The ALOMAR Rayleigh/Mie/Raman lidar: objectives, configuration, and performance

We report on the development and current capabilities of the ALOMAR Rayleigh/Mie/Raman lidar. This instrument is one of the core instruments of the international ALOMAR facility, located near Andenes in Norway at 69°N and 16°E. The major task of the instrument is to perform advanced studies of the Arctic middle atmosphere over altitudes between about 15 to 90 km on a climatological basis. These studies address questions about the thermal structure of the Arctic middle atmosphere, the dynamical processes acting therein, and of aerosols in the form of stratospheric background aerosol, polar stratospheric clouds, noctilucent clouds, and injected aerosols of volcanic or anthropogenic origin. Furthermore, the lidar is meant to work together with other remote sensing instruments, both ground- and satellite-based, and with balloon- and rocket-borne instruments performing in situ observations. The instrument is basically a twin lidar, using two independent power lasers and two tiltable receiving telescopes. The power lasers are Nd:YAG lasers emitting at wavelengths 1064, 532, and 355 nm and producing 30 pulses per second each. The power lasers are highly stabilized in both their wavelengths and the directions of their laser beams. The laser beams are emitted into the atmosphere fully coaxial with the line-of-sight of the receiving telescopes. The latter use primary mirrors of 1.8 m diameter and are tiltable within 30° off zenith. Their fields-of-view have 180 rad angular diameter. Spectral separation, filtering, and detection of the received photons are made on an optical bench which carries, among a multitude of other optical components, three double Fabry-Perot interferometers (two for 532 and one for 355 nm) and one single Fabry-Perot interferometer (for 1064 nm). A number of separate detector channels also allow registration of photons which are produced by rotational-vibrational and rotational Raman scatter on N₂ and N₂+O₂ molecules, respectively. Currently, up to 36 detector channels simultaneously record the photons collected by the telescopes. The internal and external instrument operations are automated so that this very complex instrument can be operated by a single engineer. Currently the lidar is heavily used for measurements of temperature profiles, of cloud particle properties such as their altitude, particle densities and size distributions, and of stratospheric winds. Due to its very effective spectral and spatial filtering, the lidar has unique capabilities to work in full sunlight. Under these conditions it can measure temperatures up to 65 km altitude and determine particle size distributions of overhead noctilucent clouds. Due to its very high mechanical and optical stability, it can also employed efficiently under marginal weather conditions when data on the middle atmosphere can be collected only through small breaks in the tropospheric cloud layers.     

IMPACT: an implicit time integration scheme for chemical species and families

The implicit time integration scheme of Stott and Harwood (1993) was proposed as an efficient scheme for use in three-dimensional chemical models of the atmosphere. The scheme was designed for chemistry schemes using chemical families, in which species with short lifetimes are grouped into longer-lived families. Further study with more complex chemistry, more species and reactions showed the scheme to be non-convergent and unstable under certain conditions; particularly for the perturbed chemical scenarios of polar stratospheric winters. In this work the scheme has been improved by revising the treatment of families and the convergence properties of the scheme. The new scheme has been named IMPACT (IMPlicit Algorithm for Chemical Time-stepping). It remains easy to implement and produces simulations that compare well with integrations using more accurate higher order schemes.     

利用场地观测计算地表通量

高原地表的感热和潜热通量在亚洲季风系统中有很重要的作用。由于高原地域辽阔，且自然环境较严酷，不利于建立完善的地面观测系统。因此，卫星遥感观测就成为测算高原整体感热和潜热通量的有效工具。地面场地的观测结果作为地表通量的真实值，对于卫星遥感测算是非常重要的。它也为构建陆面—大气模型提供了科学依据，是卫星资料的资料同化系统中的重要组成部分。 计算场地热量通量有几种不同的处理方法。最简单的方法利用有效的观测和试验的参数，可以给出稳定连续的估计。愈精确的Bowen比或者廓线的观测能给出愈精确的信息。综合了湍流测量及辐射测量、土壤热通量的观测结果的估计对陆面—大气相互作用进行了详细的描述，以适应模式的发展。从1998年开始，这些方法联合应用到青藏高原；场地通量观测方面的成果以及目前对其理解将在本文中做一概述。     

New method for in situ characterization of loose material for landslide mapping purpose

The assessment of grain size distribution and plasticity of loose geological material, during in situ geological investigations, is not obvious. Visual appreciation allows an approximative quantification of the coarse granulometric fractions, but not of the fine ones. Field soils determination methods suggested until now, are visual and tactile tests leading to a very rough estimate, which is only qualitative and not very reproducible. The new proposed field test (GEOLEP method) allows a quick quantification of the fine fraction of loose material. It allows the determination of the sand fraction (fine and medium grained sands) as well as the methylene blue value of the samples. The necessary equipment to perform this test is light and compact and the time needed to analyze one sample is approximately 15 min. Thus it is also possible to carry out numerous measurements in one day. The calibrations were carried out on a selection of 13 natural samples, chosen for their representativeness of the typical alpine quaternary deposits. The results obtained with GEOLEP method are relevant compared with standardized laboratory tests; the obtained correlation indexes are of 73% for the comparison with laboratory stain test results and of 89% with a laboratory method using a similar procedure than the field test. The correlation we performed with Atterberg's limits tests shows that a rough approximation of plasticity index can also be obtained (R² = 75%). This method thus brings a new tool which should allow taking into account the lithological factor (by some quantitative and representative variables) in a reliable way for the evaluation of landslide hazards.     

