RTK在管线测绘中的应用及精度检验

概述了RTK技术在长距离引水管线测量中的应用,介绍了提高和保证测量精度的一些措施;根据对RTK实测精度的检验结果,证明RTK测量精度的稳定性和可靠性。     

铜镍矿床地球化学模式的应用——在贵州西部寻找隐伏铜镍矿床(含矿岩体)的探讨

根据已建立的铜镍矿床地球化学模式,通过对区域化探地球化学数据(Cu、N i、Co、Cr、Ag、B、Ba、As等元素)处理、分析、综合研究,认为在贵州威宁黑石镇—哲觉镇地区有可能找到隐伏铜镍矿床(含矿岩体)。     

海洋平台液压升降系统仿真研究

对平台液压升降模拟仿真系统研究的必要性进行分析,针对自升式平台作业工况和机理,提出总体设计方案,进行各部分的研究设计。在软件方面,建立虚拟仪器测试系统,该系统的建立实现了平台升降系统的仿真及液压阀件的测试。     

低屈服点钢研究进展与力学性能数据分析

为对低屈服点钢进行进一步的研究,同时促进其在工程中的应用,全面综述了国内外学者对低屈服点钢材料的研究成果,主要包括单调拉伸性能、循环加载性能以及低屈服点钢材料的应用。并将文献中的力学性能参数进行统计,采用K-S检验法对屈服强度与抗拉强度进行检验。结果表明:低屈服点钢具有良好的延性与滞回性能,力学性能参数基本满足规范要求;3种钢材的伸长率均随厚度增大而增大;低屈服点钢屈服强度符合正态分布,抗拉强度则不符合正态分布;实际工程中对低屈服点钢耗能构件的应用仍相对较少,还需进一步对其进行深入研究,以提高其应用比例。     

深海沉积物热流原位、快速探测技术

热流探测技术的应用对研究海洋地壳活动规律、防灾减灾与天然气水合物新能源探测具有重要意义.论文对海底热流原位探测技术作了全面的介绍,分析了温度梯度与热导率原位、快速测量的发展现状,指出了我国未来发展海底热流探测技术急待解决的问题.     

海底砂土中气体运移过程电阻率监测探针设计与实验

在浮力和动、静压力作用下,海底浅层气会在高渗透性土中发生垂直和水平方向的运移、聚集,诱发地层变形,甚至失稳破坏。为探索一种新型的气体运移过程原位监测技术,实现气致灾害实时监测预警,根据静电场测量原理,设计、制作了点状电极和环状电极两种形式电阻率探针。在分析了两种探针探测精度基础上,以砂土中气体扩散过程监测为例,利用其对3种速率气体运移过程进行连续监测实验。实验结果表明,两种探针电阻率测量误差均小于0.1%。点状电极探针测量灵敏度较高,可准确监测布设点含气量的变化、气体汇聚、消散过程及相应速率;环状电极探针测量灵敏度相对较低,但可监测气体在砂土中的时空运移过程。两种探针各有利弊,都可实现气体运移过程的有效监测。     

Spatio‐temporal heterogeneity in soil water stable isotopic composition and its ecohydrologic implications in semiarid ecosystems

Spatio‐temporal heterogeneity in soil water content is recognized as a common phenomenon, but heterogeneity in the hydrogen and oxygen isotope composition of soil water, which can reveal processes of water cycling within soils, has not been well studied. New advances are being driven by measurement approaches allowing sampling with high density in both space and time. Using in situ soil water vapour probe techniques, combined with conventional soil and plant water vacuum distillation extraction, we monitored the hydrogen and oxygen stable isotopic composition of soil and plant waters at paired sites dominated by grasses and Gambel's oak (Quercus gambelii) within a semiarid montane ecosystem over the course of a growing season. We found that sites spaced only 20 m apart had profoundly different soil water isotopic and volumetric conditions. We document patterns of depth‐ and time‐explicit variation in soil water isotopic conditions at these sites and consider mechanisms for the observed heterogeneity. We found that soil water content and isotopic variability were damped under Q. gambelii, perhaps due in part to hydraulic redistribution of deep soil water or groundwater by Q. gambelii in these soils relative to the grass‐dominated site. We also found some support for H isotope discrimination effects during water uptake by Q. gambelii. In this ecosystem, the soil water content was higher than that at the neighbouring Grass site, and thus, 25% more water was available for transpiration by Q. gambelii compared with the Grass site. This work highlights the role of plants in governing soil water variation and demonstrates that they can also strongly influence the isotope ratios of soil water. The resulting fine‐scale heterogeneity has implications for the use of isotope tracers to study soil hydrology and evaporation and transpiration fluxes to improve understanding of water cycling through the soil–plant–atmosphere continuum.     

Validation of a three‐dimensional constitutive model for nonlinear site response and soil‐structure interaction analyses using centrifuge test data

The capability of a bounding surface plasticity model with a vanishing elastic region to capture the multiaxial dynamic hysteretic responses of soil deposits under broadband (eg, earthquake) excitations is explored by using data from centrifuge tests. The said model was proposed by Borja and Amies in 1994 (J. Geotech. Eng., 120, 6, 1051‐1070), which is theoretically capable of representing nonlinear soil behavior in a multiaxial setting. This is an important capability that is required for exploring and quantifying site topography, soil stratigraphy, and kinematic effects in ground motion and soil‐structure interaction analyses. Results obtained herein indicate that the model can accurately predict key response data recorded during centrifuge tests on embedded specimens—including soil pressures and bending strains for structural walls, structures' racking displacements, and surface settlements—under both low‐ and high‐amplitude seismic input motions, which was achieved after performing only a basic material parameter calibration procedure. Comparisons are also made with results obtained using equivalent linear models and a well‐known pressure‐dependent multisurface plasticity model, which suggested that the present model is generally more accurate. The numerical convergence behavior of the model in nonlinear equilibrium iterations is also explored for a variety of numerical implementation and model parameter options. To facilitate broader use by researchers and practicing engineers alike, the model is implemented as a “user material” in ABAQUS Standard for implicit time stepping.     

微卫星标记在刺参(Apostichopus japonicus)人工繁育中亲本识别的应用

选取8个高多态性的微卫星位点, 对240只刺参(Apostichopus japonicus)幼体和14只疑似亲本进行了亲缘关系的鉴定。通过检测, 8个微卫星位点共得到53个等位基因, 平均等位基因数为6.63; 观察杂合度在0.730—0.902; 各位点的多态信息含量为0.696—0.836。通过亲缘关系分析软件CERVUS 3.0分析, 微卫星位点累积排除概率分别为0.9934、0.9997、0.99999。基于排除法个体基因型判定, 有37个子代有1个候选亲本, 194个子代有2个及以上候选亲本; 基于似然法判定, 置信度为80%时, 有198个子代个体找到最似亲本。综合排除法和似然法的亲权鉴定, 成功为229个子代个体找到它们的亲本, 鉴定成功率达95%以上。本研究结果可为刺参育种工作中亲本识别及家系分析提供技术支持和理论依据。