites from the Borly porphyry Cu deposit and the three quartz vein-greisen W—Mo deposits—East Kounrad.Akshatau and Zhanet—all have relatively high Re contents(2712—2772μg/g for Borly and 2.267—31.50μg/g for the other three W—Mo deposits),and lower common Os contents(0.670—2.696 ng/g for Borly and 0.0051—0.056 ng/g for the other three).The molybdenites from the Borly porphyry Cu—Mo deposit and the East Kounrad,Zhanet,and Akshatau quartz vein- and greisen-type W—Mo deposits give average model Re—Os ages of 315.9 Ma,298.0 Ma,295.0 Ma,and 289.3 Ma respectively.Meanwhile,molybdenites from the East Kounrad,Zhanet,and Akshatau W—Mo deposits give a Re—Os isochron age of 297.9 Ma,with an MSWD value of 0.97.Re-Os dating of the molybdenites indicates that Cu—W—Mo metallogenesis in the western Balkhash metallogenic belt occurred during Late Carboniferous to Early Permian(315.9—289.3 Ma),while the porphyry Cu—Mo deposits formed at—316 Ma,and the quartz vein-greisen W—Mo deposits formed at ~298 Ma.The Re—Os model and isochron ages thus suggest that Late Carboniferous porphyry granitoid and pegmatite magmatism took place during the late Hercynian movement.Compared to the Junggar-East Tianshan porphyry Cu metallogenic belt in northwestern China,the formation of the Cu—Mo metallogenesis in the Balkhash metallogenic belt occurred between that of the Tuwu-Yandong in East Tianshan and the Baogutu porphyry Cu deposits in West Junggar. Collectively,the large-scale Late Carboniferous porphyry Cu—Mo metallogenesis in the Central Asian metallogenic domain is related to Hercynian tectono-magmatic activities.     

胶东福山北部地区金及多金属成矿系列及找矿方向

胶东福山北部地区位于胶东栖(霞)-蓬(莱)-福(山)成矿带北段。该区粉子山群大面积出露,中生代岩浆活动强烈,褶皱断裂构造发育,形成一完整的热液成矿系统。对区内邢家山(钼钨)、王家庄(铜锌)、杜家崖(金)等典型矿床(式)研究发现,该区金属成矿作用与中生代燕山晚期斑岩体具有密切关系,由高温至低温成矿作用在空间上展布规律明显,共同构成了与中生代燕山晚期中酸性岩浆侵入作用有关的金及多金属成矿系列。从现有研究成果看,中低温热液脉型、斑岩-矽卡岩型以及浅成低温热液型金及多金属矿应作为该区找矿主攻方向。     

Shaking and splashing—A case study of far-field effects of the Mjølnir asteroid impact on depositional environments in the Barents Sea

The Mjølnir impact crater in the Norwegian Barents Sea features among the 20 largest impact craters listed in the Earth Impact Database. The impact is dated to 142 ± 2.6 Ma, corresponding closely to the Jurassic/Cretaceous boundary in the Boreal stratigraphy. Multidisciplinary studies carried out over the last three decades have suggested that the up to 40 km wide crater was created by a 1–3 km diameter impactor colliding with a shallow epicontinental sea, causing regional havoc and a regional ecological crisis that followed in its wake. Only minor evidence for the consequences of the impact for the surrounding depositional basins has been documented so far. This study describes a large submarine slump penetrated by hydrocarbon exploration well 7121/9-1, located in the southern Hammerfest Basin and approximately 350 km away from the impact site. The slump is dated by a black shale drape, which contains characteristic impact-related biotic assemblages and potential ejecta material. This precise dating enables us to associate the slump with large-scale fault movements and footwall collapse along the basin-bounding Troms-Finnmark Fault Complex, which we conclude were caused by shock waves from the Mjølnir impact and the passage of associated tsunami trains. The draping black shale is interpreted to represent significant reworking of material from the contemporary seabed by tsunamis and currents set up by the impact.