Oxidation of As-bearing gold ore—a comparison of batch and column experiments

This study deals with the experimental determination of the rate of weathering and As release from Au-bearing sulfide ores of the Mokrsko-West deposit (Czech Republic). The elevated As contents in the ore and the possible As mobilisation must be taken into account due to the close proximity of the deposit to the Vltava River, a source of drinking water for Prague. Crushed and homogenized ore material was divided into four grain-size fractions showing uniform chemical and mineralogical composition and subjected to batch and column leaching experiments. The most important reactions controlling metal leaching include (i) oxidation of sulfides, (ii) carbonate equilibrium and (iii) precipitation of hydrated ferric oxides (HFO). Hydrated ferric oxides were found to be important sorbents of mobilized As. The highest concentration of As in the leachates was obtained from the 64–1000 μm fraction. The oxidation rate in the agitated batch experiment calculated on the basis of sulfate concentrations is an order of magnitude higher (3.8×10⁻⁹ to 4.4×10⁻⁸ mol SO₄²⁻ h⁻¹ g⁻¹) than in the static column experiment (9.6×10⁻¹⁰ to 7.4×10⁻⁹ mol SO₄²⁻ h⁻¹ g⁻¹). The higher oxidation rate of batch experiments is explained by abrasion of oxidation products (mainly HFO) and by further exposition of reaction surfaces of the sulfide grains.     

Counting Beans: Agrobiodiversity,Indigeneity, and Agrarian Reform

In‐field conservation of locally domesticated crop varieties ameliorates agrobiodiversity losses, but the interaction among nationally regulated socioeconomic factors at the local scale tends to discourage this. Analyses of household surveys conducted in Ecuador demonstrate that state and nongovernmental institutions interact to discourage cultivation of locally domesticated varieties of beans (Phaseolus spp.). Land privatization, agricultural extension, and credit programs favor market production of introduced modern bean varieties, and locally domesticated varieties are noted for favorable nutrition, culinary, and agroecological qualities. Resolving disconnections between the market and social values for landrace beans may provide agrobiodiversity conservation opportunities.     

Analysis of pressuremeter geometry effects in clay using critical state models

The conventional interpretation methods of pressuremeter testing effectively approximate pressuremeter membranes as infinitely long. As a result, the effects of the two‐dimensional geometry of pressuremeters are ignored, leading to an overestimation of soil shear strength by pressuremeter testing, as demonstrated in several previous studies. This paper presents results of a numerical study of two‐dimensional geometry effects on self‐boring pressuremeter tests in undrained clay. The results are obtained using critical state soil models with an effective stress formulation. This is in contrast to most (if not all) existing studies on pressuremeter geometry effects, which were based on perfectly plastic soil models (e.g. Yu (Cavity expansion theory and its application to the analysis of pressuremeters. DPhil Thesis, The University of Oxford, 1990), Yeung and Carter (Proc. 3rd Int. Symp. on Pressuremeters, 1990), and Houlsby and Carter (Géotechnique, 1993; 43 (4):567–576)). The present study suggests that the overestimation of soil strength due to the neglect of finite pressuremeter length is significantly affected by the soil model used in the calculations. It is found that for clays with a high overconsolidation ratio (OCR) the strength overestimation predicted using critical state soil models could be considerably smaller than that predicted using perfectly plastic soil models. The main conclusion of this numerical study is that care must be exercised before directly applying any numerically determined pressuremeter geometry correction factors in practice. Copyright © 2005 John Wiley & Sons, Ltd.     

A numerical study of mechanical behavior of a cement paste under mechanical loading and chemical leaching

Based on relevant experimental data of a petroleum cement paste under mechanical loading and chemical leaching, an elastic‐plastic model is first proposed by taking into account plastic shearing and pore collapse. The degradation of mechanical properties induced by the chemical leaching is characterized by a chemical damage variable which is defined as the increase of porosity. Both elastic and plastic properties of the cement paste are affected by the chemical damage. The proposed model is calibrated from and applied to describe mechanical responses in triaxial compression tests respectively on sound and fully leached samples. In the second part, a phenomenological chemical model is defined to establish the relationship between porosity change and calcium dissolution process. The dissolution kinetics is governed by a diffusion law taking into account the variation of diffusion coefficient with calcium concentration. The chemical model is coupled with the mechanical model, and both are applied to describe mechanical response of cement paste samples subjected to progressive chemical leaching and compressive stresses. Comparisons between experimental data and numerical results are presented.     

