武汉地铁二号线一期工程岩土工程勘察特点分析

通过对武汉市轨道交通二号线一期工程沿线区域地质构造、工程地质和水文地质特点的分析,说明了在不同地貌单元和不同地质条件下针对地铁施工工法、进行岩土工程勘察的基本内容和方法,指出了地铁勘察在场地条件、勘察要求、试验内容等方面不同于一般的工业与民用建筑岩土工程勘察工作的特点,并据此合理安排勘察实施方案。     

Experience of Vibrocompaction in Calcareous Sand of UAE

The study is concerned with the influence of various factors on vibro compaction in calcareous soils, This include effect of carbonate content, and influence of pore water pressures in sand, settlements during vibrocompaction, vibroaccelerations during sand column installation compared to earthquake accelerations and finally the liquefaction design based on average CPT parameters. Previous experiences with calcareous sands and literature review confirm the necessity to apply a correlation factor for calcareous material to the raw cone penetration resistance CPT values obtained in the field. Because of the very fragile grains of the Dubai calcareous sands the penetration resistance will be influenced by crushing and grinding. To accommodate for effect of calcareous sands on measured CPT values, a best fit correlations formula called here “correlation factor” is developed. A parametric dynamic triaxial liquefaction testing programme has been executed on representative samples with loose and dense zones. Representative testing parameters for field conditions and earthquake design accelerations have been applied indicating that ground improvement is necessary. It was observed during the dynamic triaxial tests that the whole soil mass consisting of dense columns and looser zones in between behaves jointly, and therefore compaction control using an average-CPT approach is possible.     

Ore Genesis for Stratiform Ore Bodies of the Dongfengnanshan Copper Polymetallic Deposit in the Yanbian Area, NE China：Constraints from LA-ICP-MS in situ Trace Elements and Sulfide S–Pb Isotopes

The Dongfengnanshan Cu polymetallic deposit is one representative deposit of the Tianbaoshan ore district in the Yanbian area, northeast(NE) China. There occur two types of ore bodies in this deposit, the stratiform ore bodies and veintype ones, controlled by the Early Permian strata and the Late Hercynian diorite intrusion, respectively. Due to the ambiguous genetic type of the stratiform ore bodies, there has been controversy on the relationship between them and veintype ore bodies. To determine the genetic type of stratiform ore bodies, laser ablation inductively coupled plasma mass spectrometry(LA-ICP-MS) in situ trace elements and S–Pb isotope analysis have been carried on the sulfides in the stratiform ore bodies. Compared with that in skarn, Mississippi Valley-type(MVT), and epithermal deposits, sphalerite samples in the stratiform ore bodies of the Dongfengnanshan deposit are significantly enriched in Fe, Mn, and In, while depleted in Ga, Ge, and Cd, which is similar to the sphalerite in volcanic-associated massive sulfide(VMS) deposits. Co/Ni ratio of pyrrhotites in the stratiform ore bodies is similar to that in VMS-type deposits. The concentrations of Zn and Cd of chalcopyrites are similar to those of recrystallized VMS-type deposits. These characteristics also reflect the intermediate ore-forming temperature of the stratiform ore bodies in this deposit. Sulfur isotope compositions of sulfides are similar to those of VMS-type deposits, reflecting that sulfur originated from the Permian Miaoling Formation. Lead isotope compositions indicate mixed-source for lead. Moreover, the comparison of the Dongfengnanshan stratiform ore bodies with some VMStype deposits in China and abroad, on the trace elements and S–Pb isotope characteristics of the sulfides reveals that the stratiform ore bodies of the Dongfengnanshan deposit belong to the VMS-type, and have closely genetic relationship with the early Permian marine volcanic sedimentary rocks.     

方钠石的原位高压X射线研究

在室温下使用金刚石对顶砧（DAC）高压装置和同步辐射光源，对架状硅酸盐矿物方钠石进行了原位高压X射线衍射实验，最高压力达到17．4GPa。在研究的压力范围内观察到在3GPa左右方钠石发生了一次相变，且压力大于6．3GPa时，d222出现异常增大。对方钠石在高压下相变以及d222增大的原因进行了分析，认为方钠石结构中存在着充填大阳离子的多面体笼和孔道，高压下这些笼和孔道容易扭曲变形，从而造成结构的改变。     

A New Species of Coniopteris moguqiensis sp. nov. from the Middle Jurassic Wanbao Formation in Eastern Inner Mongolia,China

In recent years, an increasing number of plant fossil leaves and petrified woods have been discovered from the Middle Jurassic Wanbao Formation in Moguqi Town of Inner Mongolia, NE China. Here, we describe a new species of Coniopteris moguqiensis sp. nov. preserved as a fragment with fertile and sterile pinnules. The sterile ultimate pinnules are elongate ovate with sphenopteriod type venation, and fertile pinnules are usually isolated, bipinnate at least with the sorus apical, elliptical, 1 mm in diameter; sporangia are almost globular, 100–150 μm in diameter, and the annulus is vertical. In situ spores are rounded-triangular in polar view, 25–30 μm in diameter with sides straight and slightly convex; trilete, laesurae are thin and slightly straight; the exine surface is usually psilate under the light microscope but finely reticuloid sculptured on the proximal view under a scanning electronic microscope. The fern genus Coniopteris usually suggests a warm and humid environment, which is consistent with the palaeoclimatic conditions of petrified wood and megafossil plants. The new discovery further supplements the floral composition of the Wanbao Formation, providing new material for understanding the evolutionary trend and classification of Coniopteris.     

