云南天文台三孔较差视宁度监视仪的建立

较详细地讲述了云南天文台三孔较差视宁度监视仪的情况,然而,与一般天文理论和天文技术的专题研究不一样,天文仪器的研制有如说是研究,还不如说是归纳;它不是分析一个具体的尚未解决的难题,而是把许多已知的理论和技术综合起来,构成一台具体的仪器。所以,本文把许多至少是表面上互不相关的理论和技术问题归纳到一篇论文中。仪器是有许多模块组成的,为了看起来逻辑性较强,我们将仪器分模块叙述,全文遵循如下顺序：１在第一篇中,回顾世界各天文台视宁度测量设备的发展史和云南天文台的宁静度测量发展史;２在第二篇中,介绍：１）云南天文台三孔较差视宁度研制任务的来源,仪器的整体状况;２）介绍云南天文台三孔较差视宁度仪的硬件系统;３）介绍云南天文台三孔较差视宁度仪的软件系统;若大模块中有多个小模块,在每一个大模块中,又遵循下述顺序：１）本模块的总体功能;２）构成该模块的基本技术;３）这些基本技术如何构成整体和完成预定功能。３在第三篇中,介绍我们所作的与视宁度测量有关的一些实验和实验结果。     

Laboratory modelling of shear behaviour of soft joints under constant normal stiffness conditions

Shear behaviour of regular sawtooth rock joints produced from casting plaster are investigated under constant normal stiffness (CNS) conditions. Test results obtained in this investigation are also compared with the constant normal load (CNL) tests. It is observed that the peak shear stress obtained under CNL conditions always underestimates the peak shear stress corresponding to the CNS condition. Plots of shear stress against normal stress show that a nonlinear (curved) strength envelope is acceptable for soft rock joints subjected to a CNS condition, in comparison with the linear or bilinear envelopes often proposed for a CNL condition. Models proposed by Patton (1966) and Barton (1973) have also been considered for the predictions of peak shear stress of soft joints under CNS conditions. Although Patton's model is appropriate for low asperity angles, it overestimates the shear strength in the low to medium normal stress range at higher asperity angles. In contrast, while Barton's model is realistic for the CNL condition, it seems to be inappropriate for modelling the shear behaviour of soft joints under CNS conditions. The effect of infill material on the shear behaviour of the model joints is also investigated, and it is found that a small thickness of bentonite infill reduces the peak stress significantly. The peak shear stress almost approached that of the shear strength of infill when the infill thickness to asperity height ratio (t/a) reached 1.40. This paper also introduces an original, empirical shear strength envelope to account for the change in normal stress and surface degradation during CNS shearing. © Rapid Science Ltd. 1998     

Reddening of dune sands—evidence from southeast India

Thin section, SEM, and TEM analyses have indicated that the red ‘teri’ sands of southeast India have formed from weathering in situ of coastal dune sands. The data does not support a detrital origin for the red sands. C¹⁴ dates indicate that dune deposition and weathering, to a maximum depth of 10 m, leading to the formation of a hematite, koalinite and illite rich matrix has taken place rapidly over the past 25,000 years. It is postulated that garnet was a major source of hematite (ferric oxide).     

Strain fields and mechanical response of a highly to medium fissured bentonite clay

This article presents the developments of an ongoing research aimed at modelling the influence of fissuring on the behaviour of clays. In particular, it recalls the main results of an extensive laboratory investigation on a fissured bentonite clay from the south of Italy and presents the data of a new investigation on the evolution with shearing of the strain fields developing within the clay, resulting from Digital Image Correlation (DIC). Element test results are analysed in the framework of continuum mechanics and linked to the clay fissuring features, once characterised using the Fissuring IDentity (F‐ID) chart. This article compares the bentonite behaviour with that of other fissured clays of different F‐IDs, highlighting the common behavioural features. Thereafter, the soil response at the macro level is related to the DIC‐derived strain fields evolving within the clay with loading. For this purpose, DIC was successfully used to investigate the deformation processes active in the fissured clay and the sources of the localisation phenomena. DIC is shown to provide indications of the extent to which highly to medium fissured clays element test results can be of use to model the clay behaviour according to continuum mechanics. Copyright © 2012 John Wiley & Sons, Ltd.     