原地栖息真菌Talaromyces flavus作用下不同粒径利蛇纹石的风化作用研究

主要研究了原地栖息真菌Talaromyces flavus作用下不同粒径的蛇纹石矿物粉末的风化作用。蛇纹石矿物粉末被筛分为不同粒度的4组(150~300、100~150、75~100和45~75μm)后进行真菌溶蚀实验,并使用p H计、ICP-OES、FTIR、XRD、SEM对反应产物进行了分析。结果表明,真菌作用显著加快了蛇纹石矿物的溶蚀,当蛇纹石矿物粒度降低到100μm左右时,Mg的溶出率从21.56%明显增加到35.91%。该现象可能与矿物比表面积的增大以及生物物理作用的增强有关。在此基础上粒径进一步减小并未使Mg溶出率明显提高,因此该粒径可以作为真菌对蛇纹石溶解工业化应用的最优粒径。扫描电镜观察与矿物相分析表明,反应过程中真菌分化产生的菌丝与矿物紧密接触,破坏了矿物的晶体结构,导致矿物相的改变。该研究结果可为相关菌种在浸矿等工业领域上的应用提供参考依据。     

沂源地区不同类型岩土淋溶水与浸泡水的化学特征分析

为研究降水补给地下水过程中包气带岩土对水化学的影响,在沂源地区采集了不同地表岩土样品开展淋溶和浸泡试验。淋溶结果显示:易溶的Cl~-、SO_4~(2-)、CO_3~(2-)、NO_2~-、NO_3~-等阴离子率先溶解进入淋溶水中,之后K~+,Ca~(2+),Mg~(2+),Fe等含量逐渐增加,且淋溶初期p H值呈碱性,之后向中性过渡。浸泡结果显示:不同类型岩土样经过浸泡5min后,其水化学组分发生了显著变化;随浸泡时间增加,K~+、Na~+、Ca~(2+)、Mg~(2+)、HCO_3~-及含盐量均出现不同程度增加,但Cl~-、SO_4~(2-)在不同类型岩土中含量变化则是不同的。由此推测,降水转入地下水过程中,透过地表浅层包气带时就已经淋溶了大量物质,水化学性质发生了重大变化。     

LA-ICP-MS测定锡石U-Pb同位素年龄时两种普通铅扣除方法的原理及适用性比较

根据近年来激光烧蚀电感耦合等离子体质谱仪锡石微区原位U-Pb同位素定年的实验结果,结合相关资料,对实验过程中普通铅扣除的2种主要方法,即谐和图法和等时线法的原理、效果、优点和局限性进行了深入的比较。研究成果表明,2种主要方法各有不同的优点及局限性。在实际工作中,要想获得比较准确的测试结果,需要根据具体矿物样品的年龄范围、总的U和Pb含量、普通铅相对含量、测年精度要求等因素,灵活地选择普通铅扣除的方法。     

Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.     

土壤入渗对阜新市北部浅层地下水总硬度影响的淋滤实验

本次室内土柱淋滤实验通过改变Na~+、H~+、NH_4~+浓度来模拟现实生活中不同浓度的生活污水、酸雨及农业施肥灌溉对浅层地下水总硬度的影响过程。实验结果表明淋滤液浓度越高,所对应的淋出液的总硬度峰值就越高。相同浓度的Na~+、H~+、NH_4~+进行土柱淋滤实验时,NH_4~+所对应的淋出液总硬度的峰值最大,H~+次之,Na~+最小且NH_4~+所对应的整个实验用时最短,在相同浓度单一离子作用下NH_4~+对浅层地下水硬度的影响更加明显。     

几内亚福雷卡里亚YML铁矿区的富铁矿床地质特征及找矿前景探讨

YML铁矿区位于几内亚福雷卡里亚省,富铁矿以条带状赤铁矿和铁角砾岩矿为主。矿区内共发育7条矿体,条带状赤铁矿体6条,铁角砾岩矿体1条。条带状赤铁矿体赋存部位多为向形地段,次级紧密褶皱发育,沿走向和倾向有逐渐变薄和尖灭的趋势;铁角砾岩矿体覆盖于地表,以风化壳的形式出现。矿床类型属复合类型,即海底热液喷气沉积叠加后期构造变质型+风化淋滤型。该区具备铁矿形成和保存的地质条件,且已发现具一定储量、品位较高的条带状赤铁矿和大面积的铁角砾岩分布区,区内铁矿找矿远景较好。