岩土工程原位测试CAD软件开发与应用

简要说明了岩土工程原位测试CAD软件的开发和应用过程，并对岩土工程原位测试中静载试验、静力触探、剪切波速、土钉和锚杆抗拔试验等CAD软件的使用做了较详细的说明。     

Dissipation Testing of Singapore Marine Clay by Piezocone Tests

In situ dissipation tests provide a means of evaluating the in situ coefficient of consolidation due to horizontal flow and hydraulic conductivity in horizontal direction in marine clays formation. Dissipation tests by means of piezocone were utilised in the characterisation of the coefficient of consolidation due to horizontal flow and the hydraulic conductivity in horizontal direction of Singapore marine clay at Changi. Piezocone dissipation tests were carried out prior to reclamation as well as after ground improvement with vertical drains to compare the changes in the coefficient of consolidation due to horizontal flow and hydraulic conductivity in horizontal direction prior to and after ground improvement. The quasi-static piezometric pressures from the dissipation tests were compared with piezometric pressures from piezometers to determine their possibility of future use as an alternative to piezometers. Post-improvement CPTU dissipation tests were carried out in the treated “Vertical Drain Area” as well as in an adjacent untreated “Control Area” for comparison purposes. This study provides support for the use of piezocone dissipation testing methods for the determination of the coefficient of consolidation due to horizontal flow and hydraulic conductivity in horizontal direction of marine clays in the region as well as an alternative to piezometer instrumentation for monitoring of piezometric pressure during consolidation.     

Tracing tsunami signatures of the ad 551 and ad 1303 tsunamis at the Gulf of Kyparissia (Peloponnese,Greece) using direct push in situ sensing techniques combined with geophysical studies

The western Peloponnese was repeatedly hit by major tsunami impacts during historical times as reported by historical accounts and recorded in earthquake and tsunami catalogues. Geological signatures of past tsunami impacts have also been found in many coastal geological archives. During the past years, abundant geomorphological and sedimentary evidence of repeated Holocene tsunami landfall was found between Cape Katakolo and the city of Kyparissia. Moreover, neotectonic studies revealed strong crust uplift along regional faults with amounts of uplift between 13 m and 30 m since the mid-Holocene. This study focuses on the potential of direct push in situ sensing techniques to detect tsunami sediments along the Gulf of Kyparissia. Direct push measurements were conducted on the landward shores of the Kaiafa Lagoon and the former Mouria Lagoon from which sedimentary and microfaunal evidence for tsunami landfall are already known. Direct push methods helped to decipher in situ high-resolution stratigraphic records of allochthonous sand sheets that are used to document different kinds of sedimentological and geomorphological characteristics of high-energy inundation, such as abrupt increases in grain size, integration of muddy rip-up clasts and fining upward sequences which are representative of different tsunami inundation pulses. These investigations were completed by sediment coring as a base for local calibration of geophysical direct push parameters. Surface-based electrical resistivity tomography and seismic data with highly resolved vertical direct push datasets and sediment core data were all coupled in order to improve the quality of the geophysical models. Details of this methodological approach, new in palaeotsunami research, are presented and discussed, especially with respect to the question of how the obtained results may help to facilitate tracing tsunami signatures in the sedimentary record and deciphering geomorphological characteristics of past tsunami inundation. Using direct push techniques and based on sedimentary data, sedimentary signatures of two young tsunami impacts that hit the Kaiafa Lagoon were detected. Radiocarbon age control allowed the identification of these tsunami layers as candidates for the ad 551 and ad 1303 earthquake and tsunami events. For these events, there is reliable historical data on major damage on infrastructure in western Greece and on the Peloponnese. At the former Mouria Lagoon, corroborating tsunami traces were found; however, in this case it is difficult to decide whether these signatures were caused by the ad 551 or the ad 1303 event.     

河北临漳曹村窑址青釉器物工艺特征研究

河北地区古代瓷窑产品的理化测试工作多集中于隋唐、宋金时期的器物,北朝等早期产品的分析数据则少有报道。本文运用X射线荧光光谱、X射线衍射、岩相、吸水率测试和烧成温度测定等分析方法,对曹村窑址出土青釉样品的工艺特征开展研究。结果表明,2件样品釉层氧化钙含量分别为17.86%和14.1%,烧成温度分别达到1150.1℃和1185.2℃,证明这2件样品属于青瓷,从而证实了曹村窑是已发现的我国北方早期烧制青瓷的窑口之一;其余样品釉层氧化铅含量大于42%,部分样品吸水率低于5%,X射线衍射结果显示胎体中出现莫来石相,证明曹村窑可以生产出瓷胎铅釉陶。结合样品烧成温度均在1000℃以上,远高于铅釉成熟温度,推断曹村窑的瓷胎铅釉陶在北朝时期已经使用了二次烧成工艺。这一复杂工艺的产生,有可能为唐三彩的出现作了技术铺垫。