Solubility of FeO in (Mg,Fe)SiO3 perovskite and the post-perovskite phase transition

Phase relations in Mg_0.5Fe_0.5SiO₃ and Mg_0.25Fe_0.75SiO₃ were investigated in a pressure range from 72 to 123 GPa on the basis of synchrotron X-ray diffraction measurements in situ at high-pressure and -temperature in a laser-heated diamond-anvil cell (LHDAC). Results demonstrate that Mg_0.5Fe_0.5SiO₃ perovskite is formed as a single phase at 85–108 GPa and 1800–2330 K, indicating a high solubility of FeO in (Mg,Fe)SiO₃ perovskite at high pressures. Post-perovskite appears coexisting with perovskite in Mg_0.5Fe_0.5SiO₃ above 106 GPa at 1410 K, the condition very close to the post-perovskite phase transition boundary in pure MgSiO₃. The coexistence of perovskite and post-perovskite was observed to 123 GPa. In addition, post-perovskite was formed coexisting with perovskite also in Mg_0.25Fe_0.75SiO₃ bulk composition at 106–123 GPa. In contrast to earlier experimental and theoretical studies, these results show that incorporation of FeO stabilizes perovskite at higher pressures. This could be due to a larger ionic radius of Fe²⁺ ion, which is incompatible with a small Mg²⁺ site in the post-perovskite phase.     

中国大陆科学钻探主孔榴辉岩中石榴石和绿辉石原位激光探针分析及其成岩成矿指示意义

本文以中国大陆科学钻探主孔0～2000m岩芯中的榴辉岩为对象,运用EMPA和LA-ICP-MS技术,系统测定了榴辉岩中石榴石和绿辉石的主量与微量元素组成,并据此讨论了它们的成岩成矿意义.研究结果表明,CCSD主孔榴辉岩中石榴石富重稀土和Sc、Y、Co,而绿辉石则富中稀土和Pb、Sr、V,石榴石和绿辉石的高场强元素(特别是Nb、Ta)含量均很低.石榴石存在不同程度的Ce负异常,指示榴辉岩的形成过程中卷入有地表氧化条件下形成的风化沉积物.石榴石具有低的Zr/Y比值,绿辉石普遍具有高的Sr含量,这些特征说明榴辉岩(特别是高钛榴辉岩)的原岩可能为遭受过壳源物质混染与交代的富集地幔部分熔融的产物.高钛与低钛榴辉岩中石榴石和绿辉石在主量及微量元素组成上存在一定差别,总体而言,高钛榴辉岩中石榴石具高的MgO含量和较高的MgO/TFeO比值,以及较高的稀土和Sc含量,而绿辉石则相对富TFeO、MnO,并具有较高的Sr、Zr、Hf含量.高钛榴辉岩中石榴石和绿辉石常出现不同程度的Eu正异常,Cr含量均显著低于低钛榴辉岩.综合分析表明,高钛榴辉岩的原岩最可能为富斜长石的辉长质侵入岩,原岩组成的差异应是导致二类榴辉岩中石榴石和绿辉石矿物化学组成存在差异的主要原因.     

X-ray binary unified analysis: pulse/RV application to Vela X1: GP Velorum

A procedure for simultaneous analysis of multiple kinds of observations is developed for binaries that contain X-ray pulsars. A wide variety of observation types might be included, although we consider only velocity: pulse and light: velocity: pulse cases at present. The model operates with equipotentials and can accommodate non-synchronous rotation and eccentric orbits. The duration condition imposed by observed X-ray eclipses is incorporated as an embedded constraint, so that only solutions consistent with the eclipse duration are found. Relations needed for the method of differential corrections in least-squares solutions are specified, and we apply the Marquardt scheme for improvement of solution convergence. Parameters of Vela X1: GP Velorum are obtained from seven combinations of pulse and radial velocity data. The estimated masses are thereby put into some perspective, especially for the neutron star. The mass of the supergiant ( m  sin³  i ) now ranges only ±5 per cent from the mean of seven results, although the uncertainty in i makes the actual mass range larger. We discuss the determinacy of certain parameters and their historical consistency. For example, the systemic radial velocity differs among spectroscopic data sets by more than 20 km s⁻¹. We show that, contrary to published assertions, the orbital inclinations of high-mass X-ray binaries are essentially indeterminable by the usual methods, although lower limits to inclination may be meaningful for some examples.     

TRIFFID Photometry of Globular Cluster Cores — I. Photometric Techniques and Variable Stars in M15

The Galway/DIAS Image Sharpening Camera, TRIFFID, has been used to make observations in two colours of the centre of the post-core-collapse globular cluster M15. We present here our analysis of the photometry in B over two seasons. We have combined the complementary qualities of the HST 's high astrometric precision and TRIFFID's extended coverage and photometric precision, to perform crowded-field photometry in the innermost region of M15. Our technique virtually eliminates the problem of extreme crowding which has hitherto hampered studies of the variable star populations in globular cluster cores, and thereby provides an extension of the HST 's capability. Candidate variables detected with the HST have been confirmed and monitored over longer periods. We show that most of these are RR Lyrae stars, and that one is a short-period Type II Cepheid (the third to be discovered in M15). Our photometric study also produced evidence of a similar number of new variables. These also appear to be RR Lyrae stars, except for a possible eclipsing system. Further data from an upgraded version of TRIFFID have recently been obtained to help to refine the light curves of all these objects.     

An optimal extraction algorithm for imaging photometry

This paper is primarily an investigation of whether the 'optimal extraction' techniques used in CCD spectroscopy can be applied to imaging photometry. It is found that using such techniques provides a gain of around 10 per cent in signal-to-noise ratio over normal aperture photometry. Formally, it is shown to be equivalent to profile fitting, but offers advantages of robust error estimation, freedom from bias introduced by mis-estimating the point spread function, and convenience. In addition some other techniques are presented, which can be applied to profile fitting, aperture photometry and the 'optimal' photometry. Code implementing these algorithms is available at http://www.astro.keele.ac.uk/~timn/.