Internal testing of a numerical model of hillslope–channel coupling using laboratory flume experiments

The numerical model COUP 2D simulates the hydrological coupling between hillslopes and the river channel during a rainfall event. In order to test the numerical model, a 1:100 scaled laboratory flume which was modified to incorporate lateral hillslope elements, was used to run a series of experiments in which hillslope angle, channel angle, hillslope discharge and channel discharge were the varying parameters. Overall, there were 18 different experimental configurations with three replicates carried out for each condition, leading to a total of 54 experiments. These conditions were then used to parameterize and run COUP 2D. Internal model outputs of flow depth and flow velocity at four cross‐sections in the channel were compared to the measurements made in the physical model for the same parameter conditions. Statistical comparisons of the measured and modelled data were carried out for each experiment and across all experiments, using two goodness‐of‐fit measures—root mean square error and Nash–Sutcliffe coefficient of efficiency—in order to assess the performance of the model over an entire simulation as well as over all the simulations. The main effects on the goodness‐of‐fit measures for flow depth of each experimental variable, as well as the interactions between variables, were evaluated using statistical modelling. The results show that the model captures flow‐depth variations in response to changing channel and hillslope parameters. Statistical modelling suggests that the main effects on model error are cross‐section position, channel angle and channel discharge. Significant interactions also occur between all the channel variables and between the channel variables and hillslope discharge. The results of the testing procedure have significant implications for the consideration of different model components and for the interaction between data‐ and model evaluation. Copyright © 2007 John Wiley & Sons, Ltd.     

同幅双速跟踪成像CCD相机模拟电路系统设计

讨论了同幅双速跟踪成像技术对CCD相机系统的特殊要求,详细地介绍了该相机前端模拟系统的设计思想、系统结构和主要的电路模块。对系统中一些关键电路模块进行了仿真和测试,并对仿真和测试结果进行比较分析,以检验电路系统设计的合理性。     

Ex situ echo sounder target strengths of ice krill Euphausia crystallorophias

Ice krill is the keystone species in the neritic ecosystem in the Southern Ocean,where it replaces the more oceanic Antarctic krill. It is essential to understand the variation of target strength(TS in d B re 1 m 2) with the different body size to accurately estimate ice krill stocks. However,there is comparatively little knowledge of the acoustic backscatter of ice krill. The TS of individual,formalin-preserved,tethered ice krill was measured in a freshwater test tank at 38,120,and 200 k Hz with a calibrated split-beam echo sounder system. Mean TS was obtained from 21 individual ice krill with a broad range of body lengths(L :13–36 mm). The length( L,mm) to wet weight( W; mg) relationship for ice krill was W =0.001 218×103 × L 3.53( R 2= 0.96). The mean TS-to-length relationship were TS3 8 k Hz =-177.4+57log 10( L),( R 2 = 0.86); TS 120 k Hz =-129.9+31.56 log 10( L),( R 2 =0.87); and TS 200 k Hz =-117.6+24.66log1 0( L),( R 2 =0.84). Empirical estimates of the relationship between the TS and body length of ice krill were established at 38,120,and 200 k Hz and compared with predictions obtained from both the linear regression model of Greene et al.(1991) and the Stochastic Distorted Wave Born Approximation(SDWBA) model. This result might be applied to improve acoustic detection and density estimation of ice krill in the Southern Ocean. Further comparative studies are needed with in situ target strength including various body lengths of ice krill.     

Ӧ�ǵش�̨��Ź۲⻷������

??????????????????????????????????????????????????????в?????????????????????????????????????????????≤1 nT/m????????????≤0.1 nT?????????????????????????????????????????????????????в???????????????????????????????????     

运用STOMP数值模拟器进行多空介质中尿素水解以及方解石沉淀数值模拟

遍布于美国能源部所辖野外场地的地下放射性核素和痕量金属污染对美国能源部的长期监管职能提出了最严峻的挑战。目前较有前景的一个原地固化污染物方法是利用尿素酶催化尿素水解,进而推动方解石沉淀及与之共同沉淀。运用STOMP数值模拟器实施一系列反应性溶质数值模拟来研究系统中水流、运移、反应与反应导致的介质性质变化之间的紧密的非线性耦合,并在研究中系统性增加反应系统的复杂度和物理-化学的非均质性以考察模拟效果。通过调整反应速率表达式中尿素酶浓度和沉淀反应常数,对尿素水解和方解石沉淀速率进行了敏感度分析。结果显示:尿素水解速率是矿物沉淀总量的决定性因素,沉淀物的空间分布既取决于水解速率也取决于沉淀速率;在一维水流柱6个空隙体积的时间段模拟中,观察到了5%的最大空隙度减少;当二维模拟中考虑一个低渗透性包裹体时,被改变的流场重新对生成的沉淀组成物进行了分布,形成了扭曲的反应锋面。模拟结果也显示沉淀在低渗透性区域边界上形成,这说明位于这个区域里面的污染物可能被囊裹而从流线中被隔离起来。